Molecular dynamics simulations of dopant effectson lattice trapping of cracks in Ni matrix

Molecular dynamic analysis was performed on pure and doped (by Re, Ru, Co or W) Ni at 300 K using the embedded-atom-method (EAM) potentials to understand the crack formation of the doped Ni matrix in the (010)[001] orientation. When Ni was doped with Re, Ru, and W, the matrix demonstrated increased lattice trapping limits and, as a result, improved the mechanical properties. Consequently, this prevented the bond breakage at the crack tips and promoted crack healing. The average atomic and surface energy values increased when Re, Ru, and W were added. Analysis of these energy increase helped us to understand the influence these elements had on the lattice trapping limits. The fracture strength of the Ni matrix at 300 K increased because of the formation of the stronger Ni-Re, Ni-Ru, and Ni-W bonds. At the same time, doping the Ni matrix with Co did not demonstrate any strengthening effects because of the formation of Co-Ni bonds, which are weaker than the Ni-Ni bonds. Out of all dopants tested in this work, Ni doping with W showed the best results.     

三维有限体中平片裂纹的超奇异积分方程方法—Ⅱ.数值方法

超奇异积分方程方法的理论分析已在本文的第Ｉ部分中给出，这一部分是经的数值方法，及用此方法求解的若干典型的平片裂纹问题。     

给定寿命下的焊趾疲劳裂纹深度尺寸分析

本文提供并用统计方法研究了焊趾疲劳裂纹扩展的Ｎ～α曲线族，给出了联系给定裂纹尺寸下的疲劳分布，给定疲劳寿命下的裂纹尺寸分布以及随机初始条件的概率相容条件。研究表明，给定寿命下的焊趾疲劳裂纹深度尺寸α服从分布Ф［（μ（ａ）－ｌｏｇＮ）／σ（ａ）］。     

Fractal geometry concerned with stable and dynamic fracture mechanics

Fractal modeling of the rugged crack geometry is considered for the stable and dynamic fracture mechanics characterizing the morphology of a fracture surface and the influence of its growth. It is shown that the fractal dimension has a strong influence on the rising of the R-curve in brittle materials. For the unstable Griffith–Mott’s approach or dynamical crack growth the fractal dimension has a strong influence on the velocity limit of the crack growth. It is also shown that the limit of crack velocity lowers with increasing surface ruggedness (higher fractal dimension D = 2 − H) explaining the intangibility of the Rayleigh wave velocity by the cracks.     

磁粉法检测表面裂纹概率曲线的测定

本文介绍了利用实物零件测定裂纹检出概率的方法，并作出了用磁粉法检测表面裂纹的检测概率曲线，为大型构件检测周期的确定提供了可靠数据，为结构损伤容限设计，可靠性设计提供了重要的依据。     

Higher order asymptotic solution of mode I crack growth in elastic-perfectly plastic media

A higher order asymptotic solution of near-tip field is studied for plane-atrain Mode-I quasi-static steady crack growth in the incompressible (v=1/2) elastic perfectly-plastic media. The results show that the near-tip stress and strain are fully continuous, and the strain possesses In (A/r) singularity at the crack tip. The expressions of the stress, strain and velocity in each region are also given. The project supported by National Natural Science Foundation of China     

幂硬化可压缩材料Ⅰ型动态裂纹尖端奇异场

研究了平面应变条件下幂硬化可压缩材料中定常扩展的Ⅰ型动态裂纹尖端应力应变奇异场．采用Ｊ２流动理论和场量直角坐标分量，得到了应力应变奇异性不同时的裂纹尖端渐近场，其中场量的角变化规律和理想弹塑性材料的完全相同     

Use of the energy criterion of fracture to determine the shape of a slightly curved crack

An asymptotic formula is obtained for the total-energy increment during quasistatic growth of a semiin finite crack in an anisotropic elastic plane under complex loading. It is assumed that the shear loads are much larger than the tearing loads. The shape of the slightly curved crack was determined using the Griffith criterion in two versions: global and local. It is shown, in particular, that the first version leads to an improbable result. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 5, pp. 119–130, September–October, 2006.