反式环己烷羧酸衍生物的合成

低档液晶显示中所用的液晶材料,如联苯氰类、酯类等,具有高的粘度,低的清亮点及低的光化学、化学稳定性等缺点．随着液晶显示技术的发展,对高档液晶材料的要求越来越迫切．为了降低液晶材料的粘度指数,改造液晶分子的方法之一是用环己烷环代替分子中的苯环［１］．因...     

氧气催化氧化环己烷

本文系统综述了O₂氧化剂用于环己烷催化氧化体系的研究进展,包括金属配合物催化、金属纳米粒子催化、金属氧化物粒子催化、分子筛催化、碳材料催化、光促进催化、杂多酸催化、金属-有机骨架材料催化等。本文认为研究、开发以O₂为氧化剂,高活性高选择性的非均相环己烷催化氧化体系将成为今后环己烷催化氧化研究的主要方向,尤其是多金属甚至多元素复合体系。本综述不仅对开发高催化活性高选择性的环己烷催化氧化体系,改进目前工业上的环己醇环己酮制备工艺具有重要的参考价值,而且还对其他烃类C-H键和C-C键高效催化氧化体系甚至其他氧化体系的研究与开发也具有重要的参考价值。     

Syntheses and properties of organosoluble poly(ether imide)s from 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride and aromatic diamines

A bis(ether anhydride) monomer, 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride ( IV‐A ), was synthesized from the nitro displacement of 4‐nitrophthalodinitrile by the phenoxide ion of 1,1‐bis(4‐hydroxyphenyl)cyclohexane ( I‐A ), followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and dehydration of the resulting bis(ether acid). A novel series of organosoluble poly(ether imide)s ( VI _a–i )(PEIs) bearing cyclohexylidene cardo groups was prepared from the bis(ether anhydride) IV‐A with various aromatic diamines V _a–i via a conventional two‐stage process. The PEIs had inherent viscosities in the range of 0.48–1.02 dL/g and afforded flexible and tough films by solution‐casting because of their good solubilities in organic solvents. Most PEIs showed yield points in the range of 89–102 MPa at stress‐strain curves and had tensile strengths of 78–103 MPa, elongations at breaks of 8–62%, and initial moduli of 1.8–2.2 GPa. The glass‐transition temperatures (T_g's) of these PEIs were recorded between 200–234 °C. Decomposition temperatures of 10% weight loss all occurred above 490 °C in both air and nitrogen atmospheres, and their residues were more than 43% at 800 °C in nitrogen atmosphere. The cyclohexane cardo‐based PEIs exhibited relatively higher T_g's, better solubilities in organic solvents, and better tensile properties as compared with the corresponding Ultem® PEI system. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 788–799, 2001     

Oxidative transformations of cyclohexane,methylcyclopentane, and pentane on treatment with superelectrophiles based on polyhalomethane and aluminum halides

Cyclohexane and methylcyclopentane dimerize into dimethyldecalins on treatment with superelectrophilic systems containing polyhalomethanes (CBr₄, CCl₄, CHCl₃) and aluminum halides (AlBr₃, AlCl₃). At 20 °C, the yields of C₁₂H₂₂ hydrocarbons reach 140 mol.% based on the superelectrophile. Under the action of CBr₄·2AlBr₃ at 20 °C in CH₂Br₂ or without a solvent, n-pentane is converted predominantly into lower alkanes (mainly, isopentane). In addition, higher branched C₈--C₁₂ alkanes, small amounts of alkylated cyclohexanes, cycloalkenes, dienes, and alkylbenzenes are formed in a total yield of 20--23 % (w/w) based on pentane.     

Permeation and separation characteristics for benzene/cyclohexane mixtures through tosylcellulose membranes in pervaporation

Tosylcelluloses (TosCells) with different degrees of tosylation were synthesized as membrane materials for the separation of benzene/cyclohexane (Bz/Chx) mixtures. TosCell membranes showed a high benzenepermselectivity for the Bz/Chx mixtures in pervaporation (PV). An increase in the benzene concentration in the feed mixtures increased permeation rate but decreased the benzenepermselectivity of the TosCell membranes. The increase in the permeation rate was attributed to the increase of the degree of swelling of the TosCell membranes by the feed mixtures and the decrease in the benzenepermselectivity was mainly caused by the decrease of sorption selectivity. With low benzene concentrations in the Bz/Chx mixtures, the permeation rate of a TosCell membrane with a higher degree of tosylation was greater than that with a lower degree of tosylation, but was vice versa with a high benzene concentration. The benzenepermselectivity of the former TosCell membrane was higher than that of the latter membrane. Differences of the permeation rate and benzenepermselectivity with changes in the benzene concentration in the feed mixture and degree of tosylation of the TosCell membrane were significantly influenced by the degree of swelling of the TosCell membrane and the benzene concentration sorbed into the TosCell membrane. Mechanism of separation for the Bz/Chx mixtures through the TosCell membranes is discussed by the solution–diffusion model.     

高聚物负载卟啉铁的合成及其催化环己烷氧化反应研究

在制备单氨基取代卟啉铁Fe(ATPP)Cl的基础上,以具有良好成膜特性的丙烯腈/丙烯酸共聚物为载体,通过氨基与羧基的缩合,得到新型的高聚物负载卟啉铁(Poly-Fe(ATPP)Cl).以分子氧-抗坏血酸-Poly-Fe(ATPP)Cl作为细胞色素P-450的氧化模拟体系,研究了其对环己烷在常温常压下温和氧化的催化性能,并考察反应时间、还原剂用量、轴向配体以及催化剂的回收利用等因素的影响.     

Influence of the spatial position of a trifluoromethyl group on the 13C chemical shifts in the cyclohexane series

The influence of the introduction of a trifluoromethyl group on the 13C chemical shifts in cyclohexane was examined. The two main effects observed are located at the alpha and gamma positions relative to the carbon bearing the fluorine atoms. By comparison of the collected data it was possible to calculate the increments corresponding to the substitution of a hydrogen atom by a CF3 group at axial or equatorial positions on the cyclohexane ring.