基于变压红外光谱研究离子液体[MPIM][I]与石墨烯氧化物之间的相互作用

本研究利用红外光谱研究不同压力下离子液体1-Methy1-3-propylimidazolium iodide([MPIM][I])与石墨烯及其氧化物的相互作用.结果表明,[MPIM][I]对压力的变化具有高敏感度,咪唑环与烷基链在0.4 GPa时产生相变化,可明显观察到吸收峰的裂解,且连续加压会导致咪唑环与烷基链的振动频率蓝移.[MPIM][I]与石墨烯作用时加压至2.5 GPa也未观测到相变化的产生,且咪唑环与烷基链的振动频率蓝移趋势也不明显;[MPIM][I]与石墨烯氧化物作用时咪唑环与烷基链的结果与添加石墨烯时几乎相同.石墨烯氧化物具有羟基、羧基、环氧基等共价键结在其表面,这些羟基会扰动[MPIM][I]中的咪唑环与烷基链,导致在常压下振动频率发生蓝移,进而表明石墨烯表面的官能基团会与离子液体产生相互作用.     

紫外光电材料ZnO的反应溅射制备及研究

采用直流反应溅射法分别在Si(111),Si(001),及K4玻璃衬底上制备ZnO薄膜,研究了氧氩比、衬底温度以及退火处理对于晶体结晶质量的影响,发现生长过程中的退火处理提高了薄膜质量和晶面取向.通过优化生长条件,在衬底温度为350℃,氧氩比为1:2的条件下生长出了XRD半高宽为01°、C轴取向高度一致的ZnO薄膜.     

氧化镓的同步辐射研究

 利用金刚石对顶砧（DAC）高压装置产生高压，使用体积比为16∶3∶1的甲醇、乙醇和水混合液作为传压介质，通过原位高压同步辐射技术对氧化镓的高压行为进行了研究（0～42.5 GPa）。实验发现在室温下13.3 GPa压力附近，单斜结构的氧化镓发生了结构相变，变成三角结构。相变后镓离子由原来同时位于由氧离子围成的四面体和八面体的中心位置变成只位于八面体的中心位置。卸压后的X射线衍射谱表明，氧化镓又恢复为单斜结构，该相变为可逆相变。     

MgO在Mg-hBN体系中对合成cBN晶体的影响

 以金属镁粉为触媒，以六角氮化硼为原料，其中加入适量比例的氧化镁，在国产六面顶压机上，在约5.0 GPa压力、1 500～1 800 K温度条件下，合成出了颜色均匀、晶形完整的黄色立方氮化硼单晶体。实验结果表明，在Mg-hBN体系中，氧化镁对合成cBN晶体的颜色及合成温度有很大的影响。     

一种非连续纳米氧化层自旋阀的显微结构研究

利用高分辨电子显微学方法(HREM)研究了纳米氧化层镜面反射自旋阀多层结构Ta(35nm)Ni80Fe20(2nm)Ir17Mn83(6nm)Co90Fe10(15nm)NOL1Co90Fe10(2nm)Cu(22nm)Co90Fe10(15nm)NOL2Ta(3nm).该自旋阀的巨磁电阻(GMR)效应高达15%,较无此镜面反射纳米氧化层(NOL)的自旋阀提高近1倍,同时交换偏置场亦有所增强.高分辨显微结构分析表明,介于钉扎层与被钉扎层之间的氧化层(NOL1)并未完全氧化,即除氧化过程生成的CoFe氧化物 关键词： 自旋阀 纳米氧化层 高分辨电子显微学 巨磁电阻效应     

Luminescence properties of green emission of SiO2/Zn2SiO4:Mn nanocomposite prepared by sol–gel method

Green light emitting Mn²⁺ doped Zn₂SiO₄ particles embedded in SiO₂ host matrix were synthesized by a sol–gel method. After the incorporation of ZnO:Mn nanoparticles in a silica monolith using sol–gel method with supercritical drying of ethyl alcohol in two steps, it was heat treated in air at 1200 °C for 2 h in order to obtain the SiO₂/α-Zn₂SiO₄:Mn nanocomposites. The microstructure of phosphor crystals was characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). XRD results indicate that the pure phase α-Zn₂SiO₄ with rhombohedral structure was obtained after thermal treatment at 1200 °C. The SiO₂/α-Zn₂SiO₄:Mn nanocomposites with a Mn doping concentration of 1.5 at% exhibit two broadband emissions in the visible range: a strong green emission at around 525 nm and a second one in the range between 560 and 608 nm. This nanocomposite with a Mn doping concentration of 0.05 shows the highest relative emission intensity. Upon 255 nm excitation, the luminescence decay time of the green emission of Zn₂SiO₄:Mn around 525 nm is 11 ms. The luminescence spectra at 525 nm (⁴T₁–⁶A₁) and lifetime of the excited state of Mn²⁺ ions-doped Zn₂SiO₄ nanocrystals are investigated.     

Vibrational Structure of the B—X System of Isotopic Ago Molecules

Spectra of ¹⁰⁷Ag¹⁸O and ¹⁰⁷Ag¹⁶O molecules have been obtained in a low-pressure arc in oxygen atmosphere, and recorded with medium dispersion. Vibrational assignments for the bands of B ²π —X²π system were verified by the study of the oxygen isotope effect, and the vibrational constants were obtained for the states involved in transitions.     

氧化亚氮3000—0200和1001—0110跃迁带在高温下的线强度

采用乘积近似法计算了氧化亚氮分子的总配分函数，其中转动配分函数考虑了离心扭曲修正，振动配分函数采用谐振子近似. 利用计算所得的配分函数和实验振动跃迁矩平方及Herman-Wallis因子系数，计算了氧化亚氮3000—0200和1001—0110跃迁带在常温和高温下的线强度. 结果显示，当温度高达3000K时，计算所得线强度与实验值及HITRAN数据库提供的结果仍符合较好. 这表明高温下的分子配分函数和线强度的计算是可靠的. 还进一步计算了氧化亚氮3000—0200和1001—0110跃迁带在更高温度(40 关键词： 氧化亚氮 配分函数 线强度 高温     

三维多孔花状ZnO微纳结构的合成及光催化性能

采用电沉积及后续的热处理技术,在Ti衬底上合成了一种三维多孔花状ZnO微纳结构薄膜. 这种ZnO结构是由包含大量纳米颗粒和孔洞的纳米薄片组成,纳米颗粒的大小可以通过调节电沉积时间和煅烧温度控制. 光催化性能的测试表明这种多孔ZnO薄膜是一种理想的光催化剂.     

Characterization and chemical behavior of submonolayer coverages of titania on a Pt foil

The interaction between submonolayer titania coverages and Pt foil has been studied by Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). The submonolayer titania can be fully oxidized to TiO₂ at 923 K under 10⁻⁸ Torr O₂, and partially oxidized to TiO_x at lower oxidation temperatures. The oxidized surface can be reduced by annealing to 1000 K or higher, or by heating in H₂ at 823 K, or by interacting with surface carbon formed from acetone decomposition. Under certain conditions (e.g., hydrogen reduction at 923 K), the surface titania can be fully reduced to metallic Ti which diffuses into bulk Pt readily. The reduced metallic Ti can resurface when the surface is oxidized at 923 K. Both XPS and HREELS data indicate the existence of subsurface oxygen, which plays an important role for the diffusion of Ti into and out of the Pt foil. Although no special interfacial active sites were revealed by HREELS studies of adsorbed acetone and CO, some TPD and XPS data suggest the presence of sites active for acetone decomposition.