Electro-optic polymer assisted optical switch based on silicon slot structure

One kind of electro-optic polymer assisted Mach-Zehnder optical switch based on silicon slot structure is presented in this paper. The interference arms of the switch are slot structures instead of regular single-mode waveguides. By filling electro-optic material in the void slot of the arms, direct electro-optic modulation can be introduced. Theoretical model and detailed analysis are given in this paper. The length-independent product V_πL is about 74 mV cm when slot width is 100 nm, and 37 mV cm when slot width is 50 nm, when the polymer with a electro-optical coefficient of γ₃₃ = 130 pm/V is assisted. An ultralow energy consumption of only 37 fJ/bit is achievable, and the turn-on time of the switch is less than 1.5 ps.     

非晶/结晶共混对聚合物光伏电池性能的影响

以局域规整聚（3-己基噻吩） （P3HT）制备了TiO₂/聚合物型双层结构光伏电池.利用稳态电流-电压测试和动态强度调制光电压谱,结合差热分析、吸收光谱和荧光光谱, 研究了非晶支化聚亚乙基亚胺（BPEI）作为P3HT膜层的添加成分对TiO₂/P3HT双层电池性能的影响.由于P3HT链的高结晶性,使得TiO₂/P3HT界面接触不好,导致电池性能差.当在P3HT中共混重量比W_BPEI/P3HT=1％—5％的BPEI时,电池性能得到显著改善;尤其是当W_BPEI/P3HT= 1％时,电池表现出近0.8V的开路电压和20μA/cm²的短路电流.结果表明BPEI对电池性能的影响不是源于P3HT-BPEI共混体系光学性能的变化,而主要是由于其改变了TiO₂/P3HT界面接触性能.BPEI对TiO₂/P3HT界面接触有两个相互竞争的影响,这取决于P3HT-BPEI共混体系的组成.一方面,通过降低P3HT的结晶度和增强与TiO₂表面的相互作用,改善P3HT链在TiO₂ 表面的附着;另一方面,当BPEI含量过高时,BPEI在TiO₂表面的附着量将增加,反而会阻碍P3HT与TiO₂表面的接触.良好的TiO₂/P3HT界面接触有利于提高激子的界面分离效率、光生电子的寿命和电池效率.本文结果有望为聚合物光伏电池性能的改善提供新的认识和方法. 关键词： 聚（3-己基噻吩） 二氧化钛 共轭聚合物 光伏电池     

Gravitational Deflection of Massive Particles by a Schwarzschild Black Hole in Radiation Gauge*

The exact metric of a Schwarzschild black hole in the true radiation gauge was recently reported.In this work, we base on this gravity and calculate the gravitational deflection of relativistic massive particles up to the fourth post-Minkowskian order. It is found that the result is consistent with the previous formulations for both the case of dropping the fourth-order contribution and the case of light deflection. Our result might be helpful for future high-accuracy observations.     

Modulational instability of incoherently coupled beams in azobenzene-containing polymer with photoisomerization nonlinearity

The modulational instability of two incoherently coupled beams in azobenzene-containing polymer with photoisomerization nonlinearity is investigated analytically and numerically. Our results show that as a precursor to spatial optical soliton formation, modulational instability can be adjusted and controlled by the wavelength combinations of the signal and background beams. We also discuss the dependences of strength of modulational instability on intensities of two signal beams and background beam. These findings make it possible to predict the formation of incoherently coupled soliton pairs in azobenzene-containing polymer.     

电子辐照下聚合物介质深层充电现象研究

空间辐射环境中,聚合物介质的深层充放电效应是威胁航天器安全的重要因素之一.文中在Chudleigh和von Berlepsch所发展的电位衰减模型基础上引入传输电流项,考虑了电子入射引起的感应电导率和感应电场的影响,提出了新的分析研究介质材料深层充电规律和特征的模型.通过该模型,分析了不同辐射条件下介质的表面电位、内部电荷与电场分布的变化,并设计实验及援引其他实验数据对模型分析结果进行验证.分析和实验结果表明,聚合物介质在深层充电过程中的平衡电位随着入射电子束流强度和介质电阻率的增加而增大,决定深层充电平 关键词： 深层充电 电荷传输模型 电子束 聚合物     

环氧大豆油与丙交酯星形共聚物支化度的表征

采用凝胶色谱(GPC)/示差检测器(RI)/十八角激光光散射仪(MALLS)联用技术, 对环氧大豆油(ESO)与丙交酯形成的星形共聚物(ESO-丙交酯)的结构进行了表征。实验结果表明: 随着ESO-丙交酯星形共聚物分子量的增长, 接枝数目呈现增多趋势、支化度从0.46E-4增大到0.78E-4、支化因子从0.82减小到0.15。本研究为高分子ESO-丙交酯星形支化共聚物的研究提供了科学依据。     

Chiral structure of the Roper resonance using complex-mass scheme

The pole mass and the width of the Roper resonance are calculated as functions of the pion mass in the framework of low-energy effective field theory of the strong interactions. We implement a systematic power-counting procedure by applying the complex-mass scheme.     

Optimizing Design for the Traveling Wave Electrodes in Low-Drive High-Speed Electro-Optic Polymer Modulators

Electro-optic (EO) polymer modulators are very promising in the realization of cost-effective and high-performance optical transmissions. In this article, general strategies and specific designs of the traveling wave electrodes in EO polymer modulators were presented to reduce the modulator drive power while maintaining a broadband response. The optimum device parameters and corresponding conditions were estimated using finite element method based on electrode design. In calculating the results, the comprehensive characteristics of polymer modulator with 1.21 V half-wave voltage and 91 GHz bandwidth was demonstrated with electro-optic interaction length is 20 mm, electro-optic coefficient is 55 pm/V, and operation wavelength is 1.319 μm. These results agree with the 0.8 V half-wave voltage and 30 mm electro-optic interaction length reported in Science. In the five designs presented, a hybrid electrode structure combining CPW and microstrip lines were advanced. The characteristics of this structure are like that of microstrip lines with a single-arm electrode on one arm of the waveguide, but it solves the problem of microstrip to coaxial line transition and corona polarization.     

Optical investigations of conducting polypyrrole under pressure

Abstract

The changes in the characteristics of vibrational and optical properties of the conducting form of polypyrrole under pressure is studied.