Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel

The present work discusses the effect of the pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel. Cavitation erosion of three different types of the pearlitic steels (furnace-cooled, air-cooled, and forced-air-cooled) consisting of coarse, fine, and very fine microstructures were tested in 3.5% NaCl solution and compared with that of the as-received pearlitic rail steel. The variation in the mean depth of erosion (MDE) and mean depth erosion rate (MDER) with erosion time was analyzed. Furthermore, the cavitation erosion resistance of the as-received, the air-cooled, and the forced-air-cooled was found to be 1.03, 1.51, and 2.14 times better than the furnace-cooled pearlitic steel, respectively. It was concluded that the cavitation erosion resistance of the pearlitic steel increased with the increase in the fineness of the microstructure.     

How to Construct Polar Codes for Ring-LWE-Based Public Key Encryption

There exists a natural trade-off in public key encryption (PKE) schemes based on ring learning with errors (RLWE), namely: we would like a wider error distribution to increase the security, but it comes at the cost of an increased decryption failure rate (DFR). A straightforward solution to this problem is the error-correcting code, which is commonly used in communication systems and already appears in some RLWE-based proposals. However, applying error-correcting codes to those cryptographic schemes is far from simply installing an add-on. Firstly, the residue error term derived by decryption has correlated coefficients, whereas most prevalent error-correcting codes with remarkable error tolerance assume the channel noise to be independent and memoryless. This explains why only simple error-correcting methods are used in existing RLWE-based PKE schemes. Secondly, the residue error term has correlated coefficients leaving accurate DFR estimation challenging even for uncoded plaintext. It can be found in the literature that a tighter DFR estimation can effectively create a DFR margin. Thirdly, most error-correcting codes are not well designed for safety considerations, e.g., syndrome decoding has a nonconstant time nature. A code good at error correcting might be weak under a variety of attacks. In this work, we propose a polar coding scheme for RLWE-based PKE. A relaxed “independence” assumption is used to derive an uncorrelated residue noise term, and a wireless communication strategy, outage, is used to construct polar codes. Furthermore, some knowledge about the residue noise is exploited to improve the decoding performance. With the parameterization of NewHope Round 2, the proposed scheme creates a considerable DRF margin, which gives a competitive security improvement compared to state-of-the-art benchmarks. Specifically, the security is improved by 28.8%, while a DFR of 2−149 is achieved a for code rate pf 0.25, n=1024,q= 12,289, and binomial parameter k=55. Moreover, polar encoding and decoding have a quasilinear complexity O(Nlog2N) and intrinsically support constant-time implementations.     

Reference-frame-independent quantum key distribution of wavelength division multiplexing with multiple quantum channels

Reference-frame-independent quantum key distribution (RFI-QKD) can allow a quantum key distribution system to obtain the ideal key rate and transmission distance without reference system calibration, which has attracted much attention. Here, we propose an RFI-QKD protocol based on wavelength division multiplexing (WDM) considering finite-key analysis and crosstalk. The finite-key bound for RFI-QKD with decoy states is derived under the crosstalk of WDM. The resulting secret key rate of RFI-QKD, which is more rigorous, is obtained. Simulation results reveal that the secret key rate of RFI-QKD based on WDM is affected by the multiplexing channel number, as well as crosstalk between adjacent channels.     

HL-2M装置真空室预装阶段检漏试验

通过在加工现场和安装现场搭建的真空辅助系统、四极质谱计及氦检漏仪组成的检漏系统,运用残余气体分析和氦质谱检漏方法在冷态下对HL-2M真空室扇形段及真空室整体进行了真空检漏试验.对漏点进行修复后,测试了真空室的极限真空度和总漏气率等.真空室经过72h的抽气后,真空度达到3.7×10?5Pa,超过了1.0×10?4Pa的预...     

The lowest electronic states of Ne2 +, Ar2 + and Kr2 +: comparison of theory and experiment

Non-relativistic configuration interaction (CI) ab initio calculations using large basis sets have been carried out to determine the potential curves of the first electronic states of Ne₂ ⁺, Ar₂ ⁺ and Kr₂ ⁺. The spin—orbit interaction was treated assuming that the spin—orbit coupling constant is independent of the internuclear separation (R). For Ar₂ ⁺, calculated dissociation energies and equilibrium separations are in good agreement with experimental results. The calculations for Ne₂ ⁺ suggest that the lowest vibrational level of the I(1/2u) ground state observed by threshold photoelectron spectroscopy by Hall et al. [1995, J. Phys. B: At. molec. opt. Phys., 28, 2435] and assigned to either ν = 0 or ν = 2 actually corresponds to ν = 4. The calculations also predict the I(1/2g) state of Ne₂ ⁺ and Ar₂ ⁺ to possess a double-well potential and that of Kr₂ ⁺ to be repulsive at short range and to only possess a single shallow well at large internuclear separation. The ab initio calculations provide an explanation for the observation made by Yoshii et al. [2002, J. chem. Phys., 117, 1517] that Kr₂ ⁺ and Xe₂ ⁺ dissociate after photoemission from the II(1/2u) state to the I(1/2g) state whereas Ar₂ ⁺ does not.     

Two-photon annihilation rate of the positronic HCN molecule

Positron binding by the HCN molecule was studied within a modified adiabatic approximation. This approach, in which the positron is treated as a light pseudonucleus with fractional charge, leads to the binding energy of 0.65?mHartree. Using effective positron mass which reproduces the Quantum Monte Carlo binding energy gives an estimation of the two-photon annihilation rate of e ⁺HCN, equal to 0.091?ns^?1.     

Time-series analysis of foreign exchange rates using time-dependent pattern entropy

Time-dependent pattern entropy is a method that reduces variations to binary symbolic dynamics and considers the pattern of symbols in a sliding temporal window. We use this method to analyze the instability of daily variations in foreign exchange rates, in particular, the dollar–yen rate. The time-dependent pattern entropy of the dollar–yen rate was found to be high in the following periods: before and after the turning points of the yen from strong to weak or from weak to strong, and the period after the Lehman shock.     

Hydrophobic Bimetallic Catalysts for H/D Exchange Reaction between Hydrogen and Water

Hydrophobic bimetallic catalysts of Pt-M on styrenedivinylbenzene were prepared, where M represents successively: Ir, Rh, Pd, Cu and Ag. The total metal loading was 0.5 wt% and the weight fractions of the metal M were: 0.0,0.05,0.1,0.25,0.5,0.75 and 1.0. For each sample, the catalytic activity for H/D exchange between hydrogen and water vapor was measured. In case of monometallic catalysts, no activity was detected for M = Cu and M = Ag, and the order of the activity values for the other metals was: Pt < Ir < Rh < Pd. For each bimetallic catalyst, the activity measurements indicated a clear interaction between the platinum and the second metal, thus the activity was significantly increased for M = Ir, increased for M = Rh, decreased for M = Pd, drastically decreased for M = Cu and M = Ag.     

Evaluation of the mechanical properties of PMC interface using slice compression test — Analysis of transfer mechanism of interfacial shear stress

Properties of the fiber/matrix interface in SiO₂/epoxy and SiC/epoxy composite are investigated using the slice compression test (SCT) for the single fiber, where the specimen is loaded and unloaded between a plate which has different mechanical properties. It is found that the interfacial debonding proceeds from the polished surface at a soft plate side and that the fiber protrusion occurs after unloading. The fiber-protrusion length is directly measured at each applied stress level using a scanning electron microscope. Interfacial shear-sliding stress is obtained based on the constant shear-sliding stress analysis employing the obtained protrusion length. It is demonstrated that the value of interfacial shear-sliding stress shows good agreement with that obtained from another technique, the push-out test, on the same system. The relation between the fiber-protrusion length and applied stress is proportional to a certain extent. From this result, it is analytically pointed out that the applied stress has a limiting value in this SCT because of Poisson's effect. Also, two interfacial debonding criteria, which are determined analytically for the PMC, are discussed.     

Influence of gamma radiation on morphology structure,electrochemical corrosion behavior and hardness of Ni–Cr based alloys

This study evaluates the effects of gamma radiation on structure, electrochemical corrosion behavior and Vickers hardness of commercial dental Nikkeli–Kromi–Polttosekoitus [Ni_65.2Cr_22.5Mo_9.5X_2.8 (X=Nb, Si, Fe and Mn)] alloy. The corrosion rate of Ni_65.2Cr_22.5Mo_9.5X_2.8 (X=Nb, Si, Fe and Mn) alloy with 0.5 M HCl is increased with increasing the exposure rate of gamma radiation. The corrosion resistance of Ni_65.2Cr_22.5Mo_9.5X_2.8 (X=Nb, Si, Fe and Mn) is varied and reaches a minimum value at 30 KGy. The corrosion potential value also is varied and reaches its highest value at 30 KGy. The Vickers hardness value of Ni_65.2Cr_22.5Mo_9.5X_2.8 (X=Nb, Si, Fe and Mn) alloy is decreased by increasing the gamma radiation dose. Also it is obvious from our results that the effects of gamma radiation at the surface are much higher as compared with deeper parts and the structure of the alloy is changed due to its exposure to gamma radiation.