Electrochemical and Spectroscopic Studies on the Interaction of Malachite Green with DNA and Its Application

The interaction of malachite green (MG) with double‐stranded DNA (dsDNA) in pH 7.0 Britton–Robinson (B–R) buffer solution was investigated by electrochemical and spectrophotometric methods. Within the potential scan range of ?1.0 to +1.5 V (vs. SCE), MG has two oxidative peaks at 0.547 V and 0.833 V and one reductive peak at 0.362 V on cyclic voltammogram at the scan rate of 0.20 V/s. After the addition of dsDNA into the MG solution, the oxidative peak current at 0.547 V decreases obviously. The electrochemical parameters, such as the charge transfer coefficient (α), the surface reaction rate constant (k_s) and the diffusion coefficient (D), were calculated and compared between in the absence and presence of dsDNA. The results show that these parameters of MG after adding dsDNA have greatly changed, which indicates that an electrochemical active complex was formed. The interaction mechanisms of MG with dsDNA are discussed in some details from the electrochemistry and UV‐vis spectrophotometry. The reduction of the peak current of MG after adding dsDNA was further used for the quantification of dsDNA by differential pulse voltammetry (DPV). The linear range for dsDNA is in the range of 10.0–100.0 μg/mL with the linear regression equation as Δi_p (μA)=0.065+0.0096 C (μg/mL) and the detection limit of 6.0 μg/mL (3σ). The influences of coexisting substances were investigated and artificial samples were determined with satisfactory results.     

Kinetic studies of antimony and selenium atomization processes including a chemical modifier during their determination by electrothermal atomic absorption spectrometry

We have studied antimony and selenium atomization processes including a chemical matrix modifier (palladium-containing activated carbon) during their determination by electrothermal atomic absorption spectrometry. We have developed and fine-tuned an experimental setup for determining the kinetic characteristics (activation energy and frequency factor) for element atomization processes from measurements in the initial section of the analytical signal. We provide a rationale for the most likely mechanism for the interactions that occur. The results of the kinetic studies of the atomization processes showed that the modifier we developed was highly effective, as a result of formation of a thermally stable condensed system C-Pd-A (where A is the analyte). __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 530–534, July–August, 2006.     

Fabrication and characterization of sputtered titanium dioxide films

TiO₂ thin films were prepared under various conditions by using a reactive RF sputtering technique. The structural, optical and electrical characteristics of the films have been investigated. All as-deposited films were amorphous. After annealing at T > 673 K, the crystallinity of the observed tetragonal anatase phase appeared improved. The optical band gap, determined by using Tauc plot, has been found to amount to 3.38 ± 0.03 and 3.21 ± 0.03 eV for the direct and indirect transition, respectively. Also the complex optical constants for the wavelength range 300-2500 nm are reported. Using the two-point probe technique, the dark resistivity has been measured as a function of the film thickness, d. The resistivity, ρ, of the samples has been found to decrease markedly with increasing thickness, but only for d < 100 nm. The behaviour of ρd versus d was found to fit properly with the Fuchs and Sondheimer relation with parameters ρ_o = 4.95 × 10⁶ Ω cm and mean free path, l = 310 ± 2 nm. The log ρ versus 1/T curves show three distinct regions with values for the activation energy of 0.03 ± 0.01, 0.17 ± 0.01 and 0.50 ± 0.02 eV, respectively.     

Probing antiferromagnetic order with heat capacity in exchange-biased structures

We explore the magnetic heat capacity in exchange-biased ferromagnet/antiferromagnet bilayers theoretically. We show that changes in the antiferromagnetic structure due to the reversal of the ferromagnet layer can be detected by distinct features in the heat capacity. This offers a method for probing antiferromagnetic domains in exchange-biased systems.     

接枝羧基的有限长碳纳米管电子结构的第一性原理研究

基于局域密度泛函理论，采用第一性原理方法，建立了对(5,5)型和(9,0)型有限长碳纳米管接枝羧基官能团的原子模型，通过计算其电子分布和态密度的变化，讨论羧基官能团对碳纳米管电子结构和电子输运特性的影响. 计算表明，接枝羧基的碳纳米管,其电子结构明显改变，其费米能级上的电子态密度下降；最高占据轨道上的非定域程度减弱,致使电子输运性能呈下降趋势. 关键词： 碳纳米管 密度泛函理论 电子结构     

溶胶-凝胶VO2薄膜转换特性研究

利用溶胶凝胶法在SiO2Si衬底上沉积高取向的V2O5薄膜,在压强低于2Pa,温度高于400℃的条件下,对V2O5薄膜进行真空烘烤,获得了电阻率变化3个数量级以上、弛豫宽度为62℃的VO2多晶薄膜.以X射线衍射(XRD)、扫描电子显微镜(SEM)图和电阻率转换特性等实验结果为依据,详细分析了溶胶凝胶薄膜在真空烘烤时从V2O5向VO2的转化,它经历了从VnO2n+1(n=2,3,4,6)到VO2的过程.实验证明,根据选择合适的成膜热处理条件和真空烘烤条件是实现溶胶凝胶V2O5结构向VO2结构成功转换的关键 关键词： 溶胶-凝胶法 氧化钒薄膜 VO2膜转换特性     

Very high coercivities of top-layer diffusion Au/FePt thin films

The Au/FePt samples were prepared by depositing a gold cap layer at room temperature onto a fully ordered FePt layer, followed by an annealing at 800 °C for the purpose of interlayer diffusion. After the deposition of the gold layer and the high-temperature annealing, the gold atoms do not dissolve into the FePt Ll₀ lattice. Compared with the continuous FePt film, the TEM photos of the bilayer Au(60 nm)/FePt(60 nm) show a granular structure with FePt particles embedded in Au matrix. The coercivity of Au(60 nm)/FePt(60 nm) sample is 23.5 kOe, which is 85% larger than that of the FePt film without Au top layer. The enhancement in coercivity can be attributed to the formation of isolated structure of FePt ordered phase.     

Polarization inscription in ferroelectric (111) PZT and (100) SBT films

Ferroelectric thin films form an equilibrium domain structure compatible with their respective crystallographic symmetry. In tetragonal (111) PZT, 90° domains prevail; in (pseudo-tetragonal) (100) SBT both 90° and 180° domains are present. The size of 90° domains has been measured for e.g., PZT as slabs of 15 nm width. Domain size is a result of stress minimization in the film during the paraelectric (PE) → ferroelectric (FE) transition. A precise and regular domain pattern for (111) PZT and (100) SBT films has been investigated in detail by TMSFM. Single domains can be addressed mechanically with the tip of an AFM. Such single domain switching corresponds to a data storage density of 200 Gbit/inch². Applications of ferroelectric and high- paraelectric materials for e.g., non-volatile data storage replacing DRAM devices or as sensors in infrared cameras are increasingly becoming popular.     

Solubility of carbon dioxide in aqueous solutions of sodium chloride: Experimental results and correlation

The solubility of carbon dioxide in aqueous solutions of sodium chloride was measured in the temperature range from 40 to 160°C, up to 6 mol-kg salt solutions and total pressures up to 10 MPa. Pitzer's⁽¹⁾ equations as well as the Chen and Evans⁽²⁾ model were used to correlate the new data. Results are reported and compared to literature data and correlations.