Studies of Anion Transport Through Supported Liquid Membrane

Abstract

Transport studies of anions were investigated through cellulose triacetate supported liquid membrane. The experimental variables explored were concentration of anions, sodium hydroxide, and stirring speed. The two-channel membrane system has been explored for the transport of carbonate ions from source to receiving phases. Carbonate ions are selectively transported through the cellulose triacetate supported liquid membrane in comparison with that of nitrate and sulfate. Sulfate and nitrate anions are strongly held in the cellulose triacetate membrane, and then stripped out later. Carbonate ions are loosely bound to the cellulose triacetate membrane and stripped out earlier.     

Microwave-Assisted Method for Synthesis of 1,3-Disubstituted Pyrroles

1,3-Disubstituted pyrroles were prepared by a microwave-assisted reaction of pyrrolidine and aldehydes in toluene as well as in solvent-free conditions. Reactions were completed in a few minutes in the solvent-free condition but a long time (up to 30 min) was necessary to complete reactions in toluene. Yields of products depended considerably on the aldehyde used.     

A picosecond widely tunable deep-ultraviolet laser for angle-resolved photoemission spectroscopy

We develop a picosecond widely tunable laser in a deep-ultraviolet region from 175 nm to 210 nm,generated by two stages of frequency doubling of a 80-MHz mode-locked picosecond Ti:sapphire laser.A β-BaB2O4 walk-off compensation configuration and a KBe2BO3F2 prism-coupled device are adopted for the generation of second harmonic and fourth harmonics,respectively.The highest power is 3.72 mW at 193 nm,and the fluctuation at 2.85 mW in 130 min is less than ±2%.     

Eco-friendly solution processing of all-polymer solar cells: Recent advances and future perspective

All-polymer solar cells (all-PSCs) exhibit great potentials in commercial applications. All-PSCs have observed steady performance gains with power conversion efficiency now reaching over 17% in the open literature. However, the current processing of all-PSCs relies predominantly on toxic, chlorinated solvents in moisture-free environments, representing a significant barrier for their commercialization due to the added costs to handle and dispose of such solvents. There is thus an urgent need for safe, environmentally benign, and sustainable ink-based processing methods to produce all-PSC devices reliably and reproducibly in ambient air. In this perspective, fundamental insights on the interplay between all-polymer blend morphologies and eco-friendly solvents are provided. Also, we discuss the recent successes of the green processing methods to manipulate the photoactive morphologies for high-efficiency all-PSCs. In the end, we provide an outlook on future challenges and opportunities of eco-friendly solvents processed all-PSCs for large-scale manufacturing.     

Heavy-Atom Tunneling in Semibullvalenes: How Driving Force,Substituents, and Environment Influence the Tunneling Rates

The Cope rearrangement of selectively deuterated isotopomers of 1,5-dimethylsemibullvalene 2 a and 3,7-dicyano-1,5-dimethylsemibullvalene 2 b were studied in cryogenic matrices. In both semibullvalenes the Cope rearrangement is governed by heavy-atom tunneling. The driving force for the rearrangements is the small difference in the zero-point vibrational energies of the isotopomers. To evaluate the effect of the driving force on the tunneling probability in 2 a and 2 b , two different pairs of isotopomers were studied for each of the semibullvalenes. The reaction rates for the rearrangement of 2 b in cryogenic matrices were found to be smaller than the ones of 2 a under similar conditions, whereas differences in the driving force do not influence the rates. Small curvature tunneling (SCT) calculations suggest that the reduced tunneling rate of 2 b compared to that of 2 a results from a change in the shape of the potential energy barrier. The tunneling probability of the semibullvalenes strongly depends on the matrix environment; however, for 2 a in a qualitatively different way than for 2 b .     

Synthesis,spectral, DFT calculations and biological studies of solvatochromic copper(II)-ONS hydrazone derived from 2-aminochromone-3-carboxaldehyde

New ONS hydrazone ligand, 2-[(2-aminochromon-3-yl)methylidene]-N-phenylhydrazinecarbothioamide, HL , was synthesized and reacted with different salts of Cu (II) ion (OAc⁻, NO₃⁻, SO₄²⁻ and Cl⁻) in absence and presence of secondary ligands (L′); 8-hydroxyquinoline, 1,10-phenanthroline or SCN⁻; to form binary and ternary Cu(II)-chelates. The ligand and its Cu(II)-complexes were fully characterized by analytical, spectral, thermal, conductivity and magnetic susceptibility measurements. The metal chelates showed octahedral, square planar and /or distorted tetraherdal arrangements. Coats–Redfern equations used to calculate the kinetic parameters of the thermal decomposition stages (E_a, A, ΔH, ΔS and ΔG). The compounds exhibit luminescence property; promising interesting potential applications as photoactive materials. Lippert–Mataga, Bakhshiev, Kawski–Chamma–Viallet and microscopic solvent polarity parameter and E_T^N correlation methods were applied on the solvatochromic shifts of emission spectra to evaluate the ground (μ_g) and excited (μ_e) states dipole moments. Excited state dipole moment is larger than the ground state which may be attributed to π-π* transition. The coordinating anions play an important role on the position and intensity of emission band. The ligand and its metal complexes showed antimicrobial activity towards Gram–positive bacteria, Gram–negative bacteria, yeast and fungus. The molecular structural parameters of HL and its Cu(II)- complexes have been calculated on the basis of DFT engaged in the Gaussian 09 program at the B3LYP/6-31G(d,p) level; the theoretical data are correlated with the experimental data.     

2-Methyltetrahydrofuran (2-MeTHF) as a versatile green solvent for the synthesis of amphiphilic copolymers via ROP,FRP, and RAFT tandem polymerizations

2-methyltetrahydrofuran (2-MeTHF) is a readily available, inexpensive, neoteric, bio-based solvent. It has been adopted across a wide range of chemical processes including the batch manufacture of fine chemicals, enzymatic polycondensations and ring opening polymerizations. To reduce the environmental burden related to the synthesis of pharmaceutical-grade polymers based on lactide and caprolactone, we envisaged the use of 2-MeTHF. For the first time, we combined a series of metal-free and enzymatic ROPs with free radical and controlled RAFT polymerizations (carried out separately and in tandem) in 2-MeTHF, in order to easily tune the chemistry and the architecture of the final polymers. After a simple purification, the amphiphilic polymers were formulated into nanoparticles and tested for their cytocompatibility in three model cell lines, to assess their application as potential polymeric excipients for nanomedicines.     

Solvent‐free ring‐opening polymerization of lactones with hydrogen‐bonding bisurea catalyst

Development of effective organocatalysts for the living ring‐opening polymerization (ROP) of lactones is highly desired for the preparation of biocompatible and biodegradable polyesters with controlled microstructures and physical properties. Herein, a new class of hydrogen‐bond donating bisurea catalysts is reported for the ROP of lactones under solvent‐free conditions. ROP of lactones mediated by the bisurea/7‐methyl‐1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (MTBD) catalyst exhibits a living/controlled manner, affording the polymers and copolymers with the well‐defined structure, predictable molecular weight, narrow molecular weight distribution, and high selectivity for monomer at low catalyst loadings at ambient temperature. The possible mechanism of bisurea/MTBD‐catalyzed ROP of lactones is proposed, in which the bisurea activates the carbonyl group of lactones while MTBD facilitates the nucleophilic attack of the initiating/propagating alcohol by hydrogen bonding. Moreover, the poly(ε‐caprolactone‐co‐δ‐valerolactone) [P(CL‐co‐VL)] random copolymers with various compositions were synthesized using the bisurea/MTBD catalyst. The measurements of thermal properties and crystalline structure demonstrate that the CL and VL units are cocrystallized in the crystalline phase of P(CL‐co‐VL) copolymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 90–100     

Stimuli-Responsive Fluorescent Nanoswitches: Solvent-Induced Emission Enhancement of Copper Nanoclusters

Copper nanoclusters (CuNCs) as a new class of fluorescent materials have attracted a great deal of interest due to their outstanding fluorescence properties. In this work, a variety of organic solvents were used to induce self-assembly of glutathione-capped CuNCs (GSH-CuNCs) to form ordered assemblies with enhanced fluorescence properties. Assemblies with multicolor fluorescence emission were constructed on the basis of the aggregation-induced emission (AIE) of GSH-CuNCs and the solvent effect. The fluorescence emission from these GSH-CuNCs assemblies can also be tuned from yellow to purple by changing the organic solvent. A possible mechanism based on the size of the assemblies and electron transfer was explored to explain the solvent effects on GSH-CuNCs. Stimuli-responsive nanoswitches with excellent reversibility can be controlled by changing the type of organic solvent and the ratio of the organic solvent to the aqueous solution of GSH-CuNCs. As the CuNCs assemblies exhibit strong, stable, and color-tunable fluorescence, they were employed as color-conversion materials for recognizing different organic solvents.