Comparison between self-reinforced composites based on ultra-high molecular weight polyethylene fibers and isotropic UHMWPE

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

PERFORMANCE IMPROVEMENT OF POLYMERS BY THE ADDITION OF GRAFTED NANO-INORGANIC PARTICLES

An irradiation grafting method was applied for the modification of nanoparticles so that the latter can be added topolymeric materials for improving their mechanical performance using existing compounding techniques. The followingitems are discussed in this paper: (a) chemical interaction between the grafting monomers and the nanoparticles duringirradiation, (b) properties including modulus, yield strength, impact strength and fracture toughness of the resultantcomposites, and (c) possible morphological changes induced by the addition of nanoparticles. Though irradiation graftingpolymerization, nanoparticle agglomerates turn into a nano-composite microstructure (comprised of the nanoparticles and thegrafted, homopolymerized secondary polymer), which in turn builds up a strong interfacial interaction with the surrounding,primary polymeric matrix during the subsequent mixing procedure. Due to the fact that different grafting polymers broughtabout different nanoparticle/matrix interfacial features, microstructures and properties of the ultimate composites could thusbe tailored. It was found that the reinforcing and toughening effects of the nanoparticles on the polymer matrix can be fullybrought into play at a rather low filler loading in comparison to conventional particulate filled composites.     

Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.     

含液晶聚合物的原位复合材料中界面相容性的改善策略

综述了近年来含液晶聚合物的原位复合材料中增容技术的一些进展,主要了四种增容技术,即加入具有增容作用的第三组分;在分散相液晶聚合物的主链上引入与基体树脂主链中相同或相似的单元,酯交换反应和多元共混技术,简要描术字原位复合材料的发展趋势。     

Lamination Design Optimization for Continuous Fiber Reinforced Composites of Variable Thicknesses北大核心CSCD

由于具备高的比强度、比刚度,利用连续纤维增强复合材料代替传统金属材料以实现结构轻量化正受到设计者们的广泛关注。然而,结构的复杂性给复合材料的铺层设计与优化带来了很大的挑战。针对航空用复合材料铺层设计约束多的问题,通过逐步构建设计变量准确表达结构的铺层信息。基于经典遗传算法框架,结合各设计变量特点,定义了铺层优化算法中的遗传算子,通过引入“修复”策略保证了每一代解都能满足设计约束,分布在可行域区间内。最后利用精英保留策略提高了算法的局部寻优能力,可以降低复杂复合材料结构铺层设计的计算成本。通过解决经典benchmark问题并与已有优化结果的比较,验证了前述铺层优化算法的全局、局部寻优能力,为工程实际中的复合材料铺层设计优化提供了理论支撑。     

Thermal and mechanical-induced phase transformations during YAG and alumina–YAG syntheses

The preparation of pure Y₃Al₅O₁₂ (YAG) and 50 vol% Al₂O₃–YAG composite powders by a wet chemical route is presented. The role of the synthesis temperature during reverse-strike precipitation has been investigated, showing its relevant effect on the purity and homogeneity of YAG powder. The composite material was prepared by comparing two different synthesis routes. A composite powder was synthesized via reverse-strike temperature-controlled co-precipitation. In the latter case, a pure-alumina precursor was firstly reverse-strike precipitated and then doped with an yttrium salt solution. For both syntheses, the role of thermal and mechanical pre-treatments on the phase development was demonstrated.     

Copolymers and two-layered composites of poly(<Emphasis Type="Italic">o</Emphasis>-aminophenol) and polyaniline

Electroactive conducting copolymers of aniline (ANI) and o-aminophenol (OAP) and two-layered poly(o-aminophenol) (POAP)/polyaniline (PANI) composites were prepared in aqueous acidic solution by electrode potential cycling. Copolymerization was carried out at different feed concentrations of OAP and ANI on a gold electrode. A strong inhibition of electropolymerization was found at a high molar fraction of OAP in the feed. The copolymers showed good adherence on the electrode surface and gave a redox response up to pH=10.0. Two transitions were observed in the in situ conductivities of the copolymers (as with PANI), but the conductivities were lower by 2.5–3 orders of magnitude as compared to PANI. Electrosynthesis of PANI on POAP modified electrodes showed copolymer formation after reaction initiation and finally formation of a PANI layer at the copolymer/solution interface. The ‘memory effect’ of the bilayer structures of both polymers was discussed in terms of protonation/deprotonation and anion consumption taking place during redox processes of both polymers.     

The influence of hydroxyapatite modification on the cross-linking of polydimethylsiloxane/HAp composites

Hydroxyapatite (HAp) was modified by the action of various hydrophobic agents based on silicon-containing compounds. The influence of the type of applied agent on the thermodynamic and kinetic parameters of the cross-linking of poly(dimethyl siloxane)/HAp composites was investigated. All the modified HAp particles became hydrophobic and these samples were used to synthesize the polysiloxane/hydroxyapatite composites (PDMS/HAp). The possible modes of interaction between the hydroxyapatite and hydrophobing agents were discussed. The most probable interaction between hydroxyapatite and the applied hydrophobing agents is hydrogen bonding. PDMS/HAp composites were formed directly in the cell of the DSC and cross-linking was investigated in situ. It was determined that the introduction of hydroxyapatite into polysiloxane matrices changed the enthalpy of cross-linking, as well as the activation energy of cross-linking and reaction order, while the introduction of modified HAp led to thermodynamic and kinetic parameters more similar to those of the cross-linking of unfilled elastomer.     

Molecular composites in thermosets

The synthesis of molecular composites where rigid polymer molecules are reinforcing elements in a thermoset bisimide matrix has been investigated. The approach has been designed to avoid phase separation by selecting systems where reaction of amine-terminated rigid and semiflexible oligomers with maleimide unsaturation occurs prior to crosslinking of the thermoset. This objective has been met for some compositions. The concentration and molecular weight of the rigid oligomers have been varied. The structure of the reinforcing polymer, the reactivity of the maleimide and the conditions for composite synthesis are variables of critical importance, and further work must determine the promise and limitations of this approach.     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.