Determination of aluminum in highly concentrated iron samples: Study of interferences using high-resolution continuum source atomic absorption spectrometry

High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) has been used to investigate spectral and non-spectral interferences found with a conventional line source atomic absorption spectrometer in the determination of aluminum in pharmaceutical products containing elevated iron and sugar concentrations. A transversely heated graphite furnace was used as the atomizer in both spectrometers. The two most sensitive aluminum lines at 309.3 nm and 396.2 nm were investigated and it was found that an iron absorption line at 309.278 nm, in the vicinity of the aluminum line at 309.271 nm, could be responsible for some spectral interference. The simultaneous presence of iron and the organic components of the matrix were responsible for radiation scattering, causing high continuous and also structured background absorption at both wavelengths. The aluminum and iron absorption could not be separated in time, i.e., the iron interference could not be eliminated by optimizing the graphite furnace temperature program. However, an interference-free determination of aluminum was possible carrying out the measurements with HR-CS AAS at 396.152 nm after applying least squares background correction for the elimination of the structured background. Analytical working range and other figures of merit were determined and are presented for both wavelengths using peak volume registration (center pixel ± 1) and the center pixel only. Limits of detection and characteristic masses ranged from 1.1 to 2.5 pg and 13 to 43 pg, respectively. The method was used for the determination of the aluminum contamination in pharmaceutical formulations for iron deficiency treatment, which present iron concentrations from 10 to 50 g l^− 1. Spike recoveries from 89% to 105% show that the proposed method can be satisfactorily used for the quality control of these formulations.     

Chemical, sensory and microbiological changes of gamma irradiated coconut cream powder

A study was carried out to determine optimum decontamination dose for a locally manufactured coconut cream powder. Samples were gamma irradiated (0–15 kGy) and ageing process was achieved using GEER oven at 60 °C for 7 days, which is equivalent to one-year storage at room temperature. Iodine value (IV), ranging from 4.8 to 6.4, was not affected by radiation doses and storage, however peroxide value and thiobarbituric acid (TBA) generally increased with radiation doses. In most samples, peroxide value (meq/kg) reduced after storage, whilst the TBA (mg malonaldehyde/kg), indicator for product quality, slightly increased. The sensory evaluation conducted using 25 taste panellists indicated that scores on odour, creamy taste and overall acceptance for all irradiated samples at more than 5 kGy were significantly lower (P<0.05) than the control. However, the panellists could not detect any significant differences among the irradiation doses (P>0.05). All stored products were significantly different in colour, creamy taste, odour and overall acceptance (P<0.05) when compared to the non-stored non-irradiated control. Microbiological count of the samples prior to irradiation was in the range of 1×10²–1.7×10³ cfu/g with no detection of Salmonella sp. and Escherichia coli. No microbial colonies were detected after irradiation. Based on the TBA and overall sensory acceptance, gamma irradiation of 5 kGy was found to be the optimum dose and lower doses can be considered to decontaminate coconut cream powder.     

Optimisation of a flow injection system with electrochemical detection using the desirability function: Application to the determination of hydroquinone in cosmetics

A procedure is proposed in which the determination of hydroquinone using a flow injection system with electrochemical detection is described. Size and coefficient of variation of the signal are optimised by a desirability function and a central composite design. The robustness of the optimum reached in the optimisation step is evaluated by means a Plackett-Burman design. The optimised FIA system is able to determine hydroquinone with a minimum detectable net concentration of 10 μg l⁻¹ with a false positive probability of 0.05 and a false negative probability less than 0.05. In samples of bleaching cream, the proposed procedure has a recovery of 102.2% with standard deviation of 4.4% and a relative error of 6.2%.     

人体五行微量元素与百草元营养包均衡食疗的研究

通过对人体五行微量元素与食物吸收微量元素影响因素分析,采用“健脾开胃”均衡食疗配方,对百草元营养包的研制作了全面的介绍和论述。经临床患者食疗结果表明：总有效率为98%．该产品达到了预期设计目标与均衡食疗要求．     

Voltammetric determination of L-dopa using an electrode modified with trinuclear ruthenium ammine complex (Ru-red) supported on Y-type zeolite

The L-dopa is the immediate precursor of the neurotransmitter dopamine. Unlike dopamine, L-dopa easily enters the central nervous system and is used in the treatment of Parkinson’s disease. A sensitive and selective method is presented for the voltammetric determination of L-dopa in pharmaceutical formulations using a carbon paste electrode modified with trinuclear ruthenium ammine complex [(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]⁶⁺ (Ru-red) incorporated in NaY zeolite. The parameters which influence on the electrode response (paste composition, potential scan rate, pH and interference) were also investigated. The optimum conditions were found to an electrode composition (m/m) of 25% zeolite containing 6.7% Ru, 50% graphite and 25% mineral oil in acetate buffer at pH 4.8. Voltammetric peak currents showed a linear response for L-dopa concentration in the range between 1.2×10⁻⁴ and 1.0×10⁻² mol l⁻¹ (r=0.9988) with a detection limit of 8.5×10⁻⁵ mol l⁻¹. The variation coefficient for a 1.0×10⁻³ mol l⁻¹ L-dopa (n=10) was 5.5%. The results obtained for L-dopa in pharmaceutical formulations (tablet) was in agreement with compared official method. In conclusion, this study has illustrated that the proposed electrode modified with Ru-red incorporated zeolite is suitable valuable for selective measurements of L-dopa.     

Electrochemical studies and square-wave voltammetric determination of fenofibrate in pharmaceutical formulations

The electrochemical reduction of fenofibrate at a hanging mercury drop electrode (HMDE) was investigated by cyclic voltammetry, square-wave voltammetry, and chronoamperometry. Different buffer solutions were used over a wide pH range (3.0–10.0). The best definition of the analytical signals was found in borate buffer (pH 9.0)–tetrabutylammonium iodide mixture containing 12.5% (v/v) methanol at –1.2 V (versus Ag/AgCl). According to cyclic voltammetric studies, the reduction was irreversible and diffusion controlled. The diffusion coefficient was 2.38×10^–6 cm² s^–1 as determined by chronoamperometry. Under optimized conditions of square-wave voltammetry, a linear relationship was obtained between 0.146–4.96 g mL^–1 of fenofibrate with a limit of detection of 0.025 g mL^–1. Validation parameters such as sensitivity, accuracy, precision, and recovery were evaluated. The proposed method was applied to the determination of fenofibrate in pharmaceutical formulations. The results were compared with those obtained by a published high-performance liquid chromatography method. No difference was found statistically.     

Effect of γ-radiation on ointment cold cream

In this paper, Co-60γ ray was used to irradiate the ointment cold cream at room temperature (25°C). We also used FTIR, GC and thin film chromatogram to analyse various irradiated samples. It was found that the ointment cold cream can be irradiated at dose of 5–35 kGy and at dose rate from 0.2 to 0.6 kGy/h at room temperature (25°C) without evident decomposition. At dose of 5–15 kGy, the number of bacteria can be reduced to hygienic standard value. The radiation sterilization is a safe method for killing the bacteria in the ointment cold cream.     

A Kinetic Spectrophotometric Method to Determine the Insecticide Methyl Parathion in Commercial Formulations and the Aqueous Environment

Abstract

A simple kinetic-spectrophotometric method for the analysis of the organophosphate insecticide methyl parathien is presented. The method is based on the alkaline hydrolysis of the insecticide into its main metabolite p-nitrophenol. The influence of reaction variables (pH and temperature), and the effect of other pesticides, are discussed. The calibration graphs (initial rate, fixed time, fixed absorbance) were linear from 2 to 30μg/ml. The precision was calculated for the different methods applied, the relative standard deviation being 6.25% for 4μg/ml.

The proposed kinetic method can be applied directly to synthetic mixtures, commercial formulations and different aqueous environment, with recoveries close to 100%.     

Synthesis and Characterization of Canola-Based Cholesteryl Ester and Nematic E7 Mixture

Abstract

The fatty acid of Canola Oil, 61% of which is Oleic acid, was extracted. Fourier Transform Infrared Spectrophotometry (FTIR) confirmed the fatty acid extraction. Canola-based Cholesteryl Ester (CANCE) was obtained through esterification. FTIR scans of the CANCE and the fatty acid were compared to verify the complete esterification. The resulting crude product is a yellow wax with some crystals embedded on it. Thin layer chromatography was then performed to determine the appropriate solvent for the column chromatography to purify the crude sample. The purified product was characterized using Optical Polarizing Microscopy and Differential Scanning Calorimetry. Mixtures of the Nematic E7 and CANCE in different ratios were prepared. Transition temperatures of each mixture were determined using differential scanning calorimetry and verified using optical polarizing microscopy.     

Simultaneous Determination of Acetaminophen and Phenobarbital in Suppositories by Partial Least-Squares Spectrophotometric Calibration

Abstract

The use of partial least-squares spectrophotometric calibration for the simultaneous determination of suppositories in a multicomponent formulation is presented. This method is applied to the deternination of acetaminophen and phenobarbital in suppository preparations. The results show that these components in a molar ratio of about 61:1 in suppositories have been determined simultaneously with high precision.