Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature

Poly(d,l-lactide) (PDLLA) degraded at processing temperature under air and nitrogen. A random chain scission model was established and used to determine the activation energy E_a, and FT-IR, ¹H and ¹³C NMR were used to elucidate the degradation behavior under different atmospheres. Results showed that there were two to three stages. The 1st stage was dominated by the oligomers containing carboxylic acid groups and hydroxyl groups, during which oxygen and nitrogen had little effect on the degradation, thus they share similar E_a. When the oligomers were consumed over or evaporated, the 2nd stage began, and oxygen had a promoting effect on the thermo-oxidation process, resulting in the great decrease in E_a. The third stage of PDLLA was observed when it degraded under nitrogen over 200 °C, which was caused by the appearance of carboxylic acid substance.     

Thermal degradation kinetics of the biodegradable aliphatic polyester, poly(propylene succinate)

The preparation of the biodegradable aliphatic polyester poly(propylene succinate) (PPSu) using 1,3-propanediol and succinic acid is presented. Its synthesis was performed by two-stage melt polycondensation in a glass batch reactor. The polyester was characterized by gel permeation chromatography, ¹H NMR spectroscopy and differential scanning calorimetry (DSC). It has a number average molecular weight 6880 g/mol, peak temperature of melting at 44 °C for heating rate 20 °C/min and glass transition temperature at −36 °C. After melt quenching it can be made completely amorphous due to its low crystallization rate. According to thermogravimetric measurements, PPSu shows a very high thermal stability as its major decomposition rate is at 404 °C (heating rate 10 °C/min). This is very high compared with aliphatic polyesters and can be compared to the decomposition temperature of aromatic polyesters. TG and Differential TG (DTG) thermograms revealed that PPSu degradation takes place in two stages, the first being at low temperatures that corresponds to a very small mass loss of about 7%, the second at elevated temperatures being the main degradation stage. Both stages are attributed to different decomposition mechanisms as is verified from activation energy determined with isoconversional methods of Ozawa, Flyn, Wall and Friedman. The first mechanism that takes place at low temperatures is auto-catalysis with activation energy E = 157 kJ/mol while the second mechanism is a first-order reaction with E = 221 kJ/mol, as calculated by the fitting of experimental measurements.     

Chemical degradation of crosslinked ethylene-propylene-diene rubber in an acidic environment. Part II. Effect of peroxide crosslinking in the presence of a coagent

An investigation on the time-dependent chemical degradation of ethylene-propylene diene rubber containing 5-ethylidene-2-norbornene as diene cured by peroxide crosslinking in the presence of a coagent in an acidic environment (20% Cr/H₂SO₄) has been made. Two types of rubber, with comparable monomer composition, but having significant differences in molar mass and levels of long chain branching were tested. Dicumyl peroxide and triallylcyanurate under similar conditions were used for curing the rubbers. The molecular mechanisms of chemical degradation at the surface were studied using X-ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy, which demonstrate that several oxygenated species evolve during exposure. The primary process of degradation is hydrolytic attack on the crosslink sites, which is manifested by a decrease in crosslink density. The surface degradation is found to be strong enough to alter the bulk mechanical properties as observed by the change in retention in tensile strength, elongation at break, modulus at 50% elongation and, the change in micro-hardness. Retention in modulus at 50% elongation is found to follow a negative linear correlation with decrease in crosslink density. With higher molar mass and level of long chain branching more crosslinking occurs and thus comparatively more hydrolytic attack ensues. Scanning electron microscopy shows that the surface topography is significantly altered upon exposure and supports the notion of the dependence of degradation on the crosslinking density of the samples. Importantly, the coagent used in this study is shown to enhance the chemical degradation through formation of weaker sites for hydrolysis. The results also show that upon prolonged exposure the resulting oxygenated species tend to combine with each other.     

Formation of Aromatic and Other Unsaturated End Groups in Carboxymethyl Cellulose During Hot Alkaline Treatment

Carboxymethyl cellulose (CMC, DS 0.58) was treated in solutions of sodium hydroxide (0.001–1 M) at 95 °C. The treated (1–12 h) CMC samples were purified by dialysis and analyzed by UV spectroscopy and by UV resonance Raman spectroscopy (UVRRS) with excitation at 244 nm. A UV absorption maximum at 265 nm and a UVRR signal at 1650 cm⁻¹ were indicative of formation of -conjugated aldehyde end groups in CMC through -elimination. Another strong UVRR band at 1610 cm⁻¹ gave evidence on conversion of some of the -conjugated aldehyde end groups to alkali stable aromatic structures.     

Stability indicating high-performance thin-layer chromatographic determination of gatifloxacin as bulk drug and from polymeric nanoparticles

A simple, sensitive, selective, precise and stability indicating high-performance thin-layer chromatographic method for determination of gatifloxacin both as a bulk drug and from polymeric nanoparticles was developed and validated as per the International Conference on Harmonization (ICH) guidelines. The method employed thin-layer chromatography (TLC) aluminium plates precoated with silica gel 60F-254 as the stationary phase and the mobile phase consisted of n-propanol-methanol-concentrated ammonia solution (25%) (5:1:0.9, v/v/v). This solvent system was found to give compact spots for gatifloxacin (R_f value of 0.60 ± 0.02). Densitometric analysis of gatifloxacin was carried out in the absorbance mode at 292 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r = 0.9953 with respect to peak area in the concentration range of 400-1200 ng spot⁻¹. The mean value (±S.D.) of slope and intercept were 9.66 ± 0.05 and 956.33 ± 27.67, respectively. The method was validated for precision, accuracy, ruggedness and recovery. The limits of detection and quantitation were 2.73 and 8.27 ng spot⁻¹, respectively. Gatifloxacin was subjected to acid and alkali hydrolysis, oxidation, photodegradation and dry heat treatment. The drug undergoes degradation under acidic and basic conditions and upon wet and dry heat treatment. The degraded products were well separated from the pure drug. The statistical analysis proves that the developed method for quantification of gatifloxacin as bulk drug and from polymeric nanoparticles is reproducible and selective. As the method could effectively separate the drug from its degradation products, it can be employed as stability-indicating one.     

Thermal degradation of environmentally degradable poly(hydroxyalkanoic acid)s

Aliphatic polyesters have attracted industrial attention as environmentally degradable thermoplastics to be used for a wide range of applications. Besides intensive studies on the biodegradability of aliphatic polyesters, understanding of the thermal stability has importance for processing, application, and recycling. The details of thermal degradation processes of five types of aliphatic polyesters; namely, poly(L-lactide), poly(3-hydroxybutyric acid), poly(4-hydroxybutyric acid), poly(delta-valerolactone), and poly(epsilon-caprolactone), were investigated by means of several thermoanalytical techniques under both isothermal and non-isothermal conditions. In this feature article, the thermal degradation behaviors of aliphatic polyesters with different numbers of carbon atoms in the main chain of the monomeric unit are reviewed. In addition, the effects of chain-end structure and residual metal compounds on the thermal degradation processes of aliphatic polyesters consisting of hydroxyalkanoic acid monomeric units are presented. Schemes of thermal degradation reaction of poly(hydroxyalkanoic acid)s.     

Bayesian estimation and prediction for the transformed Wiener degradation process

This paper proposes some Bayesian inferential procedures for the transformed Wiener (TW) process, a new degradation process that has been recently suggested in the literature to describe degradation phenomena where degradation increments are not necessarily positive and depend stochastically on the current degradation level. These procedures have been expressly conceived to allow one incorporating into the inferential process the type of prior information, on meaningful physical characteristics of the observed degradation process, that is generally available in practical settings. Several different prior distributions are proposed, each of them reflecting a specific degree of knowledge on the observed phenomenon. Simple strategies for eliciting the prior hyper‐parameters from the available prior information are provided. Estimates of the TW process parameters and some functions thereof are retrieved by adopting a Monte Carlo Markov Chain technique. Procedures that allow predicting the degradation increment, the useful life of a new unit, and the remaining useful life of a used unit are also provided. Finally, an application is developed on the basis of a set of real degradation measurements of some infrared light‐emitting diodes, widely used in communication systems. The obtained results demonstrate the feasibility of the proposed Bayesian approach and the flexibility of the TW process.     

Thermal Degradation of Cellulose Nanocrystals Deposited on Different Surfaces

Thermal degradation of cellulose nanocrystals deposited on flat solid surfaces was monitored by AFM coupled with analysis of obtained images using image processor. The nanocrystals deposited on TiO₂ substrate showed different degradation patterns compared to those deposited on the nanosized layer of amorphous cellulose. The degradation was complete within 20 minutes at 300 °C. The nanocrystal deposited on amorphous cellulose resisted the heat treatment up to 120 minutes. Visual comparison and analysis of the AFM images clearly demonstrated the impact of temperature on the degradation rate of the nanocrystals deposited on TiO₂ substrate.     

Enhanced Photostability and Red-NIR Photosensitivity of Conjugated Polymer Charge-Transfer Complexes

A promising route to photostable and low-bandgap polymer materials for optoelectronic and photonic applications could be utilization of donor-acceptor ground-state charge-transfer complexes (CTCs) of wide-bandgap conjugated polymers. In this work, we report our results on photostability and photoelectric studies of CTC between an archetypical conjugated polymer MEH-PPV and low-molecular-weight acceptor 2,4,7-trinitrofluorenone (TNF). By using the pump-probe laser photobleaching technique, we show that the photodegradation rate of MEH-PPV:TNF blend films decreases up to four orders of magnitude as compared with pristine MEH-PPV. By using photocurrent and surface photovoltage spectroscopies, we demonstrate that the photoelectric sensitivity of the MEH-PPV:TNF CTC can be deeply extended in the polymer optical gap down to 1 µm. However, the main drawback of the CTC studied is their low charge collection efficiency, and an approach to increasing it is discussed.     

Influence of degradation on the crystallization behaviour of a biodegradable segmented copolymer constituted by glycolide and trimethylene carbonate units

The influence of degradation on non-isothermal crystallization from the melt of a segmented copolymer constituted of glycolide and trimethylene carbonate units and used as a bioabsorbable surgical suture was studied by optical microscopy, differential scanning calorimetry and time-resolved X-ray diffraction. Fibrillar positive spherulites were obtained with slightly degraded samples but new axialitic morphologies were detected when samples had a molecular weight, M_w, lower than 29,000 g/mol and the crystallization started at a high temperature.Crystal growth kinetics of samples degraded under different conditions was evaluated over a wide temperature range by a non-isothermal method. Two crystallization regimes (I and II) were determined for the more degraded samples (i.e., those able to crystallize according to axialitic and spherulitic morphologies), whereas only regime II was found for samples of higher molecular weights. Primary nucleation density decreased with the extent of degradation provided no morphological changes occurred, and so did the regularity of lamellar stacking, as shown by synchrotron measurements, although the morphological parameters remained practically constant.