Reversed-phase retention thermodynamics of pure-water mobile phases at ambient and elevated temperature

The use of pure water at superheated temperatures, between 100 and 200 degrees C, as a mobile phase for reversed-phase separations is explored. The thermodynamics of the retention process at low temperature (15-55 degrees C) are compared to the thermodynamics at elevated temperature (125-175 degrees C). Significant differences in the enthalpy of the retention process are observed between the two temperature ranges. This is possibly due to changes in the hydrogen-bond network of the pure-water mobile phase, which would change the solvation, and therefore retention, of non-polar solutes. The change in thermodynamic values between the two temperature regions invalidates extrapolation of retention as a function of temperature between the two temperature regions for the prediction of room-temperature pure-water retention factors. The thermodynamic changes observed as the temperature is increased are similar to those seen when mobile phase composition is changed (by adding organic modifier) at constant temperature.     

Thermal Immobilization of Poly(Butylacrylate) on Glass-Ceramic Rod for Preparation of Solid Phase Microextraction Fibers

The efficiency of a glass-ceramic rod as a base for the preparation of SPME fibers using thermal immobilization was investigated. Glass-ceramic and fused silica rods were thermally immobilized with poly(butylacrylate) and their absorption capacity was compared. The absorption capacity between the fiber obtained for thermal immobilization of poly(butylacrylate) on glass-ceramic surface and commercially PA fiber was also compared. In this study the target analytes were phthalate esters and phenols. The results obtained for extraction of phenols from aqueous solutions using the headspace mode demonstrated the superiority of glass-ceramic in relation the silica gel rod as a base for SPME fiber. The direct SPME extraction of phthalate esters from aqueous solutions using commercial PA fiber and that obtained for thermal immobilization of poly(butylacrylate) on glass-ceramic rod presented similar results. The repeatability and the reproducibility among extractions using fibers developed in our laboratory were achieved.     

邻苯二甲酸异丙酯酰氧基-丙烯酰氧基-乙酰乙酸乙酯络铝及其聚合物的合成与荧光性质

通过异丙氧基铝和邻苯二甲酸酐、乙酰乙酸乙酯及丙烯酸反应,合成了螯合物单体邻苯二甲酸异丙酯酰氧基-丙烯酰氧基-乙酰乙酸乙酯络铝,由自由基聚合法合成了聚合物,用元素分析仪、VPO、IR、¹HNMR和²⁷AlNMR证实了它们的结构,并研究了它们在DMF中的荧光性质。     

双亲性邻苯二甲酸正十八醇单酯稀土配合物的合成、发光、能量传递及成膜性能

自从ＶｏｎＨａｎｓＫｕｈｎ［１］首次发表了关于稀土配合物ＬＢ膜的研究以来,随着材料科学的不断发展,功能稀土配合物ＬＢ膜以其在导电［２,３］、非线性光学［４,５］、磁学［６,７］和光学［８,９］等领域中的优异性能愈来愈引起人们的注意,并取得了可喜的进展...     

Volatilisation,Evaporation and Vapour Pressure Studies Using a Thermobalance

There is considerable interest in performing volatilisation and evaporation measurements by thermogravimetry. A quick and simple method for determining vapour pressure using a conventional thermobalance and standard sample holders has been developed. These yield meaningful thermodynamic parameters such as the enthalpies of sublimation and vaporisation. Under favourable conditions the melting temperature and enthalpy of fusion of such compounds can be obtained. This technique has been used for the study of dyes, UV absorbers and plasticisers. The use of modulated- temperature programs for such work is also described. This revised version was published online in July 2006 with corrections to the Cover Date.     

多功能离子液体分散液液微萃取结合高效液相色谱法检测人尿中5种邻苯二甲酸酯代谢物

将多功能离子液体与分散液液微萃取（DLLME）技术相结合，建立了测定尿液中5种邻苯二甲酸酯类（PAEs）物质代谢产物的高灵敏度新方法。对影响DLLME效率的各单因素进行了优化，包括萃取剂的种类及体积、分散剂的种类及体积、萃取温度、超声时间、冷却时间、离心时间和盐效应等条件，经过严格的优化，最佳的萃取条件分别为：萃取剂[C₈MIM]PF₆]35 μL，分散剂[BSO₃HMIm]OTf]30 μL和[C₄MIM]BF₆]120 μL，萃取温度为35℃，超声时间5 min，冷却时间5 min，离心时间5 min，盐析剂NH₄PF₆ 0.1 g。在最佳的萃取条件下，5种PAEs代谢物在0.5~1000 μg/L范围内具有良好的线性关系，决定系数（R²）均大于0.9955，方法检出限为0.16~0.19 μg/L，尿液中添加低中高水平（5、20、100 μg/L）的PAEs代谢物，其回收率为92.9%~105.0%，日内精密度及日间精密度的相对标准偏差（RSD）均小于5.96%，方法学验证各指标及稳定性均符合分析要求。对所采集的10份糖尿病患者的尿液进行检测，并对该人群PAEs代谢物的暴露水平进行评价。结果表明，各PAEs代谢物均有检出，其中邻苯二甲酸单（2-乙基己基）酯（MEHP）的检出率为100%。总之，该方法萃取过程中未添加有毒的有机试剂，均使用多功能离子液体作为萃取剂、分散剂和盐析剂，萃取过程绿色环保，简单高效；方法的灵敏度较高，稳定性较好，适用于人体尿液中痕量PAEs代谢物的检测。     

污水中6种邻苯二甲酸酯的测定

采用同时蒸馏萃取法提取水样中的邻苯二甲酸二甲酯、邻苯二甲酸二乙酯、邻苯二甲酸二丁酯、邻苯二甲酸丁基苄基酯、邻苯二甲酸二正辛酯、邻苯二甲酸二(2-乙基己基)酯6种邻苯二甲酸酯,用GC-MS进行定性和定量分析.对pH值、盐度和提取时间等影响因素进行优化.当pH值为2.0,NaCl加入量为5.0 g/L和提取时间为2.5 h时,目标化合物具有较好的回收率.优化条件下6种邻苯二甲酸酯的样品加标回收率为98%～105%,相对标准偏差为1.8%～5.6%,方法检出限为8.0～200.0 ng/L.方法成功应用于城市污水中该类化合物的监测.     

固相微萃取-气相色谱法测定白洋淀水样中的邻苯二甲酸酯类化合物

建立了固相微萃取(SPME)-气相色谱法(GC)分析环境水样中痕量邻苯二甲酸酯类化合物(PAEs)的方法。选用100 μm聚二甲基硅烷(PDMS)萃取纤维,在磁力搅拌条件下,对水样中的PAEs萃取富集60 min,然后直接注入GC进样口,在250 ℃温度下解吸4 min后进行分析测定,13种PAEs能得到充分提取和分离。方法的重现性(以相对标准偏差(RSD)计为0.2%～9.7%,检出限为0.02～0.83 μg/L。将本方法应用于白洋淀水样中PAEs的分析检测发现,样品中邻苯二甲酸二异丁酯(DIBP)、邻苯二甲酸二丁酯(DBP)、邻苯二甲酸二(2-乙基己基)酯(DEHP)检出率相对较高。对水样进行两个浓度水平(2.5 μg/L和5.0 μg/L)的加标试验,加标回收率为75.3%～111.0%,RSD为2.1%～8.0%(n=3),能够满足环境水样中痕量PAEs的测定要求。     

Selective solid-phase extraction of dibutyl phthalate from soybean milk using molecular imprinted polymers

An analysis method is reported for dibutyl phthalate and related compounds with high selectivity and sensitivity by using the selective molecularly imprinted solid-phase extraction (MISPE) technique. In this report, dibutyl phthalate (DBP) is employed as the template molecule, and the molecularly imprinted polymers (MIPs) are synthesized through the bulk polymerization of methacrylic acid (MAA). The Scatchard plot suggests that the template-polymer system has two-site binding behavior with the dissociation constants of 0.5187 and 0.01898 mmol L⁻¹, respectively. The rebinding test, based on the MISPE column technique, shows the recoveries of soybean milk samples spiked with 5 phthalates are in the range of 75.8-107.5% with the relative standard deviations of 1.80-10.08%, indicating the feasibility of the prepared MIPs for phthalates extraction. Finally, the method is used to analyze the trace level of phthalates in commercial soybean milk.     

气相色谱-质谱联用测定食品中的邻苯二甲酸酯

建立了食品中15种邻苯二甲酸酯类增塑剂的超声提取-固相萃取净化/GC-MS分析方法。考察了不同类食品的提取、净化方法,对检测的色谱条件进行优化,并通过基质加标校准曲线补偿邻苯二甲酸酯的基体效应。研究表明,净化后食品萃取液的基质去除率达到80%;15种邻苯二甲酸酯的方法线性范围为1～800μg/kg,相关系数大于0.998;加标样品的平均回收率为84%～115%,RSD(n=6)为5.3%～9.4%。含油脂食品的检出限为0.50～3.20μg/kg;不含油脂食品和液体食品的检出限为0.02～0.50μg/kg。该方法前处理过程简单、溶剂用量小、净化效果好,可用于不同种类食品中15种邻苯二甲酸酯类增塑剂的测定。