WHOLLY-AROMATIC THERMOTROPIC LIQUID CRYSTALLINE POLYMER AND ITS BLOCK COPOLYMER

A wholly-aromatic thermotropic liquid crystalline polymer (WATLCP) composed ofp-hydroxybenzoic acid (HBA), 4,4'-dihydroxy bisphenyl (BP), terephthalic acid (TPA),m-phthalic acid (MPA) was synthesized. It was symbolized by BP-LCP. Using a simi-lar method, a new copolymer BP-PSF was prepared. BP-PSF has a semi-flexible chainpolysulfone and a rigid-rod chain like BP-LCP. By FT-IR, polarizing microscope and DSCtechnique, the structures and properties of BP-LCP and BP-PSF were studied.     

热致液晶共聚酯对聚丙烯结晶的诱导作用

用差示扫描量热法和光学解偏振法研究了热致液晶性芳香共聚酯与聚丙烯共混物的等温和非多温结晶行为.结果表明,这一热致液晶聚合物对聚丙烯结晶有诱导成核和加速作用.当共聚酯含量在2-5％之间时,聚丙烯的结晶速率最快.偏光显微镜的观察揭示出在聚丙烯熔体中原位形成的液晶聚合物微纤诱导了聚丙烯横穿晶的形成.     

三元无规芳—脂族聚酯酰胺的热致液晶行为

采用低湿溶液缩聚的方法合成了对苯二甲酰氯，二甲基联苯胺和己二醇为单体的芳酯族液晶聚酯酰胺。用ＤＳＣ，Ｘ光衍射分析和偏光显微镜等手段研究了该系列聚酯酰胺的热致液晶行为，确认了二甲基联苯胺单体用量在２０％（ｍｏｌ）的情况下，所得聚酯酰胺仍为向列型液晶聚合物。由于聚酯酰胺分子间聚酰胺链段之间的氢键作用，随着二甲基联苯胺用量增加至６０ｍｏｌ％时，所得的聚酯酰胺己无液晶转变温度，其液晶区间即从熔融温度直至分     

Thermal analysis of Vectran® fibers and films

Vectra^® liquid crystalline polymers (LCP's) were introduced as commercial products in the mid-1980's. The first of these (Vectra A130) was a wholly aromatic thermotropic copolyester ofp-hydroxybenzoic acid and 6-hydroxy-2-naphthoic acid. Vectra A130 is a thermotropic LCP that can be melt spun into filaments that on heat treatment are characterized by high strength and high modulus. Vectra resin can also be extruded into films. In the fiber or film form this material is commercially known as Vectran^®. Heat treatment enhances the tensile strength of Vectran fiber variants. Because of this, the elucidation of the physical transformations taking place in the internal structure of the material during heating has always been an important subject. Several thermal techniques are used to indicate clearly that what is observed as a glass transition is unlike the conventional glass transition in typical semicrystalline polymers. There is also an indication of the presence of multiple states of mesophase aggregation that collapse into a single state when taken to high enough temperatures.     

Synthesis of novel tri-podal mesogenic alkenes and side-chain polysiloxanes

Low molecular weight tri-podal biphenyl- and benzoate-type mesogens [C₆H₅C₆H₄O(CH₂)₅SiMe₂CH₂CH₂SiMe₂]₃CH (4), [C₁₁H₂₃O(C₆H₄)₂O(CH₂)₅SiMe₂]₃CH (5) and [MeOC₆H₄OC(O)C₆H₄O(CH₂)₅SiMe₂]₃CH (6) (C₆H₄ = 1,4-phenylene) were obtained, from branched silyl substituted methane precursors [CH₂CH(Me)₂Si]₃CH (1) and (HMe₂Si)₃CH (2). The biphenyl-containing ones (4) and (5) were converted into terminal alkenes, which were subsequently hydrosilylated with poly(methylsiloxanes). The polymer derived from (5) exhibited mesomorphic properties. Such systems have the potential to significantly increase the density of liquid crystal rod-like structures in side chains of linear polymers (or dendritic liquid crystal polymers).     

PREPARATION AND CHARACTERIZATION OF SHISH-KEBAB TYPE LIQUID CRYSTALLINE POLY（p-PHENYLENEVINYLENE）

Novel shish-kebab type liquid crystalline poly（p-phenylenevinylene） derivatives were synthesized by Stille coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer l） and 1,2-bis（tributylstannyl） ethylene （monomer 2）. The polymers with alkoxy groups are soluble in common organic solvents and exhibit blue fluorescence. Both the cast film and the annealed film have large red-shifts in fluorescence spectra and show yellow fluorescence. The polymers with CN and NO2 groups show poor solubility and green fluorescence. All the polymers possess liquid crystalline smectic phases. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The polymers are easily aligned under a magnetic field of 10 Tesla. It is found that the conjugated backbone and LC side chain are aligned perpendicular and parallel to the magnetic field, respectively. The polymers show optical dichroism in fluorescence spectra, suggesting that they are available for advance materials with linear optical polarization.     

Liquid crystalline ionomers. II. Main chain liquid crystalline polymers with terminal sulfonate groups

Liquid crystalline ionomers containing sulfonate groups on the terminal unit of the chain were synthesized by an interfacial condensation reaction of 4,4′-dihydroxy-α,α′-dimethyl benzalazine, the monofunctional dye fast yellow (FY), and a 50/50 mixture of sebacoyl and dodecanedioyl dichlorides. The weight-average molecular weights were estimated from inherent viscosity measurements to be between 6000–11,000 and the sodium sulfonate concentrations ranged from 0–18.4 meq/100 g polymer. Elemental analyses, however, indicated much higher molecular weights, which suggested that there was a distribution of chains with one, two, or no FY endgroups. The polymers were semicrystalline and melted at ca. 140°C to form nematic mesophases that were stable over a temperature range of ca. 80°C. They were thermally stable to about 350°C. The ionomeric nature of the polymers was confirmed by the presence of intermolecular associations in nonpolar solvents, as demonstrated by dilute solution viscosity measurements.     

聚偏氟乙烯取向薄膜的结晶形态

本文用小角激光散射法研究了聚偏氟乙烯薄膜在拉伸取向过程中晶体形态及结构的变化。拉伸使球晶形变为椭球,同时伴随着局部熔融与重结晶过程,散射图案由原来的四叶瓣发展为八叶瓣。红外测量及X-射线衍射分析表明,拉伸引起分子链构象改变,使晶型发生了转变。     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

加氢脱氮催化剂中硫化钼结构的表征

众所周知,重油加氢脱氮(HDN)所用Mo-Ni/Al2O3催化剂需经预硫化后始有显著的活性,关于硫化的条件工业上已较成熟,但在持续反应过程中硫化催化剂的结构与活性间的关系则很复杂,如硫化钼的价态和结构、金属组分和担体间的相互作用、反应条件及原料对催化剂组分的影响,以及硫化态催化剂中MoS2结晶的形貌等都可以引起催化剂活性本质的变化.