Cs2CO3 Promoted coupling reactions for the preparation of skipped diynes

An improved methodology for the preparation of copper(I) alkynides has been developed using cesium carbonate as base. In the presence of cesium carbonate and CuI various 1-alkynes were converted smoothly to the corresponding copper alkynides which in situ reacted with propargylic halides in order to synthesize skipped diynes.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.     

电化学合成铜配合物的研究

采用金属铜为"牺牲"阳极,首次在无隔膜电解槽中,电化学溶解金属铜一步制备了纳米CuO前体Cu(OEt)2, Cu(OBu)2, Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac) (acac为乙酰丙酮基).产物通过红外光谱(FT-IR)、拉曼光谱(Raman spectrum)进行表征.同时讨论了影响电合成铜醇盐及其配合物的关键因素.实验表明,防止阳极钝化,温度控制在30～50 ℃,采用有机胺溴化物为导电盐, 电极电位控制在0.8～1.2 V之间,可以提高电合成效率.实验同时表明Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac)可作为制备含铜纳米材料前驱体.     

Co-deposition of Copper and Tin from Acidic Sulfate Solutions Containing Polyether Laprol 2402C: The Effect of Halides

Voltammetry and x-ray photoelectron spectroscopy data show micromolar amounts of halides to noticeably affect co-deposition of copper and tin from acidic sulfate solutions containing polyether Laprol 2402C as the surface-active substance. The reduction of Cu(II) slows down and that of Sn(II) accelerates in the series Cl^– < Br^– < I^–. Compounds on the surface of bronze coatings are oxides of Cu(I) and Sn(II) and halides of Cu(I).     

Phlogophites intercalated with Al2O3 pillars and modified with transition metals as catalysts of the DeNOx process

Natural phlogophite, pre-treated with acids and intercalated with alumina pillars, was used as catalytic support. Transition metals (Fe, Cu) were deposited on the surface of the modified clay materials by an ion-exchange method. The obtained samples were characterized with respect to structure (XRD), texture (BET), composition (EPMA) and chemical nature of the deposited transition metals species (UV-vis-DRS). The phlogophite based materials have been found to be active and selective catalysts of the DeNOx process. The Fe-containing samples were catalytically active at lower temperatures than the clays modified with copper. A competitive ammonia oxidation by oxygen decreased the effectiveness of the DeNOx process in the high temperature range.     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

BiPbSbSrCaCuO的超导电性

据报,在BiPbSrCaCuO中加Sb形成BiPbSbSrCaCuO体系的T_c可达130K。但其组成、结构、性质等均未见详细报道。我们合成了一系列BiPbSbSrCaCuO,发现了一个具有2212相结构、但T_c却为～110K的超导相。 试样制备包括将Bi_2O_3,PbO,Sb_2O_3,SrCO_3,CaO和CuO(AR级)混匀、碾磨、于     

Ba8Cu16P30 – eine neue ternäre Variante des Clathrat I-Strukturtyps

Ba₈Cu₁₆P₃₀ – a New Ternary Variant of the Clathrate I Type Structure Ba₈Cu₁₆P₃₀ (a = 14.117(1) Å, b = 10.093(1) Å, c = 28.022(2) Å) was prepared by heating a mixture of the elements (800°C; excess of Ba and P; removal of the by-products by acetic acid/H₂O₂). The compound crystallizes orthorhombically (Pbcn; Z = 4) in a new superstructure of the cubic clathrate I type structure with an ordered distribution of the atoms. The structure is characterized by a three-dimensional framework of CuP₄ tetrahedra with cavities in the form of pentagonal dodecahedra and tetrakaidecahedra, which are occupied by the Ba atoms. The compound shows semiconduction, therefore the composition should be Ba₈Cu_15.5P_30.5.     

硫胺的燐光研究

硫胺无燐光，在碱中氧化后才产生燐光。 λ激发＝３００ｎｍ，λ发射＝４１０ ｎｍ，燐光寿命为１．３ｓ．硫胺燐光受溶剂极性影响甚小，１５种金属离子中只有铜离子可增强流胺燐光，寿命变短为 ０． ９４ ｓ，但不影响燐光光谱。在开始３０ｍｉｎ内有ＣｕＳＯ４的作用较快，以后逐渐变慢，到 ４ｈ后达平衡与不用ＣｕＳＯ４的燐光相近，启示ＣｕＳＯ４具有催化硫胺的氧化作用，建立了硫胺的燐光分析方法，用于两种维生素Ｂ１片的分析，分别为９８．５％与９８％。     

Synthesis and Crystal Structure of the Copper Complex of 7，16-Bis（2-hyd roxy-5-met hylbenzyl）-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane

A lariat crown ether ligand 7,16-bis (2-hydroxy-5-methylbenzyl)- 1,4,10,13-tetraoxa-7,16-diazacyclooctadeeane (L1) has been prepared via one-pot Mannich reaction. Its copper(Ⅱ) complex Cu-L1 was synthesized and characterized by elemental analysis, IR and UV-visible spectroscopy. The crystal structure of the complex has been determined by X-ray diffraction analysis. The result shows that the copper(Ⅱ) ion is six-coordinated by two nitrogen and four oxygen atoms, two from the crown ether and the other two from the deprotonated phenolate anions, forming an elongated octahedral complex. Electrochemical study indicates that the complex undergoes reversible reduction in DMF solution.