冠醚共缩聚物的合成与性能（Ⅱ）

采用２，６－二羟甲基苯酚类化合物分别与单苯并冠醚（Ｂ１５ＣＳ、Ｂ１８Ｃ６）和Ｍ苯并冠醚（２Ｂ１８Ｃ６、２Ｂ２４Ｃ８、２Ｂ３０Ｃ１０）在酸催化下缩聚，合成了两个系列冠醚共缩聚物．这些聚合物Ｍ＝１２００—４５００，可溶于氯仿等溶剂，萃取性能和络合选择性均有所提高．作为树脂使用，动态吸附容量为０．０５—０．１５ｍｍｏｌ／ｇ，并有较好的色谱特性．     

Studies on Heteromacrocyclic Polyether（X） Synthesis and Structural Characterization of 2，3，11，12－Dibenzo－1，4，10，13－tetraselena－7，16－dioxacyclooctadeca－2，11－diene

ＳｔｕｄｉｅｓｏｎＨｅｔｅｒｏｍａｃｒｏｃｙｃｌｉｃＰｏｌｙｅｔｈｅｒ（Ｘ）ＳｙｎｔｈｅｓｉｓａｎｄＳｔｒｕｃｔｕｒａｌＣｈａｒａｃｔｅｒｉｚａｔｉｏｎｏｆ２，３，１１，１２－Ｄｉｂｅｎｚｏ－１，４，１０，１３－ｔｅｔｒａｓｅｌｅｎａ－７，１６－ｄｉ...     

含氰基侧基聚芳醚砜的合成与表征

汉２，６－二卤苯甲腈、４，４′－二氯二苯砜、４，４′－二羟基二苯砜、间苯二酚、对苯二酚、酚酞及双酚Ａ为主要原料，合成了含不同结构单元和不同氰基含量的含氰基侧基的聚芳醚砜，并采用ＩＲ、＾１３ＣＮＭＲ等分析手段对其结构进行了表征，同时研究了结构单元和氰基含量对聚芳醚砜性能的影响。     

双冠醚研究(Ⅳ)——Schiff碱型和仲胺型双-(苯并15冠-5)对碱金属苦味酸盐的萃取行为

仲胺型双冠醚与四苯硼酸碱金属盐在丙酮溶液中。25℃下的电导说明它们与Na~+可能形成1∶1络合物(冠醚单元∶金属离子),而与K~+、Rb~+、Cs~+离子则形成2∶1络合物。用Schlff碱型和仲胺型双-(苯并15-冠-5)在水-氯仿体系中进行萃取,测量了分配比D和萃取平衡常数K,发现后者的K值均大于前者。双冠醚F_2对K~+的萃取能力最强,选择性最佳。     

Mn(15-冠-5)(NCS)_2的晶体和分子结构

在碱金属离子或碱土金属离子与过渡金属离子共存的情况下，全氧冠醚一般选择前者与之配位［1，2］，而与过渡金属离子直接配位的情况则报道较少［3，4］我们在Na+与Mn2+共存的体系中制得了标题配合物的单晶体，并用四圆衍射仪测定了其晶体结构和分子结构．本文对进一步探讨全氧冠醚与过渡金属离子的配位性能及配位特点具有重要的意义．1实验部分1．1单晶生长在10mL称量瓶中，加入0．5gMnCI。·4H。0、08gNaSCN和5mL蒸馏水，溶解后再加入0．ig15一冠一5，搅拌均匀，静置于有机玻璃恒温箱中（25士0．SC），6h后长出无色棒状单晶．经红外…     

冠醚B15C5萃取分离锂同位素的阴离子效应

本文研究了B15C5冠醚萃取锂盐时,不同阴离子对体系的同位素分离效应的影响。结果表明,阴离子在冠醚萃取过程中不仅对萃取络合物的稳定性有显著影响,而且阴离子半径及软度越大时,萃取体系的锂同位素分离系数(α_(LI))也越大。     

One-pot synthesis of N-protected α-amino aldehyde acetals from three-component reaction of fluoroalkanesulfonyl azide, vinyl ether and alcohol

A facile one-step method has been developed for the synthesis of N-protected α-amino aldehyde acetals in moderate to good yields by three-component reaction of fluoroalkanesulfonyl azides, vinyl ethers and alcohol at 0 °C within 10 min. This practical synthetic method provides a convenient and expeditious access to N-per(poly)fluoroalkanesulfonyl α-amino aldehyde acetals.     

New stage in living cationic polymerization: An array of effective Lewis acid catalysts and fast living polymerization in seconds

Our recent extensive research on Lewis acid catalysts with a weak base for the cationic polymerization of vinyl ethers led to unprecedented living reaction systems: fast living polymerization within 1–3 s; a wide choice of metal halides containing Al, Sn, Fe, Ti, Zr, Hf, Zn, Ga, In, Si, Ge, and Bi; and heterogeneously catalyzed living polymerization with Fe₂O₃. The use of added bases for the stabilization of the propagating carbocation and the appropriate selection of Lewis acid catalysts were crucial to the success of such new types of living polymerizations. In addition, the base‐stabilized living polymerization allowed the quantitative synthesis of star‐shaped polymers with a narrow molecular weight distribution via polymer‐linking reactions and the precision synthesis and self‐assembly of stimuli‐responsive block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1801–1813, 2007.     

芳醚树枝形聚合物的合成及分子内光敏异构化反应研究

利用收敛法合成了一代到四代外围带有二苯酮、核心带有降冰片二烯的芳醚树枝形聚合物, 初步研究了这些化合物的分子内光敏异构化反应. 以波长大于350 nm的光选择激发外围的二苯酮官能团引起核心处降冰片二烯基团异构化为四环烷, 随着代数的增长, 光敏异构化反应的速率逐渐加快.     

Density and Speed of Sound for Binary Mixtures of a Cyclic Ether with a Butanol Isomer

Densities and speeds of sound of the binary mixtures 1,3-dioxolane + 1-butanol, 1,3-dioxolane + 2-butanol, 1,4-dioxane + 1-butanol, and 1,4-dioxane + 2-butanol have been measured at 25 and 40°C. The excess molar volumes and excess isentropic compressibility coefficients were calculated from experimental data and fitted to a Redlich–Kister polynomial function. Results were analyzed in terms of molecular interactions and compared with literature data.