Recent advances in lattice gauge theories

Recent progress in the field of lattice gauge theories is briefly reviewed for a nonspecialist audience. While the emphasis is on the latest and more definitive results that have emerged prior to this symposium, an effort has been made to provide them with minimal technicalities.     

Influence of deformation on irreversible and reversible crystallization of poly(ethylene‐co‐1‐octene)

The effect of uniaxial deformation and subsequent relaxation at ambient temperature on irreversible and reversible crystallization of homogeneous poly(ethylene‐co‐1‐octene) with 38 mol % 1‐octene melt‐crystallized at 10 K min was explored by calorimetry, X‐ray scattering, and Fourier transform infrared spectroscopy. At 298 K, the enthalpy‐based crystallinity of annealed specimens increased irreversibly by stress‐induced crystallization from initially 15% to a maximum of, at least, 19% when a permanent set of more than 200% was attained. The crystallinity increased by formation of crystals of pseudohexagonal structure at the expense of the amorphous polymer, and as a result of destruction of orthorhombic crystals. The stress‐induced increase of crystallinity was accompanied by an increase in the apparent specific heat capacity from 2.44 to about 2.59 J g^?1 K^?1, which corresponds to an increase of the total reversibility of crystallization from, at least, 0.10 to 0.17% K^?1. The specific reversibility calculated for 100% crystallinity increased from 0.67 to 0.89% K^?1 and points to a changed local equilibrium at the interface between the crystal and amorphous phases. The deformation resulted in typical changes of the phase structure and crystal morphology that involve orientation and destruction of crystals as well as the formation of fibrils. The effect of the decrease of the entropy of the strained melt on the reversibility of crystallization and melting is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1223–1235, 2002     

Enhancement of thermopower in the highT c superconductor YBa2Cu3O7 and related compounds

The absolute thermopower of single phase YBa₂Cu₃O₇ and Y_0.8Er_0.2Ba₂Cu₃O₇ has been measured in the range 250 K to the superconducting transition temperature. It is found that these compounds show a large enhancement of thermopower in the range 150 K down toT _c. This enhancement shows a steep exponential drop as the temperature increases from the transition temperature. The temperature variation of the enhancement is too steep to be accounted for by electron-phonon or electron-local structural excitation mechanisms.     

Modeling structural recovery in glasses: An analysis of the peak‐shift method

Amorphous polymers below their glass‐transition temperature are inherently not at equilibrium. As a result, their structures continuously relax in an attempt to reach the equilibrium state. The current models of structural recovery can quantitatively describe the process. One of the parameters needed for the models is the nonlinearity parameter x. It has been proposed that x can be obtained from experimental data with the so‐called peak‐shift method. In this work, we use the Tool–Narayanaswamy–Moynihan model to identify the factors that determine the accuracy of the peak‐shift method and to quantify the errors in the value of x obtained from the peak‐shift method. In addition, we determine the influence of the error in x on the evaluation of the nonexponential model parameter β. Finally, the peak‐shift method is compared with the traditional curve‐fitting method for model parameter determination. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2027–2036, 2002     

High oven temperature — cold on-column injection for the automated CGC analysis of high molecular weight compounds such as triglycerides

Modification of the Carlo-Erba cold on-column injector for (automated) analysis of high molecular compounds at high oven temperature is described. The secondary cooling tube of the cold on-column injector is replaced by a lengthened tube through which a high air flow is directed. The injection site is maintained at 65–70 °C while the oven is at high temperature (? 300 °C). For automated injection, a short deactivated precolumn of 22 to 30 cm × 0.53 mm i.d. is coupled to the analytical column via a butt connector with make-up gas supply. For a triglyceride mixture, automatically injected at 300 °C, the mean % deviation for all peak areas was 1.8% and the mean % deviation for all retention times was 0.09 % for five consecutive runs.     

Highly Sensitive Differential Pulse Voltammetric Determination of Cd,Zn and Pb Ions in Water Samples Using Stable Carbon‐Based Mercury Thin‐Film Electrode

A new carbon‐based mercury thin‐film electrode consisting of screen‐printed carbon on a low temperature co‐fired ceramic substrate was made. Ex‐situ mercury deposition in a potassium thiocyanate solution was used. This approach an electrode with high long‐term stability (>500 measurement cycles) and reproducibility (≤2 %) for sensitive determination of ultra trace heavy metals, using differential pulse anodic stripping voltammetry. The detection limits were 0.25, 0.08 and 5.5 ng mL^?1 for Cd(II), Pb(II), and Zn(II), respectively. The method was applied to the determination of the analytes in water, wastewater, lake water, and certified reference material samples with satisfactory results.     

Miscibility of polycarbonates with copolymers containing cyclohexylmethacrylate

We prepared various copolymers containing styrene and methacrylates to examine their miscibility with polycarbonates such as bisphenol A polycarbonate (PC), dimethylpolycarbonate (DMPC), and tetramethylpolycarbonate (TMPC). Among the various copolymers examined, poly(methyl methacrylate‐co‐cyclohexylmethacrylate) [P(MMA–CHMA)] copolymers containing proper amounts of cyclohexylmethacrylate (CHMA) formed miscible blends with PC and DMPC, whereas TMPC did not form a miscible blend with P(MMA–CHMA). However, TMPC was miscible with poly(styrene‐co‐cyclohexylmethacrylate) [P(S–CHMA)] copolymers containing less than about 40 wt % CHMA, whereas PC and DMPC were always immiscible with P(S–CHMA). Miscible blends exhibited lower critical solution temperature (LCST)‐type phase behavior. Binary interaction energies were calculated from the observed phase boundaries with lattice–fluid theory combined with a binary interaction model. The quantitative interaction energy of each binary pair indicated that the phenyl ring substitution of polycarbonate with methyl groups did not lead to interactions that were favorable for miscibility with methyl methacrylate (MMA) and CHMA, but it did lead to favorable interactions with styrene. The addition of CHMA to MMA initially increased the LCST but ultimately led to immiscibility with PC and DMPC; however, addition of CHMA to styrene always decreased the LCST with TMPC. The increased LCST of PC or DMPC blends stemmed from intramolecular repulsion between MMA and CHMA, whereas the decreased LCST of TMPC/P(S–CHMA) blends with CHMA content came from negative interaction energy between styrene and CHMA. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1948–1955, 2001     

飞轮储能器的新型高温超导悬浮轴承研究

储能器是一种储存能量的装置,随着高温超导悬浮轴承运用到飞轮储能器中,储能效率得到了大大的提高。它的主要结构是由高温超导体和永磁体组成。文中提出一种全新高温超导悬浮轴承,并研究其的力学性能,为新型超导悬浮轴承的研究与开发做好了基础准备。     

Effect of aromatic substitution on phase behavior of blends of halogenated polystyrene and conventional polystyrene

Miscibility phase behavior in blends of poly(bromostyrene) with polystyrene (PS) has been investigated by means of time‐resolved light scattering, optical microscopy, and DSC. Cloud point phase diagrams of blends of conventional PS with poly‐(2‐bromostyrene) (P2BrS), poly‐(3‐bromostyrene), and poly‐(4‐bromostyrene) of comparable molecular weights were established by light scattering. Of particular interest is the fact that ortho, meta, and para substitutions in the styrenic aromatic rings of poly(bromostyrene) show profound effects on the composition–temperature phase diagrams of their blends with PS, exhibiting a lower critical‐solution temperature (LCST), an upper critical solution temperature (UCST), and combined LCST/UCST diagrams, respectively. Poly‐(2‐chlorostyrene) exhibits an LCST behavior very close to that of the P2BrS blend, suggesting that these types of halogen atoms may be inconsequential to phase behavior. A similar study has been extended to a PS blend containing commercial brominated PS (66 mol % bromine substitution) to determine what location of bromine substitution is crucial for miscibility enhancement in the flame‐retardant brominated PS blends. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1605–1615, 2001