Cu-Mn-Zn/Y直接合成二甲醚催化剂中锌和锰的协同调节作用

通过对Y型分子筛负载Cu-Mn、Cu-Zn和Cu-Mn-Zn催化剂的结构、表面性质及其直接合成二甲醚反应活性的对比,发现Mn和Zn对催化剂还原性能的影响作用相反,对催化剂吸附H₂和CO的影响也不同。Mn和Zn的单独添加或共同添加引起催化剂结构和组分之间相互作用程度的改变,是造成催化剂活性和选择性变化的主要原因。两者的协同作用,能调整催化剂的还原性能和吸附性能达到适合的状态,从而使得催化剂具有高的二甲醚合成活性。     

Research Progress on Typical Quaternary Ammonium Salt Polymers

Quaternary ammonium salt polymers, a kind of polyelectrolyte with a quaternary ammonium group, are widely used in traditional and emerging industries due to their good water-solubility, adjustable cationicity and molecular weight, high efficiency and nontoxicity. In this paper, firstly, the properties and several synthesis methods of typical quaternary ammonium salt monomers were introduced. Secondly, the research progress on the synthesis of polymers was summarized from the perspective of obtaining products with high molecular weight, narrow molecular weight distribution and high monomer conversion, and special functional polymers. Thirdly, the relationships between the structures and properties of the polymer were analyzed from the perspectives of molecular weight, charge density, structural stability, and microstructural regulation of the polymer chain unit. Fourthly, typical examples of quaternary ammonium salt polymers in the application fields of water treatment, daily chemicals, petroleum exploitation, papermaking, and textile printing and dyeing were listed. Finally, constructive suggestions were put forward on developing quaternary ammonium salt polymers with high molecular weights, strengthening the research on the relationships between the structures and their properties and pinpointing relevant application fields.     

Density functional theory study on a fluorescent chemosensor device of aza‐crown ether

Three derivatives of alkyl anthracene covalently bonded to aza‐18‐crown‐6 at the nitrogen position, anthracene(CH₂)_n, (n = 1–3) which act as an on–off fluorogenic photoswitch have been theoretically studied using a computational strategy based on density functional theory at B3LYP/6‐31 + G(d,p) method. The fully optimized geometries have been performed with real frequencies which indicate the minima states. The binding energies, enthalpies and Gibbs free energies have been calculated for aza‐18‐crown‐6 ( L ) and their metal complexes. The natural bond orbital analysis is used to explore the interaction of host–guest molecules. The absorption spectra differences between L and their metal ligands, the excitation energies and absorption wavelength for their excited states have been studied by time‐dependent density functional theory with the basis set 6‐31 + G(d,p). These fluorescent sensors and switchers based on photoinduced electron transfer mechanism have been investigated. The PET process from aza‐crown ether to fluorophore can be suppressed or completely blocked by the entry of alkali metal cations into the aza‐crown ether‐based receptor. Such a suppression of the PET process means that fluorescence intensity is enhanced. The binding selectivity studies of the aza‐crown ether part of L indicate that the presence of the alkali metal cations Li⁺, Na⁺ and K⁺ play an important role in determining the internal charge transfer and the fluorescence properties of the complexes. In addition, the solvent effect has been investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

诱导效应指数与脂肪族胺、醇和醚的气相碱性

用烷基诱导效应指数I和RX分子中质子亲合原子X所带电荷qx及元素电负性XN与 脂肪胺，醇、醚的气相质子亲合PA进行关联，结果表明，脂肪胺，醇、醚的气相碱 性可以用下式定量描述：PA(kJ.mol^-1)-2732.0333-2457.1510∑I-1492.2351qx- 732.6277XN利用上式对64种化合物的气相碱性进行预测，平均相对误差为0．34％ ，预测值和实验值的偏差均在实验误差范围内。     

Rubber toughening of poly(ether imide) by modification with poly(butylene terephthalate)

Rubber toughening of poly(ether imide) (PEI) has been elusive up to now due to the high processing temperature of PEI, which leads to degradation of the rubber. In this study, by profiting from the miscibility between PEI and poly(butylene terephthalate) (PBT), and the low T_g of PBT, we prepared a blend by melt extrusion with 20 wt% PBT in an attempt to render it toughenable by decreasing its T_g and processing temperature. The PEI-rich blend was subsequently mixed with maleic anhydride (0.9 wt%) grafted poly(ethylene-octene) copolymer (mPEO) up to 30 wt%. The decrease in T_g and processing temperature resulted in no observable degradation of the mPEO, and to the formation of a homogeneous morphology of rubber particles with a fine particle size, indicating that compatibilization was achieved. Upon rubber addition, stiffness decreased, while a very large toughness increase occurred with only 15% mPEO (impact strength more than 10-fold that of the PEI-PBT matrix). Upon observation of the fracture surface, the increase in impact strength was attributed partially to the cavitation and debonding of the rubber particles, and mostly to the deformation and yielding of the PEI-PBT matrix.     

Synthesis of chiral oxime ethers based on regio- and enantioselective allylic substitution catalyzed by iridium-pybox complex

The oxygen atom of oximes acts as a reactive nucleophile in the iridium-catalyzed allylic substitution of unsymmetrical substrates to give the branched oxime ethers. Among several chiral ligands evaluated, the iridium complex of pybox ligand having phenyl group catalyzed the allylic substitution of phosphates with high activity to form the branched oxime ethers with good enantioselectivities.     

Synthesis and Properties of New-type Troponoid Dithio-Crown Ethers

Troponoiddithio-crownethersareakindofnovelcomPounds.Takeshitaetall-'havereportedthesynthesisandmercurophilicpropertiesofthiskindofcompounds.lnthereportedcomPounds,thetWosulfuratomsareattached,partorall,tothetroponeringdirectly.Whetherthedithio-crownethersstillhaveselectiveandreversiblemercurysaltcaptUringabi1itywhenthetWosulfuratomslinktothebenZylic-mpepositionoftroponeringarousedourinterest.Herein,wewishtoreportthatfromthereactionof3,7-dichloromethyl-5-isopropyl-2-methoxytropone4withbis(mer…     

SYNTHESIS AND CHARACTERIZATION OF POLY(PHTHALAZINONE BIPHENYL ETHER SULFONE KETONE)S FROM 4,4'-DICHLOROBENZOPHENONE

A series of poly(aryl ether sulfone ketone)s containing phthalazinone and biphenyl moieties were synthesized by aromatic nucleophilic displacement polycondensation of 4-(4-hydroxylphenyl)(2H)-phthalazin-1-one(DHPZ),4,4'- dichlorobenzophenone(DCB),4,4'-dichlorodiphenyl sulfone(DCS) and 4,4'-biphenol(BP) in different molar ratios.The obtained copolymers were characterized by different instrumental techniques(FTIR,TGA,DSC,WAXD,etc.).The inherent viscosities of these polymers were in the range of 0.43-0.56 d...     

Synthesis of 2-arylacrylic esters from aryl methyl ketones via Wittig reaction/singlet oxygen ene reaction

An efficient synthetic method has been developed for the synthesis of 2-arylacrylic esters from the corresponding aryl methyl ketones via Wittig reaction and singlet oxygen ene reaction. Wittig reaction to aryl methyl ketones with (methoxymethyl)triphenylphosphonium chloride in basic condition afforded the methyl enol ethers, and then 2-arylacrylic esters were obtained by singlet oxygen ene reaction, followed by tosylation and elimination in one-pot to the methyl enol ethers in good yields.     

含有三氟乙烯基芳基醚侧基的聚丙烯酸酯的合成与表征

研究了聚丙烯酸酯侧基上引入三氟乙烯基芳基醚结构单元的方法. 首先, 合成了含有三氟乙烯基芳基醚侧基的丙烯酸酯单体, 然后通过原子转移自由基聚合实现了该单体的均聚和无规共聚, 得到了含有三氟乙烯基芳基醚侧基的聚丙烯酸酯聚合物, 聚合物的分子量分布较窄. 通过控制共聚投料比, 可以得到具有不同含量三氟乙烯基芳基醚侧基的无规共聚物.