低共熔溶剂中原位合成ZIF-8膜及其气体分离性能

在α-氧化铝载体上,采用原位合成法,在尿素/氯化胆碱低共熔溶剂中合成了ZIF-8膜。采用X射线衍射(XRD)和扫描电子显微镜(SEM)对合成的ZIF-8膜进行了表征。考察了反应溶液浓度、降温速率对ZIF-8膜合成的影响。通过优化合成条件合成了表面平整致密,厚度为8 μm的ZIF-8膜。采用Wicke-Kallenbach技术对优化条件下合成的ZIF-8膜进行了单组分气体渗透和双组分混合气体分离性能表征。在室温(293 K)下,ZIF-8膜对H2/CO2、H2/O2、H2/N2、H2/CH4双组分气体的分离系数分别为7.4、5.2、9.1、13.8,均大于相应的努森扩散分离系数,说明合成的ZIF-8膜具有分子筛分性能。     

Viscosities of Binary and Ternary Mixtures of Water,Alcohol, Acetone,and Hexane

This articles studied and determined the viscosities of the binary mixtures of water–methanol, water–ethanol, water–propanol, water–acetone, acetone–ethanol, methanol–ethanol, and acetone–hexane and the ternary mixtures of water–methanol–ethanol and water–ethanol–acetone at 20°C. It is shown that the mixing of water with the alcohols and acetone resulted in a positive deviation of viscosity, which reached the maximum value at the water mole fraction x ₁ ～ 0.7 for water–methanol, x ₁ ～ 0.72 for water–ethanol, x ₁ ～ 0.74 for water–propanol, and x ₁ ～ 0.83 for water–acetone binary mixture. This viscosity deviation can be mainly attributed to the formation of micelles of alcohol or acetone molecules in water because of the hydrophobic attraction between the hydrocarbon chains. The micelle surfaces are surrounded by hydration layers, leading to the positive viscosity deviation in the liquid mixtures because the water in hydration layers has a much higher viscosity than bulk water. Also, the contrary observation was found in the binary mixtures of acetone–ethanol and acetone–hexane, having a negative viscosity deviation.     

Dynamic Surface Elasticity of Polyelectrolyte/Surfactant Adsorption Films at the Air/Water Interface: Carboxylmethylchitosan and Cetyltrimethylammonium Bromide

The dynamic surface elasticity of the solution of carboxymethylchitosan (CMCH) and cetyltrimethylammonium bromide (C₁₆TAB) was measured as a function of the surfactant concentration and the surface age by the oscillating drop method. The results showed that the surface layer of the CMCH/C₁₆TAB solution transformed from loose to structured with the increase in the surfactant concentration. The surface elasticity versus the surface pressure curve during the adsorption showed different features at different surfactant concentration ranges, which was connected with the structural transformation of the surface layer. Our results show that the measurement of dynamic surface dilational properties is a powerful tool for studying the surface kinetics, which is helpful for dealing non-equilibrium systems in industry.     

低共熔溶剂：一种应用在混合物分离过程中的绿色溶剂

低共熔溶剂(DESs)因具有合成容易、价格低廉、环境友好、挥发性低、溶解能力强、可生物降解、结构可设计等特点,被认为是一种绿色溶剂。近年来,研究者通过深入研究低共熔溶剂的性质,结合低共熔溶剂的特点,将其替代传统的有机溶剂,在混合物分离过程中开展了大量的研究工作,包括：酸性气体(如CO₂、CO₂和H₂S)吸收、生物活性物质萃取、燃料油品中含硫和含氮化合物的脱除、油酚混合物分离、芳烃和脂肪烃混合物的分离、醇水混合物分离、生物柴油合成过程中甘油的脱除等。本文分析了低共熔溶剂的结构、性质和特点,综述了低共熔溶剂在分离领域的最新研究成果,探讨了低共熔溶剂在混合物分离应用中存在的问题,展望了低共熔溶剂的发展趋势。     

Ionothermal Synthesis of Imide‐Linked Covalent Organic Frameworks

Covalent organic frameworks (COFs) are an extensively studied class of porous materials, which distinguish themselves from other porous polymers in their crystallinity and high degree of modularity, enabling a wide range of applications. COFs are most commonly synthesized solvothermally, which is often a time‐consuming process and restricted to well‐soluble precursor molecules. Synthesis of polyimide‐linked COFs (PI‐COFs) is further complicated by the poor reversibility of the ring‐closing reaction under solvothermal conditions. Herein, we report the ionothermal synthesis of crystalline and porous PI‐COFs in zinc chloride and eutectic salt mixtures. This synthesis does not require soluble precursors and the reaction time is significantly reduced as compared to standard solvothermal synthesis methods. In addition to applying the synthesis to previously reported imide COFs, a new perylene‐based COF was also synthesized, which could not be obtained by the classical solvothermal route. In situ high‐temperature XRPD analysis hints to the formation of precursor–salt adducts as crystalline intermediates, which then react with each other to form the COF.     

Compatibility Studies of Multicomponent Tablet Formulations. DSC and experimental mixture design

An experimental mixture design was applied to a differential scanning calorimetry (DSC) study performed to evaluate naproxen compatibility in tablet formulations consisting of four classic excipients (sorbitol, sodium carboxymethylcellulose, poly(ethylene glycol) 20000 and Veegum) each in adequate concentration ranges accounting for the relevant values actually used in pharmaceutical formulations. Twenty-seven different tablets were obtained from as many mixtures prepared according to the experimental design plan and analyzed in a random order by DSC. Statistical evaluation of experimental data enabled correlation of both enthalpy and onset temperature variations of drug melting endotherm (selected as responses indicative of the presence of drug-excipient interactions) with the mixture composition. Variance analysis (Anova) confirmed the reliability of the postulated polynomial model in providing adequate prediction of true system behaviour. This revised version was published online in August 2006 with corrections to the Cover Date.     

氢气对正丁烷/空气混合物催化着火的热作用和化学作用

通过对正丁烷/氢气/空气混合物在Pt 催化表面的详细反应机理分析, 研究了氢气添加对正丁烷/空气混合物催化着火过程的影响. 研究发现, 在正丁烷/空气混合中添加氢气有助于正丁烷在更低的温度下实现催化着火, 而且不同的氢气添加量对混合物的着火温度和着火过程呈现不同的影响: 当氢气添加量较小时, 氢气的作用主要呈现为热影响; 而当氢气添加量较大时, 氢气的作用主要呈现为化学影响. 这些结果与实验结果是一致的. 本文进一步确定了发挥不同作用的氢气添加量的范围, 并分别对热作用和化学作用情况下的着火启动反应进行了动力学分析.     

甲醇燃料车尾气净化催化剂的研究Ⅰ.甲醇深度氧化用钯催化剂上吸附物种的原位红外研究

利用原位红外技术研究了ＣＨ３ＯＨ、ＣＯ、Ｏ２等在Ｐｄ／γＡｌ２Ｏ３上的吸附情况及ＣＨ３ＯＨ和Ｏ２共吸附时表面物种的变化，结果表明：表面纯净的Ｐｄ／γＡｌ２Ｏ３催化剂对甲醇具有很好的解离吸附性能，在无氧条件下，ＣＨ３ＯＨ可在其上脱氢产生ＨＣＨＯ及ＣＯ。Ｐｄ对Ｏ２的吸附力强，氧均以解离方式吸附于Ｐｄ／γＡｌ２Ｏ３上。当吸附的［ＣＨ３Ｏ］与［Ｏ］在Ｐｄ／γＡｌ２Ｏ３上相互作用时，可产生ＨＣＨＯ、ＣＯ、甲二氧基、甲酸根等中间物种     

Electrodeposition and characterization of Zn–Sn alloy coatings from a deep eutectic solvent based on choline chloride for corrosion protection

With the aim of obtaining high corrosion resistant Zn–Sn alloy coatings from an ionic liquid, the effects of electrodeposition potential and electrolyte composition on the electrodeposition behavior, film composition, morphology and corrosion performance were investigated. Cyclic voltammograms indicate that Zn and Sn were co‐deposited at distinct reduction potentials as pure Zn and Sn elements. In addition, the phase composition analysis also showed that the obtained Zn–Sn alloy deposits (8 wt.%–45 wt.% Zn) consist of a two‐phase mechanical mixture of small aggregates of Zn and Sn metals. The Zn content of the alloy significantly increases as the electrodeposition potential and electrolyte Zn (II)/Sn (II) ratio increase. The corrosion performance study of the obtained Zn–Sn coatings showed that they have a passivation behavior and their corrosion resistance increases as the alloy‐Sn content increases. To improve their morphological properties, ethylene diamine tetraacetic acid additive was introduced into the electrolyte and greatly improved the morphology and corrosion resistance of the deposits. For the first time, it was shown that high corrosion resistance Zn–Sn coatings can be obtained from ionic liquids. Copyright © 2014 John Wiley & Sons, Ltd.     

拟静态法测定混合溶剂的汽化热和汽化熵

讨论了沸点升高法测定混和溶剂化热和汽化熵的原理，并用拟静态法测定了乙醇－丙酮，并－四氯化碳和苯，甲苯三组混和溶剂在不同组成下的正常沸点，根据沸点数据求得了混和泶微分汽化热和汽化熵，实验结果表明，二元混和溶剂与理想溶液偏离不大时，其正常汽化熵符合Ｔｒｏｕｔｏｎ规则。