Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Determination of some monoazo compounds by derivative pulse polarography

Summary The determination of some monoazo compounds by derivative pulse polarography has been investigated. The effect of pH is studied, and the optimum pH was determined to give the highest sensitivity. The detection limit is ca. 1×10^–5 M. Response is linear up to 8×10^–4 M.

---

Bestimmung einiger Monoazoverbindungen durch derivative Pulspolarographie

Zusammenfassung Die Bestimmungsmöglichkeiten für einige Monoazoverbindungen durch derivative Pulspolarographie wurden untersucht. Der Einfluß des pH-Wertes wurde getestet und der jeweils optimale Wert in Abhängigkeit von den Substituenten ermittelt. Die Nachweisgrenze liegt bei 1×10^–5 M. Die Anzeige ist linear bis 8×10^–4 M.

     

Crystal and molecular structure of 6-0-acetylgrayanotoxin III

The crystal and molecular structure of a grayanotoxin III derivative, 6-0-acetylgrayanotoxin III is presented. The crystal is orthorhombic, space group P2₁2₁2₁, witha=15.582(3),b=21.304(3),c=6.339(3)Å,V=2104(1) ų Z=4. The structure was solved by direct methods and refined by full matrix least-squares methods to a finalR=0.047 for 1763 independent reflections withF ₀>3 (F ₀) The molecule is based on a tetracyclic structure consisting of two five-membered, one six-membered, and one seven-membered ring with various conformations.     

Studies of surface properties of Na- and La-montmorillonites

This paper presents possible applications of thermal analysis, sorptometry and porosimetry to study physico-chemical properties of Na- and La-montmorillonite samples, especially for determination of total surface heterogeneity. The quasi-isothermal thermogravimetric (Q-TG) mass loss and its first derivative (Q-DTG) curves with respect to temperature and time obtained during programmed liquid thermodesorption under quasi-isothermal conditions have been used to study adsorbed layers and heterogeneous properties of the Na- and La-montmorillonites. Calculations of the desorption energy distribution functions by analytical procedure using mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption under quasi-isothermal conditions of polar and non-polar liquid vapours preadsorbed on a material surface are presented. Parameters relating to porosity of samples were determined by sorptometry, mercury porosimetry and atomic force microscopy (AFM). From nitrogen sorption isotherms from sorptometry and porosimetry methods, the fractal dimensions of montmorillonites have been calculated. Moreover, a new approach is proposed to calculate fractal dimensions of materials obtained from Q-TG curve; this is compared with values obtained by the above methods. The total heterogeneous properties (energy distribution function and pore-size distribution functions) of samples studied were estimated. The radius and pore volume of the tested samples calculated on the basis of thermogravimetry, sorptometry and porosimetry techniques were compared and good correlations obtained.     

Pyrolysis Analysis and Kinetics of Crude Oils

This research presents the results of an experimental study on the determination of pyrolysis behaviour and kinetics of six crude oils by differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG). Crude oil pyrolysis indicated two main temperature ranges where loss of mass was observed. The first region between ambient to 400°C was distillation. The second region between 400 and 600°C was visbreaking and thermal cracking. Arrhenius-type kinetic model is used to determine the kinetic parameters of crude oils studied. It was observed that as crude oils gets heavier (°API decreases) cracking activation energy increases. Activation energy of cracking also show a general trend with asphaltene content. This revised version was published online in July 2006 with corrections to the Cover Date.     

Kinetic analysis of thermogravimetric data

Four many curves methods, viz. calculation techniques based on Eqs (30), (31), (34) and (36), respectively, for deriving kinetic parameters from several TG curves recorded with different heating rates are tested on two sets of theoretical TG curves. The maximum reaction rate temperature and conversion, as well as the approximate formulae used for their calculation are discussed. Some aspects of the kinetic compensation effect are analysed. The final conclusion is that the use of the many curves methods is not reasonable.     

Ligand creation via linking—a rapid and convenient method for construction of novel supported PyOX-ligands

A novel supported amino alcohol linker was synthesized and utilized for attachment of picolinic acid derivatives onto different supports. When the resin bound molecule was further activated, the PyOX-moiety could be constructed reliably in enantiopure form. Furthermore, an efficient Pd-catalyzed modification of a picolinic acid derivative is presented.     

In Vitro and In Vivo Antibacterial Activity,Toxicity and Resistance Analysis of Pleuromutilin Derivative Z33 against Methicillin-Resistant Staphylococcus aureus

The novel pleuromutilin derivative, which showed excellent in vitro antibacterial activity against MRSA, 22-(2-(2-(4-((4-(4-nitrophenyl)piperazin-1-yl)methyl)-1H-1,2,3-triazol-1-yl)acetamido)phenyl)thioacety-l-yl-22-deoxypleuromutilin (Z33), was synthesized and characterized in our previous work. In this study, the preliminary pharmacodynamics and safety of Z33 were further evaluated. In in vitro antibacterial activity assays, Z33 was found to be a potent bactericidal antibiotic against MRSA that induced dose-dependent growth inhibition and long-term post-antibiotic effect (PAE). The drug-resistance test demonstrated that Z33 possessed a narrow mutant selection window and lower propensities to select resistance than that of tiamulin. Cytochrome P450 (CYP450) inhibition assay determined that the inhibitory effect of Z33 was similar to that of tiamulin against the activity of CYP3A4, and was lower than that of tiamulin on the activity of CYP2E1. Toxicity determination showed that both Z33 and tiamulin displayed low cytotoxicity of RAW264.7 cells. Furthermore, Z33 was found to be a high-security compound with a 50% lethal dose (LD₅₀) above 5000 mg/kg in the acute oral toxicity test in mice. In an in vivo antibacterial activity test, Z33 displayed better therapeutic effectiveness than tiamulin in the neutropenic mouse thigh infection model. In summary, Z33 was worthy of further development as a highly effective and safe antibiotic agent against MRSA infection.     

Effect of solvent on the construction of Co(II) coordination polymers containing a semi-rigid bis(benzimidazole) derivative: syntheses,structures, and properties

Two Co(II) coordination polymers, [CoL(npa)]·2H₂O (1) and [CoL(Hnpa)₂] (2) (L = 1,4-bis(5,6-dimethylbenzimidazole-1-yl)benzene, H₂npa = 5-nitroisophthalic acid), have been synthesized in different solvent systems and characterized by Infrared (IR) spectroscopy, elemental analysis, and powder and single crystal X-ray diffraction. Compound 1 was synthesized under solvothermal conditions with DMF as solvent and had a pair of L ligands adopting a μ₂-bridging mode and connecting two Co²⁺ cations to generate a 26-membered Co₂L₂ loop. The npa^2? link adjacent Co₂L₂ loops via a bis(monodentate) bridging mode to create a 1-D channel-like chain structure. Compound 2 was obtained under hydrothermal conditions, and the carboxylate of the monodeprotonated Hnpa^? adopt a μ₁-η^0?:?η¹ coordination to connect adjacent Co²⁺ cations into a 2-D polymeric layer. The μ₂-bridging L ligands connect adjacent 2-D [Co(Hnpa)]_n polymeric layers into a 3-D NaCl-like framework. The Co²⁺ cations and the L ligands in compounds 1 and 2 exhibit different coordination geometries and conformations. Effects of solvents on the construction of Co(II) coordination polymers were investigated. In addition, the electrochemical behavior of carbon paste electrodes containing 1 and 2 and the thermal stabilities of 1 and 2 were investigated.     

诺氟沙星的荧光光谱研究及其应用

采用荧光光谱法研究了诺氟沙星在不同pH条件下的光谱行为,发现诺氟沙星在pH 3.04的水溶液中具有较强的荧光发射,与中性介质相比荧光发射光谱红移了30 nm。据此分别建立了药物制剂中和人体尿液中诺氟沙星的荧光光谱法和同步-导数荧光光谱法。经样品测定,其线性范围为0.016～0.96 μg·mL-1,检出限为0.016 μg·mL-1, 回收率为99.7%～100.94%, 相对标准偏差为1.65%～2.86%。