Effective Methods for the Synthesis of N‐Methyl β‐Amino Acids from All Twenty Common α‐Amino Acids Using 1,3‐Oxazolidin‐5‐ones and 1,3‐Oxazinan‐6‐ones

N‐Methyl β‐amino acids are generally required for application in the synthesis of potentially bioactive modified peptides and other oligomers. Previous work highlighted the reductive cleavage of 1,3‐oxazolidin‐5‐ones to synthesise N‐methyl α‐amino acids. Starting from α‐amino acids, two approaches were used to prepare the corresponding N‐methyl β‐amino acids. First, α‐amino acids were converted to N‐methyl α‐amino acids by the so‐called ‘1,3‐oxazolidin‐5‐one strategy’, and these were then homologated by the Arndt–Eistert procedure to afford N‐protected N‐methyl β‐amino acids derived from the 20 common α‐amino acids. These compounds were prepared in yields of 23–57% (relative to N‐methyl α‐amino acid). In a second approach, twelve N‐protected α‐amino acids could be directly homologated by the Arndt–Eistert procedure, and the resulting β‐amino acids were converted to the 1,3‐oxazinan‐6‐ones in 30–45% yield. Finally, reductive cleavage afforded the desired N‐methyl β‐amino acids in 41–63% yield. One sterically congested β‐amino acid, 3‐methyl‐3‐aminobutanoic acid, did give a high yield (95%) of the 1,3‐oxazinan‐6‐one ( 65 ), and subsequent reductive cleavage gave the corresponding AIBN‐derived N‐methyl β‐amino acid 61 in 71% yield (Scheme 2). Thus, our protocols allow the ready preparation of all N‐methyl β‐amino acids derived from the 20 proteinogenic α‐amino acids.     

High-performance liquid chromatography of some basic drugs on a n-octadecylphosphonic acid modified magnesia-zirconia stationary phase

The high-performance liquid chromatographic behavior of some basic drugs was studied on a n-octadecylphosphonic acid modified magnesia-zirconia (C18PZM) stationary phase. The effect of mobile phase variables such as methanol content, ionic strength, and pH on their chromatographic behavior was investigated. The retention mechanism of basic drugs on the stationary phase was elucidated. The results indicate that both hydrophobic and cation-exchange interactions contribute to solute retention under most chromatographic conditions. The inherent Br?nsted-acid sites and also the adsorbed Lewis base anionic buffer constituents on accessible ZM surface Lewis acid sites play a role in the retention of ionized solutes by cation-exchange interaction. However, especially at high mobile phase pH, the retention of basic drugs depends mainly on hydrophobic interactions between solutes and support. Separations of the basic drugs on the C18PZM phase by a predominantly reversed-phase retention mode were very promising. The mixed-mode retention feature on this phase, as a result of the adsorbed Lewis base anionic buffer constituents acting as sites for cation-exchange, could also be very useful, e.g. for enhancing the chromatographic selectivity of such analytes. The C18PZM seems to be an excellent alternative to silica-based reversed-phase stationary phase for the separation of strongly basic solutes.     

Ritter Reaction of 1‐Aryl‐1‐Fluoro‐2‐Haloethanes

Fluorinated phenethyl bromides 1,2 , and 3 , prove to be totally inert under Ritter reaction conditions in the presence of either SnCl₄ or AgNO₃, due to the strong deactivation by the gem‐difluoro unit. Subjecting 2‐bromo‐1‐fluoro‐1‐phenylethane to SnCl₄ in MeCN at elevated temperatures led to formation of 2‐methyl‐4‐phenyl‐4,5‐dihydrooxazole.     

聚醚桥连二异羟肟酸单核和双核过渡金属配合物催化PNPP水解

Two polyether bridged dihydroxamic acids and their mono-and binuclear manganese(Ⅱ), zinc(Ⅱ) complexes have been synthesized and employed as models to mimic hydrolase in catalytic hydrolysis of p-nitrophenyl picolinate (PNPP). The reaction kinetics and the mechanism of hydrolysis of PNPP have been investigated. The kinetic mathematical model for PNPP cleaved by the complexes has been proposed. The effects of the different central metal ion, mono-and binuclear metal, the pseudo-macrocyclic polyether constructed by polyethoxy group of the complexes, and reactive temperature on the rate for catalytic hydrolysis of PNPP have been examined. The results showed that the transition metal dthydroxamates exhibited high catalytic activity to the hydrolysis of PNPP, the catalytic activity of binuclear complexes was higher than that of mononuclear ones, and the pseudo-macrocyclic polyether might synergetically activate H20 coordinated to metal ion with central metal ion together and promote the catalytic hydrolysis of PNPP.     

Organosulfur compounds: electrophilic reagents in transition-metal-catalyzed carbon-carbon bond-forming reactions

Transition-metal-catalyzed carbon-carbon bond-forming reactions are among the most powerful methods in organic synthesis and play a crucial role in modern materials science and medicinal chemistry. Recent developments in the area of ligands and additives permit the cross-coupling of a large variety of reactants, including inexpensive and readily available sulfonyl chlorides. Their desulfitative carbon-carbon cross-coupling reactions (Negishi, Stille, carbonylative Stille, Suzuki-Miyaura, and Sonogashira-Hagihara-type cross-couplings and Mizoroki-Heck-type arylations) are reviewed together with carbon-carbon cross-coupling reactions with other organosulfur compounds as electrophilic reagents.     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Surface-grafted polystyrene beads with comb-like poly(ethylene glycol) chains: preparation and biological application

We prepared surface-grafted polystyrene (PS) beads with comb-like poly(ethylene glycol) (PEG) chains. To accomplish this, conventional gel-type PS beads (35-75 microm) were treated with ozone gas to introduce hydroperoxide groups onto the surface. Using these hydroperoxide groups, poly(methyl methacrylate) (PMMA, Mn= 22,000-25,000) was grafted onto the surface of the PS beads. The ester groups of the grafted PMMA were reduced to hydroxyl groups with lithium aluminum hydride (LAH). After adding ethylene oxide (EO) to the hydroxyl groups, we obtained the PS-sg-PEG beads, which had a rugged surface and a diameter of 80-150 microm. We could obtain several kinds of the PS-sg-PEG beads by controlling the chain lengths of the grafted PMMA and the molecular weights of the PEG chains. The grafted PEG layer was about 30-50 microm thick, which was verified from the cross-sectioned views of the fluorescamine-labeled beads. These fluorescence images proved that the beads possessed a pellicular structure. Furthermore, we found that the surface-grafted PEG chains had the characteristic property of reducing non-specific protein adsorption on the beads.     

Manipulating the Through‐Space Spin–Spin Interaction of Organic Radicals in the Confined Cavity of a Self‐Assembled Cage

We show a new approach to manipulating the through‐space spin–spin interaction by utilizing the confined cavity of a self‐assembled M₆L₄ coordination cage. The coordination cage readily encapsulates stable organic radicals in solution, which brings the spin centers of the radicals closer to each other. In sharp contrast to the fact that the radical in solution in the absence of the cage is in a doublet state, in the presence of the cage through‐space spin–spin interaction is induced through cage‐encapsulation effects in solution as well as in the solid state, resulting in the triplet state of the complex. These results were confirmed by ESR spectroscopy and X‐ray crystallography. The quantity of triplet species generated by encapsulation in the cage increases with increasing affinity of the radicals to the cage. We estimated the affinity between several types of guests and the cage in solution by cyclic voltammetry. We also demonstrate that the through‐space interaction of organic radicals within the self‐assembled coordination cage can be controlled by external stimuli such as heat or pH.     

The distribution coefficient of oil and curing agent in PP/EPDM TPV

The distribution coefficients of oil and curing agent in PP/EPDM TPV were calculated by measuring the melting point of the PP phase using differential scanning calorimetry (DSC). The PP/EPDM TPV was prepared by using a twin screw extruder and a peroxide curing agent was used. The peroxide induces the degradation of PP, resulting in the decrease of T_m. The oil in PP phase also decreases the Tm. Based on the T_m difference among pure PP and PP/EPDM TPV before and after extraction by cylcohexane, the calculated oil distribution coefficient is 0.537. The addition sequence of PP, oil, and curing agent has a significant effect on the T_m and the calculated curing agent distribution coefficient is 0.52. Both of the coefficients are less than 1. Based on the calculation of the two coefficients, a rationale design of thermoplastic vulcanizate (TPV) can be made by proper control of raw materials, addition sequence, and processing parameters. Copyright © 2007 John Wiley & Sons, Ltd.