Optimisation of a flow injection system with electrochemical detection using the desirability function: Application to the determination of hydroquinone in cosmetics

A procedure is proposed in which the determination of hydroquinone using a flow injection system with electrochemical detection is described. Size and coefficient of variation of the signal are optimised by a desirability function and a central composite design. The robustness of the optimum reached in the optimisation step is evaluated by means a Plackett-Burman design. The optimised FIA system is able to determine hydroquinone with a minimum detectable net concentration of 10 μg l⁻¹ with a false positive probability of 0.05 and a false negative probability less than 0.05. In samples of bleaching cream, the proposed procedure has a recovery of 102.2% with standard deviation of 4.4% and a relative error of 6.2%.     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

标准气体在检测可燃气体报警器中的重要性

介绍可燃气体报警器的检测现状，分析可燃气体报警器检测元件中毒的原因，强调了检测可燃气体报警器时使用标准气体的重要性，以及标准气体的正确使用。     

Limit of detection estimator for second-order bilinear calibration

A new approach is developed for estimating the limit of detection in second-order bilinear calibration with the generalized rank annihilation method (GRAM). The proposed estimator is based on recently derived expressions for prediction variance and bias. It follows the latest IUPAC recommendations in the sense that it concisely accounts for the probabilities of committing both types I and II errors, i.e. false positive and false negative declarations, respectively. The estimator has been extensively validated with simulated data, yielding promising results.     

Optimization and development of a high-performance liquid chromatography-based one-site immunometric assay with chemiluminescence detection

Various practical and theoretical considerations were examined in the creation and optimization of a high-performance liquid chromatography (HPLC)-based one-site immunometric assay. This method used an HPLC analyte analog column and post-column chemiluminescence detection. The specific analyte chosen as the model for this study was l-thyroxine (also known as T₄). In this technique, a sample containing thyroxine was first combined with an excess of anti-T₄ antibody Fab fragments that had earlier been conjugated with chemiluminescent acridinium ester labels. After incubation, the mixture was injected onto a column that contained immobilized T₄. The amount of thyroxine in the original sample was then determined by measuring the labeled Fab fragments that appeared in the non-retained fraction, or the decrease in excess Fab fragments that were bound to and later eluted from the column. Items considered in creating this assay included the preparation of acridinium ester-labeled Fab fragments, the detection of these fragments with a post-column reactor, and the creation of a suitable immobilized analog column for capturing excess labeled Fab fragments. The final method could measure T₄ in standards at clinically-relevant concentrations and provided a response within 1.5 min of sample injection, following a 20-45 min incubation with the labeled Fab fragments. Possible applications of this method include its use in clinical chemistry and the screening of proteomic or combinatorial libraries.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

Immunological detection of glycoproteins on blots based on labeling with digoxigenin

In the following, we describe the application of the DIG/antiDIG system for the (structural) analysis of glycoproteins on blots. Special emphasis is being placed on the variety of the different DIG applications in order to obtain structural information concerning the glycoprotein carbohydrate chains. Prominent among them is the use of lectins with well-known specificities for carbohydrate structures. This article first appeared in: Hounsell, E. F., ed. (1993),Methods in Molecular Biollogy, vol. 14: Glycoprotein Analysis in Biomedicine, Humana Press Inc., Totowa, NJ.     

Individual determination of ortho and non-ortho substituted polychlorobiphenyls (PCBs) in sediments by high performance liquid chromatographic pre-separation and gas chromatography/ECD detection

Summary An analytical procedure for the individual determination of ortho and non-ortho PCB congeners in sediments, using high performance liquid chromatography (HPLC) preseparation and gas chromatography/ECD detection, is described. Gas chromatography/FTIR spectrometry (GC/FTIR) and gas chromatography/mass spectrometry (GC/MS) were employed for individual congener identification and determination. Sample extraction, clean-up of extract and selective elution procedures were optimized by using reference certified marine sediment samples. Recovery and precision were typically 83% and 16% respectively at 2 ng/g of total PCB content. The proposed procedure, tested by analyzing real sediment samples, showed a reproducibility better than 20% at 13 ng/g PCB level.     

Migration of Ethylene Terephthalate Oligomers from Roasting Bags into Olive Oil

Summary A high-performance liquid-chromatographic method with UV detection (HPLC–UV) has been developed for quantification of ethylene terephthalate oligomers in olive oil, from which they were extracted with acetonitrile. Oligomers, from monomers (M₁) to pentamers (M₅), were jointly and/or individually identified by liquid chromatography with mass spectrometry (electron-impact mass spectrometry (EIMS) low- and high-resolution) and were quantified by HPLC–UV using an acetonitrile solution of the major oligomer (the trimer M₃) as standard. For M₃ recovery was 98.9%, the detection limit was 60 g L^–2, and method precision was 2.03% (RSD). Migration of oligomers M₁–M₅ into 50 mL olive oil sealed in each of two brands of 10 cm × 10 cm poly(ethylene terephthalate) roasting bag was evaluated under two sets of conditions that approached but remained below the limit at which the bag material became physically deformed – heating for 7 min at 850 W in a microwave oven, or for 60 min at 200 °C in a conventional oven. Total migration was approximately 2.7 mg dm^–2 under the former conditions and 3.5–4.1 mg dm^–2 under the latter.Presented at the International Symposium on Separation and Characteristics of Natural and Synthetic Macromolecules, Amsterdam, The Netherlands, February 5–7, 2003     

无机阴离子的毛细管电泳分析

本文研究了常见无机阴离子的毛细管电泳规律，考察了分离电压、电解质熔液组成、浓度、ｐＨ值等对分离的影响，建立了高效、快速的无机阴离子毛细管电泳分析方法。在选定的实验条件下，各种常见无机阴离子在５ｍｉｎ内达到完全分离，对Ｂｒ＾－和Ｃｌ＾－的分离柱效每米可达７６万理论板数。迁移时间的相对标准偏差小于１％，峰面积的相对标准偏差小于５％，各离子的最低检测浓度为０．０５￣０．５μｇ／ｍｌ。