Synthesis and characterization of novel fluorinated polyurethane elastomers based on 2,2‐bis[4‐(4‐amino‐2‐trifluoromehyloxyphenyl) phenyl]propane

2,2‐Bis[4‐(4‐amino‐2‐trifluoromehyloxyphenyl) phenyl]propane (BAFPP) was synthesized based on 2‐chlorobenzotrifluoride and bisphenol A and characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance. BAFPP was used as a chain extender to prepare a series of fluorine‐containing polyurethane elastomers (FPUEs) with different fluorine contents by changing the soft segments and isocyanate index (R). The FPUEs were investigated by water absorption, contact angle, X‐ray photoelectron spectroscopy, thermogravimetric analysis, and microscale combustion calorimetry. The results show that the FPUEs prepared from BAFPP were elastomers that have low surface tension, low water absorption, and good thermal stability. Furthermore, FPUEs also exhibit good flame resistance, and the peak heat release rate of FPUE based on BAFPP (282.9 W/g) is much lower than that of polyurethane elastomer without the F element (537.2 W/g). Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation and properties of thermally stable polyimides derived from asymmetric trifluoromethylated aromatic diamines and various dianhydrides

A novel method for the preparation of an asymmetric fluorinated aromatic diamine, 3,4′-bis(4-amino-2-trifluoromethylphenoxy)-benzophenone was investigated. This new diamine containing trifluoromethyl side group was synthesized from the nucleophilic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 3,4′-dihydroxybenzo phenone in the presence of potassium carbonate, followed by catalytic reduction with SnCl₂·6H₂O and concentrated hydrochloric acid. This novel diamine was used to react with different commercially available aromatic tetracarboxylic dianhydrides to prepare polyimides via thermal or chemical imidization. The polyimide properties such as inherent viscosity, solubility, thermal and surface properties were investigated to illustrate the contribution of the trifluoromethyl group and the asymmetry structure of the polyimide. The polyimides obtained had good thermal stability and the glass transition temperature values ranged from 225 to 267 °C. All of these novel polyimides held 10% weight loss at the temperature above 543 °C in air and left more than 47% residue even at 800 °C in nitrogen. The inherent viscosities of the obtained polyimides were above 0.73 dL/g and were easily dissolved in both polar, aprotic solvents and some low-boiling-point solvents. Moreover, these PI films had dielectric constants of 2.94-3.53 (1 kHz), with moisture absorption in the range of 0.07-0.34 wt%. In comparison of the PIs (5) series with the analogous symmetric PIs (6) series based on 4,4′-bis(4-amino-2-trifluoromethylphenoxy)-benzophenone, the (5) series revealed better solubility, low dielectric constant and moisture absorption.     

Ultrasonicwave-assisted tandem-reaction for synthesis of symmetrical vicinal diamines

A practical synthesis of symmetrical vicinal diamines with broad chemistry scope is described.The key step is the ultrasonicwave promoted tandem-reaction,two-step reaction sequence combining Mannich double condensations with benzo- triazole,glyoxal and primary or secondary amines and reduction of the bis(benzotriazole)-adducts with sodium borohydride proceeded smoothly in tetrahydrofuran in high yield at room temperature.     

Copper(I) catalysis: Synthesis of N,N′-diarylated and N-aryl,N′-formylated chiral C2-symmetric diamines

Chiral N,N′-diaryl C₂-symmetric diamines and N-aryl,N′-formyl-trans-(1R,2R)-diaminocyclohexane are readily accessed by copper catalyzed N,N′-diarylation and N-aryl,N′-formylation of trans-(1R,2R)-diaminocyclohexane with aryl bromides. N,N′-diarylation using (R)-1,1′-binaphthyl-2,2′-diamine and iodobenzene gave the corresponding (R)-N,N′-diphenyl-1,1′-binaphthyl-2,2′-diamine derivative in 83% yield.     

Synthesis and characterization of copolymers of β-cyclodextrin derivatives

Cyclodextrins (CDs) are cyclic oligosaccharides made up of d-glucose units connected by 1,4-glucosidic linkages. β-CD is a cyclical starch derivative containing seven glucopyranose units. β-CD derivatives have characteristic property of larger surface area, robust mechanical strength, high surface to volume ratio, electrical and optical properties for analyte determination, good dispersion, easy removal of the template, surface modification, functionalization and handling capacity. In this work, an attempt is made to prepare succinyl-β-CD-acrylamide (S-β-CD-AA) copolymer and β-CD-malic anhydride (β-CD-MAH) copolymer. For the synthesis of S-β-CD-AA, S-β-CD derivative is prepared and further, acrylamide (AA) along with cross-linker undergoes free radical copolymerization for the formation of gel like product. The degree of succinylation (DS) of β-CD derivative is estimated. S-β-CD-AA copolymer showed potential swelling, and deswelling characteristic. Another copolymer is prepared from β-CD malic anhydride derivative. Further, the derivative is treated with cellulose and ethylene diamine tetra acetate (EDTA) to form β-CD-MAH copolymer. The two derivatives are characterized by several techniques. Thermal stability of these copolymers is estimated with the help of thermogravimetric analysis. The basic characterization of the presence of functional groups is done using UV–visible spectroscopy, and infrared spectroscopy. The elemental analysis helped to estimate C, H, N, S in the synthesized compounds. The surface morphology characterization is done with the help of scanning electron microscopy. X-ray diffraction analysis helped in determination of crystal structure of β-CD-MAH. β-CD derivatives prepared may be potential candidate to prepare inclusion complex, in drug delivery, drug loading and several similar applications.