Influence of Bovine Bone Content on In Vitro Degradation of Poly-L-lactic Acid and Bovine Bone Composite Materials

In vitro degradation experiments of poly-L-lactic acid (PLLA) and bovine bone (BB) composites were carried out in a phosphate-buffered solution (PBS) at 37°C with a pH of 7.4. The influence of BB content on pH value of PBS, water uptake, molecular weights, molecular weight distributions, weight losses, mechanical strengths, and morphologies of PLLA/BB was investigated with degradation times. The results indicated that the presence of the BB modified the degradation of the PLLA matrix. The degradation rate of PLLA in the PLLA/BB composite was slower than the degradation rate of the sole PLLA material. Furthermore, the degradation rate of the composites became slower with the increasing content of BB in PLLA/BB composites.     

Structural and Tribological Properties of Polytetrafluoroethylene Composites Filled with Glass Fiber and Al2O3 in Atomic Oxygen Environment

Effects of atomic oxygen (AO) irradiation on the structural and tribological behaviors of polytetrafluoroethylene (PTFE) composites filled with both glass fibers and Al₂O₃ were investigated in a ground-based simulation facility, in which the average energy of AO was about 5 eV and the flux was 5.0 × 10¹⁵/cm² s. It was found that AO irradiation first induced the degradation of PTFE molecular chains on the sample surface, and then resulted in a change of surface morphology. The addition of Al₂O₃ filler significantly increased the AO resistance property of PTFE composites. Friction and wear tests indicated that AO irradiation affected the wear rate and increased the friction coefficient of specimens. The PTFE composite containing 10% Al₂O₃ exhibit the best AO resistance and lower wear rate after long time AO irradiation.     

Preparation and Flammability of a Flame-Retardant Poly(Butyl Acrylate-Vinyl Acetate) System Based on Gemin-Surfactant Modified Montmorillonite and Ammonium Polyphosphate

Gemin-surfactant modified montmorillonite (G-MMT) was successfully prepared by an ion exchange reaction and characterized via Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The P(BA-VAc)/G-MMT emulsion was prepared via an in-situ polymerization method using potassium persulfate (K₂S₂O₈, KPS) as an initiator. Ammonium polyphosphate (APP) was introduced for obtaining P(BA-VAc)/APP/G-MMT flame-retardant latex with a constant total content of 15 wt% of APP and G-MMT in P(BA-VAc). The flame retardancy and thermal behavior of the latex films were investigated by limiting oxygen index (LOI), vertical burning test (UL-94) and thermal gravimetric analysis (TG/DTA). Compared with the P(BA-VAc)/APP composite, the LOI value of P(BA-VAc)/APP/G-MMT containing 0.5 wt% G-MMT at the same total additive loading increased to 29.1 from 20.0 and its UL-94 increased from no rating to V-0. Thermal gravimetric (TG) data showed that the amount of residues increased significantly with the loading of G-MMT. In addition, the LOI values increased with the increase in char residues. The morphology and microstructure of the residues generated during LOI testing were investigated by scanning electron microscopy (SEM). The outer surfaces of P(BA-VAc)/APP/G-MMT charred layers were more continuous and compact than those of P(BA-VAc)/APP.     

Eu-doped ZnO nanoparticles: Sonochemical synthesis,characterization, and sonocatalytic application

Undoped and europium (III)-doped ZnO nanoparticles were prepared by a sonochemical method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analysis. The crystalline sizes of undoped and 3% Eu-doped ZnO were found to be 16.04 and 8.22 nm, respectively. The particle size of Eu-doped ZnO nanoparticles was much smaller than that of pure ZnO. The synthesized nanocatalysts were used for the sonocatalytic degradation of Acid Red 17. Among the Eu-doped ZnO catalysts, 3% Eu-doped ZnO nanoparticles showed the highest sonocatalytic activity. The effects of various parameters such as catalyst loading, initial dye concentration, pH, ultrasonic power, the effect of oxidizing agents, and the presence of anions were investigated. The produced intermediates of the sonocatalytic process were monitored by GC–Mass (GC–MS) spectrometry.     

大规模合成具有氧空位的多孔Bi2O3用于有效降解亚甲基蓝

光催化降解有机污染物由于其具有低能耗和绿色环保的特点,已经成为研究的热点. 氧化铋纳米晶体的带隙在2.0∽2.8 eV之间,利用它催化可见光降解有机污染物具有较高的活性,从而引起了越来越多的关注. 尽管近年来已经开发了几种制备Bi₂O₃基半导体材料的方法,但是仍然难以用简单的方法大规模地制备高活性的Bi₂O₃催化剂. 因此,开发简单可行的大规模制备Bi₂O₃纳米晶体的方法对于工业废水处理的潜在应用具有重要意义. 本文通过蚀刻商用BiSn粉末,然后进行热处理,成功地大规模制备了多孔Bi₂O₃. 获得的多孔Bi₂O₃在亚甲基蓝(MB)的光催化降解中表现出优异的活性和稳定性. 对该机理的进一步研究表明,多孔Bi₂O₃合适的能带结构允许生成活性氧物种,例如O₂^-·和·OH,可有效降解MB.     

A model for crack formation during active solid pyrolysis of a char-forming solid: crack patterns; surface area generation; volatile mass efflux

A model is developed for the formation and propagation of cracks in a material sample that is heated at its top surface, pyrolyses, and then thermally degrades to form char. In this work the sample is heated uniformly over its entire top surface by a hypothetical flame (a heat source). The pyrolysis mechanism is described by a one-step overall reaction that is dependent nonlinearly on the temperature (Arrhenius form). Stresses develop in response to the thermal degradation of the material by means of a shrinkage strain caused by local mass loss during pyrolysis. When the principal stress exceeds a prescribed threshold value, the material forms a local crack. Cracks are found to generally originate at the surface in response to heating, but occasionally they form in the bulk, away from ever-changing material boundaries. The resulting cracks evolve and form patterns whose characteristics are described. Quantities examined in detail are: the crack spacing in the pyrolysis zone; the crack length evolution; the formation and nature of crack loops which are defined as individual cracks that have joined to form loops that are disconnected from the remaining material; the formation of enhanced pyrolysis area; and the impact of all of the former quantities on mass flux. It is determined that the mass flux from the sample can be greatly enhanced over its nominal (non-cracking) counterpart. The mass efflux profile qualitatively resembles those observed in Cone Calorimeter tests.     

Rheological properties of liver actin solutions

G-actin prepared from pork liver and purified to give a product of 95–98% purity was polymerized to F-actin in a rotational dynamic viscometer. The rheological properties were investigated during the course of polymerisation and after polymerisation. G andG measured at frequencies around 0.1 Hz increased strongly during the first 3 hours of the reaction and then slowly approached a constant value in the range of 10–50 mPa. The rise during polymerisation was more than two orders of magnitude. When a solution of F-actin was subjected to steady shear at a high shear rate for a short period of time and subsequently dynamic measurements were performed, then a considerably smallerG (about 70% smaller) was observed immediately after cessation of the steady shear.G then increased with time and approached its initial value.When measuring the viscosity of F-actin solutions as a function of shear rate, a strong shear thinning effect was seen which did not vanish even at shear rates as low as 0.001 s^–1. Even at this low shear rates, a pronounced yield maximum was observed before reaching the steady state. Oscillatory experiments showed a remarkably weak frequency dependence ofG. The results imply that F-actin solutions are largely structured forming a weak temporary network which can be easily destroyed by application of high shear rates. It seems most likely that the destruction occurs by a reversible, shear induced depolymerisation process.     

Evaluation of negative bias temperature instability in ultra-thin gate oxide pMOSFETs using a new on-line PDO method

A new on-line methodology is used to characterize the negative bias temperature instability (NBTI) without inherent recovery. Saturation drain voltage shift and mobility shift are extracted by I_D-V_D characterizations, which were measured before stress, and after every certain stress phase, using the proportional differential operator (PDO) method. The new on-line methodology avoids the mobility linearity assumption as compared with the previous on-the-fly method. It is found that both reaction--diffusion and charge-injection processes are important in NBTI effect under either DC or AC stress. A similar activation energy, 0.15 eV, occurred in both DC and AC NBTI processes. Also degradation rate factor is independent of temperature below 90\du\ and sharply increases above it. The frequency dependence of NBTI degradation shows that NBTI degradation is independent of frequencies. The carrier tunnelling and reaction--diffusion mechanisms exist simultaneously in NBTI degradation of sub-micron pMOSFETs, and the carrier tunnelling dominates the earlier NBTI stage and the reaction--diffusion mechanism follows when the generation rate of traps caused by carrier tunnelling reaches its maximum.     

CdS/TiO2/漂珠复合光催化剂制备及其降解高效氯氰菊酯研究

采用溶胶-凝胶-浸渍法制备了Cds/TiO2/漂珠复合光催化剂,通过SEM,XRD对其结构进行了表征.以高效氯氰菊酯(BEC)杀虫剂的光催化降解为模型反应,研究了CdS/TiO2/漂珠的光催化性能,探讨了影响催化剂活性的因素及采用太阳光作光源处理BEC的可行性.结果表明,CdS/TiO2/漂珠投加量为3 000mg·L-1,初始浓度为45 mg·L-1、初始pH为6.5,通气量为200 mL·min-1时间为60 min,BEC降解率分别为92.1%(125W高压汞灯)和79.3%(5 W紫外灯),采用太阳光照射300 min,BEC降解率可达93.4%.BEC的降解反应遵从L-H动力学模型,测得反应速率常数9.80 mg·(L·min)-1,吸附常数4.36×10-3 L·mg-1.