Solubility of Triethylamine in Tetraethylammonium Chloride Aqueous Solutions from 20 to 35°C

Solubilities of triethylamine in aqueous tetraethylammonium chloride solutions were measured at 20, 25, and 35°C. The molalities in Et₄NCl of the aqueous solvents ranged from 0.03 to 1 mol-kg^–1. The data were evaluated from density measurements using a vibrating-tube densimeter. At each temperature, least-squares method was used to fit experimental density data points to double polynomial equations of various degrees. Triethylamine molalities of the saturated aqueous phases were estimated by extrapolation from those equations. Experimental data were interpreted in terms of hydrophobic and electrostatic perturbed domains in the hydration shells of the noneleceory and of the cation of the salt, as a function of temperature and salt concentration. The conclusions obtained are consistent with previous volumetric studies.     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

Investigations of the thermal stability and phase transformations in the system marocco phosphorite—(NH4)3H(SO4)2.NH4HSO4

Different physical chemical methods were used to study the thermochemical processes in a system involving a natural phosphate and complex acid salts of ammonium sulphate. The products of decomposition of the double ammonium salt and the products of their interactions with the phosphate were identified. The formation of ammonium and calcium polyphosphates and the disproportionation of P₃O ₁₀ ^5? and P₂O ₇ ^4? to PO ₄ ^3? and PO ₃ ^? were found to depend on the circumstances of the thermal interactions.     

用三乙胺盐酸盐对酚醛环氧树脂开环合成水溶性感光高分子的研究

用三乙胺盐酸盐与酚醛环氧树脂开环反应合成了一种水溶性聚合物，研究了相转移催化剂、反应时间、反应温度、开环顺序等条件对反应程度的影响。研究了开环反应中丙烯酸及三乙胺盐酸盐与酚醛环氧树脂的比例对产物的水溶性及感兴性能的影响。     

盐卤硼酸盐化学 Ⅻ. MgO·3B2O3·7H2O的热行为和脱水动力学

通过对合成MgO·3B2O₃·7H₂O的热分析研究确定热脱水反应的阶段、温度和产物,给出脱水过程的热化学反应方程式.利用甲醇、水与三氧化二硼之间的酯化反应进行相分离,确定该化合物高温结晶化产物的物相组成为晶态六硼酸镁(2MgO·3B₂O₃)和无定形B₂O₃.对该化合物的TG和DTG数据进行处理结果,给出了相应的非等温热脱水反应动力学方程.     

Synthesis and crystal structure of inclusion compounds: Trans-9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid with boric acid and tetrabutylammonium salt

Two new inclusion compounds (n-C₄H₉)₄N⁺C₁₈-H₁₃O₄ ⁻·B(OH)₃ (1) and (n-C₄H₉)₄N⁺C₁₈H₁₃O₄ ⁻ (2) were prepared and characterized by X-ray crystallography. Crystal data: compound 1, monoclinic P2(1)/c, a = 1.569 9(1) nm, b = 0.995 5(6) nm, c = 2.293 3(1) nm, β = 109.962(3)°, Z = 4, and R ₁ = 0.0434, wR = 0.075 9; compound 2, monoclinic C2/c, a = 1.400 5(3) nm, b = 1,282 1(2) nm, c = 1.765 7(3) nm, β = 100.388(1)°, Z = 4, and R ₁ = 0.0584, wR = 0.096 6. In the crystal structure of 1, the tetramers formed by two trans-9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid (EADA) anions and two boric acid molecules were connected through O—H⋯O hydrogen bonds to generate a channel type host lattice. The tetra-n-butylammonium cations were stacked to give two columns within each channel with cross-sectional size of about 2.30 nm × 0.93 nm. In the crystal structure of 2, similar honeycomb host lattices with big size were also formed along the [101] direction by three-dimensional accumulation of EADA anions. The tetra-n-butylammonium cations were accommodated in a zigzag fashion within each channel. Translated from Acta Chimica Sinica, 2006, 64(18): 1904–1910 [译自: 化学学报]     

固定有四硫富瓦烯.四氰基奎诺二甲烷的杂聚吡咯膜微葡萄糖电极

铂比互铂化处理后，形成疏松，粗糙的表面，将四硫富瓦烯－四氰基奎诺二甲烷导电有机盐入到铂化的铂黑微粒中。将３－羰基丁酸吡咯与吡咯按适当的比例在其表面用电化学聚合方法，将葡萄糖氧化酶固定于聚合形成的杂聚膜中制成微酶电极。该微酶电极测定时几乎不受氧分压影响，灵敏度高，响应快。     

Kinetics of the thermal decomposition of dinitramide

The kinetic regularities of the heat release during the thermal decomposition of liquid NH₄N(NO₂)₂ at 102.4–138.9 °C were studied. Kinetic data for decomposition of different forms of dinitramide and the influence of water on the rate of decomposition of NH₄N(NO₂)₂ show that the contributions of the decomposition of N(NO₂)₂ ⁻ and HN(NO₂)₂ to the initial decomposition rate of the reaction at temperatures about 100 °C are approximately equal. The decomposition has an autocatalytic character. The analysis of the effect of additives of HNO₃ solutions and the dependence of the autocatalytic reaction rate constant on the gas volume in the system shows that the self-acceleration is due to an increase in the acidity of the NH₄N(NO₂)₂ melt owing to the accumulation of HNO₃ and the corresponding increase in the contribution of the HN(NO₂)₂ decomposition to the overall rate. The self-acceleration ceases due to the accumulation of NO₃ ⁻ ions decreasing the equilibrium concentration of HN(NO₂)₂ in the melt. For Part 2, see Ref. 1. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 395–401 March 1998.     

The use of metallocenic esters of n-hydroxysuccinimide for metallohapten synthesis

Different organometallic markers have been described in a new technique for the labelling of many drugs. Thus metallocenic esters of [M = (;CO)₃CrC₆H₅?; (;CO)₃CrC₆H₅?(;CH₂)₃?; η-C₅H₅?FeC₅H₄?; (;CO)₃MnηC₅H₄?; (;CO)₃Mn?ηC₅H₄COCH₂CH₂?; ηC₅H₄(;ηC₅H₅)Co⁺PF^?₆] react with primary or secondary amine drugs [DRUG?NHR] for a psychostimulant drug: amphetamine; tricyclic antidepressants—desipramine and nortriptyline; a vasodilator—histamine; an adrenergic substance—norfenefrine; and for a central stimulant—meth-amphetamine, to give the metallohaptens MCON(;R)—DRUG. All these compounds have been fully characterized by different analytical methods and have potentialities for biological assays. This synthetic route was found better than one presented previously which utilized the metallocenic acid chloride MCOCI as intermediate, and could be proposed as a general synthetic route for labelling biological compounds which possess an amino group.     

Salts of α-cyanoacrylic acid with sterically hindered tertiary amines

Syntheses are reported for representatives of a new class of derivatives of -cyanoacrylic acid, namely, its salts with brucine, tert-butyldimethylamine, and diisopropylmethylamine.A. N. Nesmeyanov Institute of Organometallic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 212–214, January, 1992.