Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.     

离子色谱-双阳极电化学氢化物发生-原子荧光光谱法测定Ⅰ型牙髓失活材料中的砷形态

将自制的双阳极电化学氢化物发生器作为离子色谱与原子荧光光谱的联用接口,建立了离子色谱-双阳极电化学氢化物发生-原子荧光光谱法在线分析砷形态系统.最佳实验条件为淋洗液6.0 mmol/L NH4H2PO4(pH 6.20),电解液0.40 mol/L H2SO4,电解液流量为阳极4.0 mL/min,阴极 1.5 mL/min,电解电流密度0.50 A/cm.2,载气流量300 mL/min,屏蔽气流量500 mL/min,氢气流量80 mL/min.在优化的实验条件下,As(Ⅲ)、DMA、MMA的线性范围为5～200 μg/L、As(Ⅴ)的线性范围为10～200 μg/L,As(Ⅲ)、DMA、MMA和As(Ⅴ)检出限分别为3.04、4.27、3.97和9.30 μg/L(信噪比S/N=3).50 μg/L的As(Ⅲ)、DMA、MMA和As(Ⅴ)混合标准溶液平行进样7次,得到的色谱峰面积的相对标准偏差(RSD)分别为415%、3.08%、519%和3.62%.将该方法用于牙髓失活材料中的砷形态分析.     

Py-GC/MS, GC/MS and FTIR investigations on LATE Roman-Egyptian adhesives from opus sectile: New insights into ancient recipes and technologies

An analytical protocol based on optical microscopy, Fourier transforms infrared spectroscopy (FTIR), analytical pyrolysis in the presence of hexamethyldisilazane followed by gas chromatographic/mass spectrometric analysis (Py-GC/MS) and gas chromatography/mass spectrometry after alkaline hydrolysis, solvent extraction and trimethylsilylation (GC/MS) was used in the chemical characterisation of the original adhesives used to fix monochrome and mosaic glass and stone plaques coming from the Late Roman archaeological site of Antinoopolis (Egypt).FTIR analysis demonstrated the presence of calcite fragments, and Py-GC/MS and GC/MS analyses provided detailed molecular compositions, highlighting the presence of a wide range of compound classes including diterpenoid acids, tricyclic abietanes with a high degree of aromatisation, mid- and long-chain monocarboxylic fatty acids, mono- and di-hydroxy acids, α,ω-dicaboxylic fatty acids, n-alkanols, and n-alkanes. Characteristic biomarkers and their distribution patterns indicated the presence of pine pitch in all the adhesives, which in some cases was admixed with beeswax and brassicaceae seed oil.The results provided new insights into the complex recipes used by artisans in ancient Egypt in the production of adhesives and in the sophisticated manufacture of opus sectile decorations.     

用数字化实验探究含氟牙膏背后的化学原理

为了说明含氟牙膏刷牙预防龋齿背后的化学原理,用鸡蛋壳代替牙齿设计了数字化实验。利用电导率传感器研究鸡蛋壳存在沉淀溶解平衡,利用压强传感器研究含氟牙膏水泡过的鸡蛋壳具有抗酸性,利用Logger Pro的线性拟合功能得到鸡蛋壳与盐酸反应的速率曲线,说明F-的保护时间有限。并从理论上分析了上述现象产生的原因。     

Composition Profiles of Dental Enamel Studied by X-Ray Photoelectron Spectroscopy (ESCA)

Abstract

The surfaces of both normal and fluoride treated human dental enamel were examined with x-ray photoelectron spectroscopy (ESCA). Using argon-ion etching to remove thin layers of enamel, subsurface layers were also analyzed. The resulting composition-depth profile showed that stannous fluoride produced a subsurface layer containing both tin and fluoride whereas fluorine was absent from the surface layer. Acid fluoride treatments, however, converted the surface to calcium fluoride which steadily decreased in concentration with depth.     

Monomers for Adhesive Polymers, 6

Summary: 1,3‐Bis(methacrylamido)propane‐2‐yl dihydrogen phosphate ( 1 ) was synthesised by phosphorylation of 1,3‐bis(methacrylamido)‐2‐hydroxypropane ( 2 ) with phosphorus oxychloride in tetrahydrofuran (THF) in the presence of triethylamine (TEA). The structure of the new monomer 1 was characterised by IR, ¹H NMR, ¹³C NMR and ³¹P NMR spectroscopies, elemental analysis and mass spectrometry. The monomer dissolves well in water, ethanol or aqueous THF and shows an improved hydrolytic stability compared to the corresponding methacrylate‐based dihydrogen phosphates. 1 was homopolymerised in ethanol with 2,2′‐azoisobutyronitrile (AIBN) as the initiator at 55–75 °C under the formation of an insoluble, cross‐linked product. Aqueous solutions of 1 are strongly acidic and enable to etch enamel and dentin. Nevertheless, 1 did not show any cytotoxic effect. Furthermore, the adhesive properties of 1 were measured.

1,3‐Bis(methacrylamido)propane‐2‐yl dihydrogen phosphate.     

Synthesis and Characterization of Catechol-Containing Polyacrylamides with Adhesive Properties

In this study, a row of four analogous dopamine acryl- and methacrylamide derivatives, namely N-(3,4-dihydroxyphenyethyl) acrylamide, N-(3,4-dihydroxyphenyethyl) meth acrylamide, N-phenethyl methacrylamide, N-(4-hydroxyphenethyl) methacrylamide were synthesized and characterized by ¹H-NMR and ¹³C-NMR, followed by further solvent-based radical polymerization with N-hydroxyethyl acrylamide. All copolymers were characterized by ¹H-NMR, dynamic differential calorimetry, and gel permeation chromatography. The dependency of the used comonomer ratios to the molecular mass of the corresponding copolymers has been described. The synthesis of the various polymers serves as a feasibility study and provides important data for a future biometric application in the medical field. We synthesized N-(3,4-dihydroxyphenyethyl) acrylamide copolymer up to 80 mol% by free radical polymerization without using any protecting groups. All polymers show identical perfect adhesive properties by a simple scratch test. Further, the monomers were used as a photo reactive glue formulation to test its adherence to a medical titanium surface sample by tensile shear test.     

Applications of Titanium Dioxide Nanostructure in Stomatology

Breakthroughs in the field of nanotechnology, especially in nanochemistry and nanofabrication technologies, have been attracting much attention, and various nanomaterials have recently been developed for biomedical applications. Among these nanomaterials, nanoscale titanium dioxide (nano-TiO₂) has been widely valued in stomatology due to the fact of its excellent biocompatibility, antibacterial activity, and photocatalytic activity as well as its potential use for applications such as dental implant surface modification, tissue engineering and regenerative medicine, drug delivery carrier, dental material additives, and oral tumor diagnosis and treatment. However, the biosafety of nano-TiO₂ is controversial and has become a key constraint in the development of nano-TiO₂ applications in stomatology. Therefore, in this review, we summarize recent research regarding the applications of nano-TiO₂ in stomatology, with an emphasis on its performance characteristics in different fields, and evaluations of the biological security of nano-TiO₂ applications. In addition, we discuss the challenges, prospects, and future research directions regarding applications of nano-TiO₂ in stomatology that are significant and worthy of further exploration.     

Preparation of Silica Aerogel/Resin Composites and Their Application in Dental Restorative Materials

As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 μm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.     

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey’s multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.