A two-dimensional infrared correlation spectroscopic study on the thermal degradation of poly(2-hydroxyethyl acrylate)-co-methyl methacrylate/SiO2 nanohybrids

Two-dimensional infrared (2D IR) correlation spectroscopy was applied to study the structural changes occurring in the decomposition of PHEA-co-MMA/SiO₂. Complicated absorption spectral changes were observed in the heating process. 2D IR analysis indicates that during heating, covalent bonds, (Si-O-C), between the polymer and the inorganic moiety were formed, which was the main factor in the improvement in thermal properties of the hybrids such as the decomposition temperatures (T_d). The thermal stability of the hybrids was also studied by solid-state ²⁹Si MAS NMR spectroscopy and TGA tests. Their results complemented each other well.     

Degradative analysis of aquatic fulvic acid: CuO oxidation versus pyrolysis after tetramethylammonium hydroxide treatments in air and helium atmospheres

The structural composition of Nordic aquatic reference fulvic acid was investigated using chemical and thermal degradation methods: alkaline CuO oxidation and analytical pyrolysis after tetramethylammonium hydroxide (TMAH) pretreatment. Off-line procedures of the TMAH treatments were carried out under both air and helium atmospheres, with the aim of clarifying the effect of oxygen. Irrespective of the fact that the chemical and thermal degradation methods gave qualitatively quite similar basic products (mainly phenols and phenolic acids together with aromatic and aliphatic carboxylic acids), they also revealed their unique selectivity and efficiency for releasing different kinds of structural constituents. The results verify the formation of additional carboxyl functionality in the CuO oxidation. However, some similar oxidative reactions also appeared to take place during the pretreatment procedures of strongly basic TMAH, especially under an air atmosphere. The use of inert and protective atmosphere during the TMAH pretreatment is therefore recommended for producing more relevant structural information about the complex composition of humic substances.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

Catalytic degradation of polystyrene using HUSY catalysts

Summary The addition of carbon dioxide to phenyl glycidyl ether (PGE) was investigated in a semi-batch reactor using immobilized quaternary ammonium chloride catalysts. Five different catalysts were prepared with the following supports : (1) soluble poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC) [C1], (2) insoluble poly(ST-DVB-VBC) [C2], (3) macroporous poly(ST-DVB-VBC) [C3], (4) poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC)-MMT [C4] (5) modified MCM-41 [C5]. The addition of carbon dioxide to PGE can be considered as a pseudo-first order process with respect to the concentration of PGE. The pseudo-first order rate constant for the catalysts decreased in the series C1&gt;C3&gt;C2&gt;C4&gt;C5. The activation energy for C1 to C5 catalysts was 8.6, 20.9, 19.9, 23.9, and 26.8 kJ/mol, respectively. The immobilized catalysts can be reused in least 4 successive runs without any considerable loss of their initial reactivities.     

Thermal degradation of copolymers of styrene with dicarboxylic acids - II: Copolymers obtained by radical copolymerisation of styrene with maleic acid or fumaric acid

Thermal degradation processes in copolymers of styrene with two stereoisomers of 1,2-ethylenedicarboxylic acids (i.e. maleic acid (the cis-isomer) and fumaric acid (the trans-isomer)) have been studied by mass spectrometry, FTIR and TG measurements. The influence of the chemical composition on thermal degradation of copolymers with acid by non-isothermal thermogravimetric analysis (TG) was also studied. The stereo-configuration of carboxyl groups in copolymers was analysed by potentiometric titration. It was found that copolymers degrade in two main complex stages. The initial step in the decomposition involves the formation of cyclic five-membered anhydrides. The presence of trans configuration of carboxyl groups hinders the formation of cyclic anhydrides and shifts the decomposition to higher temperatures, making decarboxylation competitive. At higher temperatures anhydride decomposition takes place and finally the degradation of main chains occurs.     

Degradation of polystyrene using montmorillonite clay catalysts

Summary The performance of acid-treated montmorillonite catalysts in the degradation of polystyrene (PS) was investigated in this study. The degradation was carried out in a semi-batch reactor with a mixture of PS and catalyst at 400-450^oC. The commercial Süd Chemie acid-treated montmorillonite clays (K-series) showed good catalytic activity for the degradation of PS. The styrene monomer and ethylbenzene were major liquid products. The increase of surface acidity enhanced further cracking of styrene dimer and trimer to produce styrene monomer. Higher production of ethylbenzene for K30 may be related to its bigger pore volume and surface area compared to those of K5. High degradation temperature favored styrene monomer production.     

液晶光定向层材料

本文综述了近10年来液晶显示用光定向层材料领域的研究现状和进展情况，主要概述了光降解型、光致异构型、光交联型以及自组装等材料，并对目前报道的液晶光定向机理进行了总结和归纳。     

Non isothermal heat capacities and chemical reactions using a modulated DSC

An evaluation of measurements of heat capacities by modulated differential scanning calorimetry, MDSC is presented. Heat capacities were obtained from 130 to 550 K by a non isothermal technique in which a periodic modulation was added to the linear heating rate. Effects of amplitude and period of modulation, sample weight, sample type, pan type, and cell imbalance are described. Results are compared with those obtained using the isothermal technique. Heat capacity could be measured well into the decomposition region and separated from the non reversing signal due to chemical reaction (degradation), thus allowing a precise detection of onsets of the thermal degradation. This additional information will aid in the interpretation of the degradation chemistry, a field vital for the petroleum-industry.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayPart of this paper was presented at the 23rd Conference of the North American Thermal Analysis Society, Toronto, Canada, September 25–28, 1994.The author (MVN) acknowledges the experimental assistance provided by J. Balogh of Exxon Research and Engineering Company, Linden. Helpful discussions with A. Boller of the University of Tennessee at Knoxville, Dr. Y. Jin, General Electrical, and Dr. S. Sauerbrunn formerly of TA Instruments are also acknowledged.     

Initiation of polymer degradation via transfer of infectious species

A novel dual stage chemiluminescence detection system incorporating individually controlled hot stages has been developed and applied to probe for material interaction effects during polymer degradation. Utilization of this system has resulted in experimental confirmation for the first time that in an oxidizing environment a degrading polymer A (in this case polypropylene, PP) is capable of infecting a different polymer B (in this case polybutadiene, HTPB) over a relatively large distance. In the presence of the infectious degrading polymer A, the thermal degradation of polymer B is observed over a significantly shorter time period. Consistent with infectious volatiles from material A initiating the degradation process in material B it was demonstrated that traces (micrograms) of a thermally sensitive peroxide in the vicinity of PP could induce degradation remotely. This observation documents cross-infectious phenomena between different polymers and has major consequences for polymer interactions, understanding fundamental degradation processes and long-term aging effects under combined material exposures.     

治理塑料废弃物新技术途径探讨--专论可降解塑料的研究开发

综述了可降解塑料的研究开发现状及其进展。可降解塑料的降解时控性研究，合成，加工工艺改进以及降低成本的研究，可控光－生物降解的合成降解性研究和一次性使用塑料实用性研究，仍是今后需要深入探讨的重要研究课题。