等离子体聚萘薄膜作发光层的蓝色发光二极管

等离子体聚萘薄膜作发光层的蓝色发光二极管马於光，唐建国，张海峰，沈家骢，刘式墉，刘晓东（吉林大学分子光谱与分子结构开放实验室，集成光电子学国家重点实验室，长春，１３００２３）（白求恩医科大学）关键词等离子体聚合物，蓝光，发光二极管Ｂｕｒｒｏｕｇｈｅｓ...     

Nucleophilic Addition of Thiaproline to Electrochemically Derived o‐Quinone,Application to the Sensitive Voltammetric Detection of Thiaproline

The mechanism of electrochemical behavior of catechol in the presence of thiaproline is investigated by cyclic voltammetry, controlled‐potential coulometry and spectrophotometric tracing of the reaction coordinate. The results indicate that thiaproline participate in with an ECEC mechanism in a nucleophilic (Michael) addition to o‐quinone. Effect of pH of buffer solution on reaction pathway is studied and showed that addition of thiaproline to the o‐quinone is performed only in solutions with pHs higher than 5. These results indicate that the addition of thiaproline is occurred first from amine functional group. In the second step, the addition of carboxylate group of thiaproline to C‐5 of catechol results the final product with a lactone ring in its structure. Observation of two isosbestic point in absorption spectrum during the progress of the electrolysis together with the FT‐IR results for final product can be presented as evidence for two step addition of thiaproline to catechol. Final product, due to the electron donor property of thiaproline, more easily oxidized respect to the former catechol and as a result, a new redox couple is obtained for this compound in lower potentials. The easier anodic oxidation of addition product (relative to catechol) caused to an increase in anodic current for catechol, which is proportional to the thiaproline concentration. The differential pulse voltammetry (DPV) is applied as a sensitive voltammetric method for the detection of thiaproline. A linear range from 5×10^?8 to 5×10^?6 M with a detection limit of 1×10^?8 M is resulted for thiaproline. With respect to the reversibility of the electrochemical reactions in the mechanism, and also more facile oxidation of the addition products, the square‐wave voltammetry is presented as a method with considerably more sensitivity for the detection of sub‐micromolar amounts of thiaproline. The advantageous properties of the voltammetric method for thiaproline detection lie in its excellent catalytic activity, sensitivity and simplicity.     

Size-based analysis of incinerator fly ash using gravitational SPLITT fractionation, sedimentation field-flow fractionation, and inductively coupled plasma-atomic emission spectroscopy

Fly ash has been regarded as hazardous because of its high adsorption of toxic organic and/or inorganic pollutants. Fly ash is also known to have broad distributions of different chemical and physical properties, such as size and density. In this study, fly ash emitted from a solid waste incinerator was pre-fractionated into six sub-populations by use of gravitational SPLITT fractionation (GSF). The GSF fractions were then analyzed by sedimentation field-flow fractionation (SdFFF) and ICP–AES. SdFFF analysis showed the fly ash has a broad size distribution ranging from a few nanometers up to about 50 µm. SdFFF results were confirmed by electron microscopy. Inductively coupled plasma–atomic emission spectroscopy (ICP–AES) analysis of the GSF fractions showed the fly-ash particles contain a variety of inorganic elements including Ca, Si, Mg, Fe, and Pb. The most abundant in fly ash was Ca, followed by Si then Mg. No correlations were found between trace element concentration and particle size.     

Exact rotamer optimization for protein design

Computational methods play a central role in the rational design of novel proteins. The present work describes a new hybrid exact rotamer optimization (HERO) method that builds on previous dead-end elimination algorithms to yield dramatic performance enhancements. Measured on experimentally validated physical models, these improvements make it possible to perform previously intractable designs of entire protein core, surface, or boundary regions. Computational demonstrations include a full core design of the variable domains of the light and heavy chains of catalytic antibody 48G7 FAB with 74 residues and 10(128) conformations, a full core/boundary design of the beta1 domain of protein G with 25 residues and 10(53) conformations, and a full surface design of the beta1 domain of protein G with 27 residues and 10(60) conformations. In addition, a full sequence design of the beta1 domain of protein G is used to demonstrate the strong dependence of algorithm performance on the exact form of the potential function and the fidelity of the rotamer library. These results emphasize that search algorithm performance for protein design can only be meaningfully evaluated on physical models that have been subjected to experimental scrutiny. The new algorithm greatly facilitates ongoing efforts to engineer increasingly complex protein features.     

阿利新蓝的合成

阿利新蓝 (ＡｌｃｉａｎＢｌｕｅ)是一种从植物中提取出的天然物。于 1 944年由Ｈａｄｄｏｃｋ和Ｗｏｏｄ在实验室通过多次实验后所发现。它的水溶液呈天蓝色 ,着色性好而且吸光系数很大。又因它较好的水溶性。所以可以作为高效的生物染色剂[1,2 ] ,用于粘蛋白染色、细菌染色及聚酯、纤维素等人造和天然纤维的染料[3 ] 。基于它的重大应用前景和较高的商业价值 ,探索出一条合理的工业化合成路线就非常重要了。有关阿利新蓝的应用虽然有很多 ,但始终未见合成阿利新蓝的文献报道。在设计它的有机合成时必然涉及酞菁铜 (ＰｃＣｕ)的氯甲基化反…     

Sensitivity in Supramolecular Architectures of Polyaromatic Salts Containing Two Singly‐Pimerized Bipyridines

Three novel supramolecular arrays of zigzag polyaromatic salts are reported. Both the conformation and disposition of the dications are subjected to various noncovalent interactions. Thus, the presence or absence of the π‐π interacting enclathrated molecules, the efficient packing and the involved hydrogen bonding interactions of anions, as well as the increased hydrophobic property of the dications themselves exert influence.     

Resistance to Surfactant and Protein Fouling Effects at Conducting Diamond Electrodes

Boron‐doped diamond thin‐film electrodes display negligible fouling effects in the presence of high levels of surface‐active materials, including proteins. Dramatic improvements in the stability of the analyte response (compared to common glassy carbon and carbon paste electrodes) are illustrated using bovine serum albumin (BSA), gelatin, and Triton X‐100 in connection with repetitive square‐wave voltammetric (SWV) measurements. The voltammetric response of ascorbic acid at the diamond electrode exhibits negligible shifts in peak potentials and minimal depressions of current signals over a wide range of surfactant concentrations (0–750 ppm). For example, the diamond electrode exhibited 70, 50 and 60 mV potential shifts for 10 repetitive voltammetric scans in the presence of 100 ppm BSA, gelatin and Triton X‐100, respectively, compared to 120, 190, and 280 mV shifts observed at the glassy carbon electrode. Furthermore, only 4.3 and 6.2% of the initial current decays were observed in the presence of 100 ppm Triton X‐100 and gelatin, respectively (compared to 45.2 and 34.4% diminutions at the glassy carbon electrode). Such improved performance was also confirmed from the SWV measurements of uric acid, dihydroxyphenylacetic acid, and catechol. The greatly improved resistance to surfactant interference reflects the fact that the as‐grown diamond thin film, composed of oxide‐free and hydrogen‐terminated surface, has a relatively lower surface energy and minimal electrostatic attributes, either specific or general, so that little adsorption of surface‐active agents occurs. The topographic AFM images of the diamond electrode surface confirm a negligible BSA fouling effect after repetitive SWV measurements. Such enhanced antifouling features make diamond electrodes very attractive for numerous real‐life electroanalytical applications.     

A new algorithm to evaluate bielectronic integrals with 1s Slater‐type orbitals obtained by the integral transforms

This article presents a variation of the integral transform method to evaluate multicenter bielectronic integrals (12|34), with 1s Slater‐type orbitals. It is proved that it is possible to define, out of the expression of (12|34) given by the integral transform method, a function F(q) that has the property of having a unique Q, such that F(Q) = (12|34). Therefore, F(q) may be used to calculate (12|34). It is shown that the evaluation of F(Q) turns out to be simpler than the three‐dimensional integral involved in the calculation of (12|34), and an algorithm is presented to calculate Q. The results show that relative errors on the order of 10^?3 or lower are obtained very efficiently. In addition, it is shown that the proposed algorithm is very stable. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Structure determination of homoleptic AuI, AgI, and CuI aryl/alkylethynyl coordination polymers by X-ray powder diffraction

This article describes the structure determination of five homoleptic d(10) metal-aryl/alkylacetylides [RC triple bond CM] (M=Cu, R=tBu 1, nPr 2, Ph 3; R=Ph, M=Ag 4; Au 5) by using X-ray single-crystal and powder diffraction. Complex 1.C6H6 reveals an unusual Cu20 catenane cluster structure that has various types of tBuC triple bond C-->Cu coordination modes. By using this single-crystal structure as a starting model for subsequent Rietveld refinement of X-ray powder diffraction data, the structure of the powder synthesized from CuI and tBuC triple bond CH was found to have the same structure as 1. Complex 2 has an extended sheet structure consisting of discrete zig-zag Cu4 subunits connected through bridging nPrC triple bond C groups. Complex 3 forms an infinite chain structure with extended Cu-Cu ladders (Cu-Cu=2.49(4)-2.83(2) A). The silver(I) congener 4 is iso-structural to 3 (average Ag-Ag distance 3.11 A), whereas the gold(I) analogue 5 forms a Au...Au honeycomb network with PhC triple bond C pillars (Au-Au=2.98(1)-3.26(1) A). Solid-state properties including photoluminescence, nu(C triple bond C) stretching frequencies and thermal stability of these polymeric systems are discussed in the context of the determined structures.     

Simultaneous quantitative analysis of ketanserin and ketanserinol in plasma by RP-HPLC with fluorescence detection

A sensitive and selective high-performance liquid chromatographic assay for the quantification of ketanserin and ketanserinol in human plasma was developed and validated. The procedure involves extraction of ketanserin and ketanserinol from plasma using an Extrelut NT-1 solid-phase extraction column. The chromatograph was equipped with a Hypersil BDS column (100 x 4.5 mm, 3 micro m particle size). Separation was performed with a mixture of acetate buffer 0.01 M, pH 4.9-methanol-acetonitrile (52:40:8, v/v/v). Detection was performed with fluorescence detection (lambda(ex) = 332 nm and lambda(em) = 410 nm). Calibration curves were linear (r(2) = 0.999) in the range 0-400 ng/mL for both ketanserin and ketanserinol. The repeatability coefficient for ketanserin and ketanserinol was 3.1 and 3.0%, respectively. The reproducibility coefficient for ketanserin and ketanserinol was 10.5 and 9.1%, respectively. The limit of quantification for both ketanserin and ketanserinol was 2.0 ng/mL. The mean recovery yield for both ketanserin and ketanserinol was 60%. In an 8 h work day approximately 60 samples, including calibration and reference standards, could be processed.