Light emission from nanocrystalline silicon clusters embedded in silicon dioxide: Role of the suboxide states

Silicon clusters embedded in a silicon dioxide matrix were prepared by ultrasound-assisted implantation resulting in a modified concentration of suboxide states as revealed by high-resolution photoelectron spectroscopy. It is suggested that ultrasound treatment results in formation of different interface structure between silicon cluster and silicon dioxide matrix which is characterized by a distinctly reduced concentration of the suboxide states. It is observed that photoluminescence properties are strongly correlated with the concentration of the suboxide states thereby providing an evidence that besides a quantum confinement effect a closer look at the chemical composition of the nc-Si/SiO₂ system is important.     

One-dimensional photonic crystal design

In this article we present a method to determine the band spectrum, band gaps, and discrete energy levels, of a one-dimensional photonic crystal with localized impurities. For one-dimensional crystals with piecewise constant refractive indices we develop an algorithm to recover the refractive index distribution from the period map. Finally, we derive the relationship between the period map and the scattering matrix containing the information on the localized modes.     

XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier on nanofiller dispersion and strain‐induced crystallization

In elastomer/organo clay nanocomposites, the morphological characteristics, and hence the mechanical properties, of the vulcanizates are strongly influenced by the organic modifier and the vulcanization process. When the elastomer itself undergoes strain‐induced crystallization, both the organic modifier and the dispersed filler particles could significantly influence the crystallization process. These phenomena are very common in case of natural rubber‐based vulcanizates. In this study, the similar effects have been demonstrated with carboxylated nitrile rubber (XNBR) and organically modified layered double hydroxide (O‐LDH)‐based nanocomposites. The effect of size of the organic modifier was obviously visible on the interlayer distance of O‐LDH and also on the morphological reorganization of the dispersed O‐LDH particles during vulcanization process. The strain‐induced crystallization of the XNBR was found to be strongly dependent on the morphological change that occurs during vulcanization process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Transfer matrix for the open chain from giant gravitons

We construct the transfer matrix for the open chain with the centrally extended SU(2|2) symmetry attached to the so called Z=0 giant graviton brane. Using the reflection equations, unitarity property and crossing property, we show that this model is integrable.     

A Multistep Enzyme Sensor for Sucrose Based on S-Layer Microparticles As Immobilization Matrix

Abstract

In this paper we report on the construction principle and performance of an amperometric 3-enzyme sensor for sucrose based on crystalline bacterial cell surface layers (S-layers) as immobilization matrix for the biological components.

Isoporous, crystalline surface layers (S-layers) have been identified as outermost cell envelope layer in many bacteria. Since they are composed of identical protein or glycoprotein subunits with functional groups in well defined positions and orientations, they represent ideal matrices for the controlled and reproducible immobilization of functional macromolecules, as required for the development of biosensors. Apart from single enzyme sensors, which were described earlier, a strikingly simple method for the assembly and optimization of multistep systems was developed. For the fabrication of an amperometric sucrose sensor invertase, mutarotase and glucose oxidase were individually immobilized on S-layer fragments isolated from Clostridium thermohydrosulfuricum L111-69 via aspartic acid as spacer molecules. Subsequently, appropriate mixtures of enzyme loaded S-layer fragments were deposited on a microfiltration membrane and finally, the composite multifunctional sensing layer was sputtered with gold in order to establish a good metal contact. Amperometric sucrose measurements based on H₂O₂ oxidation revealed a high signal level (1 μA^?1/cm^2?mmol sucrose), 5 min response time and a linear range up to 30 mM sucrose as the main characteristics of the S-layer sucrose sensor.     

Determination of Cadmium and Lead in Sea Water after Extraction Using Electrothermal Atomisation. Minimisation of Interferences from Co-Extracted Sea Salts

Abstract

Interferences from small amounts of sea salt in the determination of cadmium and lead were investigated. Test samples were made to mimic solutions obtained after extraction of sea water for trace metal analysis. Sea salt concentrations in the range 0–400 mg/l were investigated. Background absorption from this salt was high but easily minimised through the addition of nitric acid (2 % v/v). Sensitivity reductions due to the salt were considerable and varied from one graphite tube to the other. This problem was overcome by the addition of 1000 mg lanthanum per litre of sample. The positive effect of the lanthanum matrix modification is thought to be due to a change of the graphite tube surface.     

Feedback control design for Rössler and Chen chaotic systems anti-synchronization

The proposed anti-synchronization conditions of coupled chaotic systems are based, in this Letter, on the use of aggregation techniques for the stability study of the error dynamics. The schemes are, successfully, applied to coupled Rössler and Chen chaotic systems making the instantaneous characteristic matrix under the arrow form. Numerical simulations are performed to illustrate the efficiency of the proposed approach.     

Cold crystallization behavior of polyamide 6 in PS‐g‐PA6 graft copolymers

TEM micrographs show that the PA grafts of PS‐g‐PA6 graft copolymers, which are obtained directly by extracting homo‐PA6 out from the homo‐PA6/PS‐g‐PA6 blends, are in the form of wormlike structure. The wormlike PA6 domains can shrink into droplets after annealing at 250 °C for 15 min. The diameter of the droplet determined by TEM and SAXS is in the range of 50–60 nm. This article reports on a unique crystallization behavior of the PA6 grafts in PS‐g‐PA6 graft copolymers. In a DSC cooling scan, PA6 grafts do not crystallize from the melt with a cooling rate of 10 °C/min. However, there is a cold crystallization peak around 65 °C in the subsequent heating scan. This cold crystallization phenomenon, which has not yet been reported in the literature till now, follows well the homogeneous nucleation mechanism and is depressed at relatively slow cooling rates (2 °C/min) or even completely eliminated after annealing within a specific temperature range. It may be caused by the slow diffusion or transport rate of the less flexible PA6 grafts to the crystal fronts when crystallization takes place around its glass transition temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 65–73, 2010