Synthesis and properties of new fluorene-containing copolymer via the catalytic dehydrocoupling reaction of 9,9-dipropargyl fluorene and 4,4′-diphenyl-2,6-dibromo-dithieno-[3,2-b:2′,3′-d]silole

ABSTRACT

New fluorene-containing copolymer was prepared via the catalytic dehydrocoupling reaction of 9,9-dipropargylfluorene and 4,4′-diphenyl-2,6-dibromo-dithieno-[3,2-b:2′,3′-d]silole in 44% yield. The resulting polymer was completely soluble in common organic solvents. The thermal behaviors and optical properties of the resulting polymer were measured and discussed. The chemical structure of polymer was characterized by NMR, IR, and UV-visible spectroscopies. The polymer showed characteristic wide UV-visible absorption band and blue PL maximum value at 440 nm, which is corresponding photon energy of 2.82 eV. The quantum yield (6.44%) of poly(DPF-DTS) was found to be 5 times higher than that of poly(DPF-bithiophene)).     

Effect of Initiator on the Over-Voltage Positive Temperature Coefficient of Linear Low Density Polyethylene/Carbon Black Nano Composites

The composite of linear low density polyethylene (LLDPE) with carbon black (CB) and inorganic flame retardant (aluminum hydroxide, Al(OH)₃) was prepared by melt-blending method. The effect of cross-linking on the stability of positive temperature coefficient (PTC) of composite and the elimination of negative temperature coefficient (NTC) of composite were investigated. LLDPE was chemically cross-linking with different contents of initiator (dicumyl peroxide, DCP). The cross-linking effects of composite were analyzed by gel content analysis, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). By the effect of DCP, not only the composite appeared a high PTC intensity, but also the NTC effect of composite was eliminated. In this investigation, the optimum PTC intensity of composite reached 5.87 orders of magnitude for the composition of LLD0.l0C33.7A28, and the PTC transitional temperature of composite decreased with increasing of DCP content. In addition, the good reproducibility of composites was proved by thermal cycling, and successfully passed the test of over-voltage resistance.     

Molecular associations in acacia gums

The tendency of polysaccharides to associate in aqueous solution has long been recognised. Molecular associations can profoundly affect their performance in a given application due to its influence on the molecular weight, shape and size. This will ultimately determine how the molecules will interact with each other, with other molecules and with water. There are several factors, such as hydrogen bonding, hydrophobic association, ion mediated association, electrostatic interaction, concentration dependence and the presence of proteinaceous components, which affect this behaviour. Our objective is to highlight the role of the proteinaceous component, present in acacia gum, to promote associations when the gum is subjected to various processing treatments such as maturation, spray drying and irradiation. The results demonstrate the ability of the proteinaceous component to promote hydrophobic associations which influence the size and proportion of the arabinogalactan high molecular weight component (AGP). Heat treatment in solid state (maturation) increases the hydrophobic character of the gum and hence its emulsification performance. Spray drying also involves aggregation through hydrophobic association but changes the surface properties of peptide moieties to become more hydrophilic compared to the association promoted by the maturation treatment in the solid state. Irradiation induced cross-linking, in the presence of unsaturated gas, was used to introduce C–C bonds into the carbohydrate moiety and thus confirms the hydrophobic association prompted by the heat used in the maturation and spray drying. This association can be reversed by treatments, such as filtration or high pressure homogenisation. The results reported here reconcile the contradiction about structure of gum arabic proposed by the wattle-blossom and twisted hairy rope models and shows that the AGP fraction is basically an aggregated fraction made up of AG units stabilized by low molecular weight highly proteinaceous components.

用于燃料电池的聚乙烯醇/纤维素/聚乙二醇碱性阴离子交换复合膜的制备及性能

通过对聚乙烯醇(PVA)/季铵化羟乙基乙氧基纤维素(QHECE)共混膜进行聚乙二醇(PEG)聚塑化改性, 采用物理-化学交联联用法制备了PVA/QHECE/PEG碱性阴离子交换复合膜. 通过交流(AC)阻抗、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)、 热重分析(TGA)、 气相色谱(GC)和拉伸实验等手段考察了不同PEG添加量对膜的离子电导率、 分子结构、 微观形貌、 热稳定性、 力学强度、 甲醇渗透率和耐碱稳定性等性能. 结果表明, PEG的加入(除最小比例外)提高了膜的离子电导率和力学强度并使其柔韧性增大. 同时, 膜的热稳定性比未添加PEG时提高了40℃. 将PVA/QHECE/PEG膜在80℃, 6 mol/L KOH浓碱溶液中浸渍处理264 h, 膜的电导率从1.06×10^-3 S/cm提高到3.88×10^-3 S/cm, 而膜的外观和力学强度及含水率未发生明显变化, 表明该膜具有很好的耐碱化学稳定性. 此外, 以3 mol/L甲醇溶液为测试目标, 膜的甲醇渗透率<10^-7 cm²/s, 仅为商业用Nafion^®膜的1/20~1/40.     

Fabrication of Covalently Linked PAH/PVS Layer-by-layer Assembled Multilayers via a Post-photochemical Cross-linking Strategy

A post-photochemical cross-linking strategy was successfully demonstrated to enhance the stability of polyelectrolyte poly(allylamine hydrochloride)(PAH)/poly(vinylsulfonic acid sodium salt)(PVS) multilayers. Conventional polyelectrolyte multilayers of PAH/PVS are usually fabricated through electrostatic layer-by-layer(LbL) assembly, resulting in poor stability, especially in basic solutions, which leads to the urgent demand for converting weak electrostatic interactions into covalent bonds to enhance the stability of the multilayers. This stability problem has been ultimately addressed by post-infiltrating a photosensitive cross-linking agent, 4,4'-diazostilbene-2,2'- disulfonic acid disodium salt(DAS), into the LbL assembled films to initiate the photochemical reaction to cross-link the multilayers. The obviously improved stability of the photo-cross-linked multilayers was demonstrated through experiments with basic solution treatments. Compared to the complete decomposition of uncross-linked multilayers in basic solution, over 74.4% of the covalently cross-linked multilayers were retained under the same conditions, even after a longer duration of basic solution treatment.     

壳聚糖–精氨酸树脂固定化胰凝乳蛋白酶及其性质

以自制的多孔、具柔性亲水手臂的壳聚糖–精氨酸树脂为载体,戊二醛为交联剂固定胰凝乳蛋白酶,确定了酶与载体的最佳比例为20 mg酶/g湿树脂,交联剂的最佳用量为10 mL 1.0%戊二醛/1.5 g湿树脂,交联时间为60 min,所得固定化酶的活力回收率达68.95%。固定化胰凝乳蛋白酶的Km为8.36 mg/mL,比游离酶增大1.52倍,其酶促反应10 min达到最大速率,具有接近游离酶的催化时间进程曲线;其最适温度为70 ℃,比游离酶升高10 ℃;其最适pH值为5.92,比游离酶酸性偏移2个pH值。此外,固定化胰凝乳蛋白酶具有良好的热稳定性和贮存稳定性,75 ℃时的半衰期为8 h,4 ℃时的半衰期为46天。     

化学交联聚乙烯醇改性纤维素碱性阴离子交换复合膜的制备与性能

高稳定性碱性阴离子交换膜的制备已成为碱性固体电解质膜研究领域的一大热点.本文通过聚乙烯醇化学交联改性制备出了季铵化羟乙基乙氧基纤维素碱性阴离子交换膜（PVA/QHECE）.采用傅里叶变换红外（FTIR）光谱、热重（TG）分析、交流（AC）阻抗等方法考察了复合膜的分子结构、热稳定性、耐碱稳定性及离子电导率等性能.详尽考察了交联时间、交联剂含量、聚合物组成对成膜力学强度、含水率以及OH^-电导率的影响.实验结果表明:随着交联时间的增加,膜的溶胀率降低,力学强度随之增强,而离子电导率随膜含水率的降低没有发生明显变化,室温下OH^-的电导率在3.26×10^-4-4.44×10^-4S·cm^-1范围内变化.热重分析结果显示:掺入42.9%的QHECE时,膜的热分解温度达260℃.此外,将PVA/QHECE膜在6 mol·L^-4 KOH浓碱溶液中80℃浸渍处理168 h,膜的电导率从4.90×10^-4S·cm^-1提高到9.68×10^-4S·cm^-1,而膜的外观和力学强度以及含水率未发生明显变化,这一结果表明该膜具有很好的耐碱化学稳定性,有望作为一种新型的碱性燃料电池用离子交换膜.     

交联XE－60和PEG－20M极性固定相非晶硅膜改性弹性玻璃毛细管柱研究

研究了交联ＸＥ－６０和ＰＥＧ－２０Ｍ极性固定相非晶硅膜改性弹性玻璃毛细管柱，在适当的温度下，用过氧化二异丙苯（ＤＣＵＰ）游离基引发交联，成功地制备了ＸＥ－６０和ＰＥＧ－２０Ｍ极性柱，它们均具有柱效高、惰性好、化学稳定性好和耐溶剂、抗腐蚀、耐高温等性能，是一种新型的极性交联柱。     

The use of DSC to characterize structural relaxation in thermosetting polymers

Structural relaxation in different epoxy-anhydride and epoxy-diamine resins has been investigated by differential scanning calorimetry using annealing and cooling rate experiments. The annealing experiments lead to the determination of enthalpy loss,H, at an equivalent annealing temperatureT _a=T _g-20, and for periods of annealing time, t_a, between 1 h and 4 months. The variation ofH with logt_a, defines a relaxation rate per decade,rrpd, which is very sensitive to changes of the epoxy network. The cooling rate experiments allow the determination of the apparent activation energy,h ^*. The effect of the degree of crosslinking, the addition of a reactive diluent, which acts as flexibilizer, and the length of cross-link onrrpd and h^* was studied.Financial support has been provided by DGICYT (Project no.PB93/1241). The authors are grateful to CIBA-GEIGY for supplying the epoxies and hardeners, and to HUNTSMAN CORPORATION EUROPE for supplying the JEFFAMINE*, J.M.H. wishes to acknowledge assistance for a sabbatical period from theMinisterio de Education y Ciencia.