SEC–MALLS analysis of cellulose using LiCl/1,3-dimethyl-2-imidazolidinone as an eluent

The lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) solvent system for cellulose was adopted as a mobile phase of size-exclusion chromatographic (SEC) analysis of cellulose, and the applicability of this system was examined using multi-angle laser light scattering and ¹³C-NMR analysis. The results indicate that 8% (w/v) LiCl/DMI ID a true solvent for cellulose, and that cellulose molecules dissolving ID 1% (w/v) LiCl/DMI are separated orderly depending on their molecular mass (MM) or root-mean-square (RMS) radius by the SEC system. Practically, no aggregates were detected ID the dilute cellulose/LiCl/DMI solutions. Furthermore, high stability of cellulose/LiCl/DMI solutions has been demonstrated; only a few percent of decline ID average MM was observed even after storage for 6 months at room temperature. Relationships between RMS radius and MM for hardwood bleached kraft pulp ID 1% LiCl/DMI was estimated as the following equation: _g^0.59, corresponding to a Mark–Houwink–Sakurada exponent of 0.77.     

Starburst dendrimer-supported pseudostationary phases for electrokinetic chromatography

Pseudo-stationary phases for electrokinetic chromatography were prepared by the alkylation of starburst dendrimers (SBDs). The SBD-supported pseudo-stationary phase with dodecyl groups showed higher efficiency than short-akyl derivatives, and maintained the hydrophobic property inthe presence of methanol. The dodecyl-modified SBD provided wide migration time windows ar high methanol content to effect the separation of sixteen aromatic hydrocarbons, the priority pollutants designated by EPA, in 65% methanol. The selectivity of polymer-supported pseudo-stationary phase can be varied simply by changing the length of the alkyl groups. The dodecyl SBD showed relatively similar selectivity as sodium dodecyl culfate micelle, whereas short alkyl derivatives showed preference towards rigid and planar compounds based on the rigid and planar compounds based on the rigid polymer backbones. The selectivity of SBD-supported pseudo-stationary phases was dominated by the chain length of the alkyl groups, with the minor effect of the structure of the core and the generation of SBD where alkyl groups were attached.     

Pressurised solvent extraction for organotin speciation in vegetable matrices

Because organotin compounds (OTC) are widely used in many fields of activity, they have become an ubiquitous environmental presence. The presence of organotins in the environment impacts upon food safety, making it important to monitor the levels of organotin pesticides in fruits and vegetables. Nevertheless, only a few studies have been published on organotin speciation in plants. The objective of the present study was to evaluate and optimise a specific procedure based on pressurised solvent extraction (PSE) that is suitable for monitoring organotin content in vegetables. In ASE, solvents are used at elevated temperatures and pressures to increase the rate and efficiency of the extraction process. The results from this procedure were compared to those from the technique usually employed, solid/liquid extraction (SLE) performed in an acidic solvent by mechanical shaking. Three extracting solutions were tested—methanol, ethyl acetate and a mixture of methanol and ethyl acetate—and the mixture was found to give the most quantitative results while preserving the speciation. French bean and lettuce leaves as well as potato tubers were used as the plant materials. These vegetables were considered because they are the vegatables consumed in the most quantities in Europe. The study focuses on trisubstituted OTCs, which are the most toxic tin species. The samples were spiked with four trisubstituted organotins: tributyltin (TBT), triphenyltin (TPhT), tricyclohexyltin (TcHexT) and trioctyltin (TOcT). The influence of the pressure and the temperature of the PSE on the quantitativity of the process and on species preservation was evaluated using the experimental design methodology. The optimised PSE allowed detection limits down to 1–2 ng (Sn) g^–1 to be reached. These are higher than those obtained by SLE (0.1–1 ng (Sn) g^–1). Although the repeatability is similar for both PSE and SLE (2–12% for triorganotin compounds), this appears to be highly time-dependent in the case of SLE. Comparison with SLE confirms that PSE is an interesting tool for vegetable analysis considering the satisfactory OTC preservation and repeatability obtained for a relatively short extraction duration (only 15 min against 2–12 h for SLE).     

Neutral solvent/crown ether interactions 3. Reorientation of the hydrogen bonds in the low temperature (−150°C) structure of 18-crown-6·2(CH3NO2)

The title complex was crystallized from a saturated solution of 18-crown-6 in nitromethane at 5°C and cooled to –150°C prior to X-ray diffraction data collection. At –150° C 18-crown-6·2(CH₃NO₂) is monoclinic,P2₁/_n witha=9.290(2),b=7.864(6),c=13.627(8) Å, =1000.84(4)° andD _calc=1.31 g cm^–3 for Z=2. Leastsquares refinement using 1521 independent observed reflections [F _o5(F _o)] led to a final conventionalR value of 0.041. The complex at –150°C is isostructural with its room temperature structure with the exception of the orientation of the methyl hydrogen atoms and their crown ether oxygen interactions. The methyl group hydrogen atoms were fully refined isotropically. The crown ether resides around a center of inversion and hasD _3d symmetry. There is one methyl hydrogen...crown interaction at 2.35(3) Å, one apparently bifurcated hydrogen bond utilizing a second methyl hydrogen atom (2.55(3), 2.65(3) Å) and the third hydrogen atom is actually directed away from the crown ring (closest H...O contact=2.67(3) Å). Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82048 (5 pages).For part 2, see reference [24].     

Effect of solvent upon competitive liquid-liquid extraction of alkali metal cations by isomeric dibenzo-16-crown-5-oxyacetic acids

The selectivity and efficiency of competitive liquid-liquid extraction of alkali metal cations into organic solvents containingsym-(octyl)dibenzo-16-crown-5-oxyacetic acid (2) andsym-bis[4(5)-tert-butylbenzo]-16-crown-5-oxyacetic acid (3) have been determined. Solvents examined include: dichloromethane, chloroform, carbon tetrachloride, 1,2-dichloroethane, 1,1,1-trichloroethane, benzene, toluene,p-xylene, chlorobenzene, 1,2-dichlorobenzene, and 1,2,3,4-tetrahydronaphthalene. The Na⁺/K⁺ and Na⁺/Li⁺ extraction ratios are highest in chloroform. The extraction selectivity is found to correlate with the diluent parameter (DP) of the organic solvent.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Influence of the Coordination of Donor Solvent Molecules to 1,4,7,10-Tetramethyl-1,4,7,10- tetraazacyclododecanenickel(II) and Analogous Nickel(II) Complexes on Their Steric Factors

Coordination equilibrium constants (K _NiS) of some donor solvent molecules to 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecanenickel(II) ([Ni(Me₄[12]aneN₄)]²⁺) were determined in nitrobenzene (a noncoordinating bulk solvent). The first (K _NiS1) and second stepwise coordination equilibrium constants (K _NiS2) for 1,4,7,10-tetraazacyclododecanenickel(II) ([Ni([12]aneN₄)]²⁺), 1,4,8,11-tetraazac yclotetradecane- nickel(II) ([Ni([14] aneN₄)]²⁺), 1,4,8,11-tetrathiacyclotetra-decanenickel(II) ([Ni([14]aneS₄)]²⁺) were also reinvestigated. The K _NiS values for [Ni(Me₄[12]aneN₄)]²⁺ were compared to those of [Ni([12]aneN₄)]²⁺, (1R,4S, 8R,11S)-1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecanenickel(II) (R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺), R,R,S,S-[Ni(Me₄[14]aneN₄)]²⁺, [Ni([14]aneN₄)]²⁺, and [Ni([14]aneS₄)]²⁺. Coordination of pyridine (Py), N,N,N′,N′-tetramethylurea (TMU), and N,N-dimethylacetamide (DMA) to [Ni(Me₄[12]aneN₄)]²⁺ was observed, although these donor solvent molecules did not coordinate to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺. The K _NiS values for Py, TMU, and DMA are 7.9, 2.8, and 9.0 dm³⋅mol⁻¹, respectively. Some hydrogen-bonding waters were coordinated to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺, but such waters did not coordinate to [Ni(Me₄[12] aneN₄)]²⁺. Also, the K _NiS2 values were larger than the corresponding K _NiS1 values for [Ni([14]aneS₄)]²⁺. Furthermore, the K _NiS1 values for [Ni([12]aneN₄)]²⁺ were the largest among these nickel(II) complex cations. The K _NiS, K _NiS1, and K _NiS2 values are discussed in terms of properties of the donor solvents and steric strains of these nickel(II) complex cations.     

Thermodynamics of Solvation of 18-Crown-6 and Its Alkali-Metal Complexes in Various Solvents

Heats of solution of 1,4,7,10,13,16-hexaoxacyclooctadecane (18-crown-6) in acetonitrile, 1,2-dichloroethane, N,N-dimethylformamide, dimethyl sulfoxide, nitromethane, propylene carbonate, pyridine and water were measured at 25 °C and the enthalpies of the transfer of 18-crown-6 from waterto the aprotic solvents were derived. The thermodynamic quantities, G₁°, H₁° and T S₁°, for the formation of the[M(18-crown-6)]⁺ (M⁺ = Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) complexeswere determined by titration calorimetry in dimethyl sulfoxide containing0.1 mol dm^-3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25 °C. These thermodynamic quantities suggest that the complexationof 18-crown-6 with the alkali-metal ions mainly reflects the different solvationof 18-crown-6 and also the different degree of solvent structure.     

Solubility of Triethylamine in Tetraethylammonium Chloride Aqueous Solutions from 20 to 35°C

Solubilities of triethylamine in aqueous tetraethylammonium chloride solutions were measured at 20, 25, and 35°C. The molalities in Et₄NCl of the aqueous solvents ranged from 0.03 to 1 mol-kg^–1. The data were evaluated from density measurements using a vibrating-tube densimeter. At each temperature, least-squares method was used to fit experimental density data points to double polynomial equations of various degrees. Triethylamine molalities of the saturated aqueous phases were estimated by extrapolation from those equations. Experimental data were interpreted in terms of hydrophobic and electrostatic perturbed domains in the hydration shells of the noneleceory and of the cation of the salt, as a function of temperature and salt concentration. The conclusions obtained are consistent with previous volumetric studies.     

Correlation between excess adsorption data measured for solvent mixture/adsorbent systems and RM values obtained for different solutes chromatographed in binary mobile phases

This paper concerns the application of excess adsorption isotherms, measured for solvent mixture/adsorbent systems, to the characterization of TLC data. For this purpose the excess adsorption isotherms for three liquid mixtures: cyclohexane/ benzene, benzene/acetone, and carbon tetrachloride/ethyl acetate on silica gel at 20°C have been measured. These mixtures have been used as binary mobile phases in TLC measurements. It has been shown for a given solute in binary mobile phase that the quantity R_M is a simple function of the excess adsorption. Parameters of this function have been used to characterize chromatographic systems with binary mobile phases.