微分倒数示波计时电位法的研究—定量测试及滴定分析

首次利用微分倒数示波图定量测试微量金属离子并滴定分析药物，结果满意。     

Struktur‐ und magnetochemische Untersuchungen an KCuGaF6

Structural and Magnetochemical Studies on KCuGaF₆ The crystal structure of KCuGaF₆ was determined on the base of X‐ray single crystal data (wR₂ = 0.084 for 2476 independent reflections). The compound crystallizes with a = 728.56(4), b = 989.51(6), c = 676.27(3) pm, β = 93.120(5)°, Z = 4 in space group P2₁/c of the pyrochlore related KCuCrF₆ type. The octahedral coordinations [GaF₆] and [CuF₆] are slightly resp. strongly distorted (mean values Ga‐F: 188.2 pm resp. Cu‐F: 188.2/200.1/227.6 pm). The longest distances Ga‐F and the shortest ones Cu‐F are found within octahedral chains of these two kinds of atoms, running along [100] and [001], resp., and being mutually bridged as well (M‐F‐M in between 114 and 145°). The magnetic mole susceptibilities measured at powders and at a single crystal follow the isotropic Heisenberg model for S = ¹/₂, if effects of chain disrupture are considered in the form of some paramagnetic portion. No indication of threedimensional magnetic order is observed down to T = 2 K and low magnetic fields H < 100 G. KCuGaF₆ (J/k = —71 K for the powder) is distinguished this way from the chain structure compounds KCuAlF₆ und Na₂CuScF₇ (J/k = —76 resp. —59 K) which were also magnetically studied and yield similar antiferromagnetic exchange constants J/k.     

Determination of Utratrace Silver Using Surfactant As Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Thermal lens spectrometry (TLS) is an excellent tool for trace analysis1. TLS allows the detection of absorbances of 10-7～10-8, concentration of ≈ 10-11 mol稬-1 and the analysis of 10-15 L volumes with ≈10-2 absorbing molecules2. Kinetic analysis is playing an increasingly important part in modern analytical chemistry. Therefore, TLS shows much promise in combination with kinetic analysis. However, there are few data on TLS applications in kinetic analysis method so far3～4. A ne…     

Synthesis, structural determination and photo-antiproliferative activity of new 3-pyrazolyl or -isoxazolyl substituted 4-hydroxy-2(1H)-quinolinones

A convenient route to new 3-quinolinonyl-pyrazoles and isoxazoles is described through cyclization of 3-[(E)-3-(dimethylamino)-2-propenoyl]-4-hydroxy-1-methyl-2(1H)-quinolinone. The phototoxicity as well as the cytotoxic activities of the title compounds are evaluated against leukemia- and adenocarcinoma-derived cell lines in comparison to the normal human keratinocytes.     

Genome-inspired search for new antibiotics. Isolation and structure determination of new 28-membered polyketide macrolactones, halstoctacosanolides A and B, from Streptomyces halstedii HC34

During the search for polyketide synthase (PKS) in the genome of Streptomyces halstedii HC34, we found clustered new genes which appeared to encode typical Type 1 PKSs beyond the cluster harboring the genes for the biosynthesis of antitumor antibiotic vicenistatin. The deduced domain configuration of these putative PKS genes allowed to predict a corresponding partial structure of polyketide, which was in turn materialized by isolation of new polyketide macrolactone halstoctacosanolides A and B from the fermentation broth of S. halstedii HC34. The structures of these metabolites were determined by spectroscopic means to have a novel 28-membered macrolactone structure. The partial structure deduced from the genetic data was completely compatible to the structures of halstoctacosanolides A and B. This success clearly demonstrates the present new approach of genome-inspired search for new antibiotics promising. Halstoctacosanolides A and B showed moderate antimicrobial activity against several microorganisms.     

Determination of selenium, zinc and cadmium in antidandruff shampoos by atomic spectrometry after microwave assisted sample digestion

Microwave assisted pre-treatments for atomic spectrometric determination (inductive coupled plasma-optical emission spectrometry, ICP-OES or flame atomic absorption spectrometry, FAAS) of metallic elements, usually present in antidandruff shampoos, are proposed. They are based on the digestion of the sample with HNO₃ into a closed reactor, which is irradiated at 800 W for a few minutes. Selenium was determined by ICP-OES. The limit of detection was 0.11 mg l⁻¹; the relative standard deviation (R.S.D.) for the selenium content in the samples was in the 0.6–3.6% range. The results obtained were in agreement with the label contents and the recovery of the proposed method was in the 100–106% range. Zinc and cadmium were determined by FAAS. The limit of detection for zinc determination was 0.078 mg l⁻¹; the R.S.D. for zinc contents was in the 0.8–8.6% range. A limit of detection of 0.09 mg l⁻¹ was obtained for cadmium determination; the R.S.D. for cadmium contents was in the 0.7–2.7% range. The determinations were performed after two different sample mineralization pre-treatments — dry ashing (in an electric furnace) and wet mineralization (in a microwave oven). Both methodologies provided comparable results for zinc and cadmium determination in shampoos. The proposed microwave assisted digestion procedures allow a precise and accurate determination of selenium, zinc and cadmium in commercial antidandruff shampoos, and the sample pre-treatment is less time-consuming than the classic methods.     

Determination of the purity of phenoxymethylpenicillin by micellar electrokinetic chromatography and reversed phase liquid chromatography on a monolithic silica column

A micellar electrokinetic chromatographic and a fast reversed‐phase liquid chromatographic method have been developed for determination of the purity of phenoxymethylpenicillin. The optimized running buffer composition was 40 mM phosphate–borate–125 mM SDS–3.5% (v/v) methanol. The HPLC method employed a monolithic silica C18 column and a mobile phase composed of phosphate buffer, pH 3.5, and ACN, the flow‐rate being 3.5 mL/min. Both methods were successfully validated. Linearity, intermediate precision, limits of quantitation, accuracy, and a good correlation of the HPLC and MEKC results were demonstrated. Both methods proved to be fast and reliable and sufficiently sensitive. A combination of the two methods can be very useful in impurity profiling.     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

新疆产12种中草药中微量金属元素的测定

本文测定了新疆产新疆党参,新疆元胡等１２种中草药中十种微量金属元素的含量．结果表明这些中草药中具有显著生理活性的Ｚｎ、Ｆｅ、Ｃｕ、Ｍｎ等元素．它们的含量除了个别样品外均大于或接近于国内其它地区所产的同种中草药、根据冠心病病因的Ｚｎ／Ｃｕ值假说和微量金属元素的含量关系,新疆产１２种中草药也可用于防治冠心病．     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.