苯乙烯-异戊二烯嵌段共聚物分子运动的脉冲核磁共振研究

用西德Bruke,MSL-300核磁共振谱仪研究了三个不同系列的苯乙烯-异戊二烯嵌段共聚物的固体回波谱。用PASCAL语言在谱仪提供的计算机上、用线性最小二乘法回归分析把实验曲线分解成快速和慢速两个组分,它们分别对应于嵌段共聚物中刚性相和流动相,从而给出样品两相结构的定性定量信息。     

乙基苯乙烯与二乙烯苯球形共聚物吸附树脂作反相薄层色谱固定相

本文合成了乙基苯乙烯与二乙烯苯球形共聚物PED－9吸附树脂，粒径3～7μm，用作薄层色谱固定相，对板效进行了研究，并通过分离实例说明它对硝基苯酚及芳胺具有优良的分离性能。     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

XPS C 1s binding energies for fluorocarbon–hydrocarbon microblock copolymers

Fluorocarbon–hydrocarbon microblock copolymers –(CF₂)_n–(CH₂)_m– (n = 4, 6, 8; m = 6, 8, 10) were synthesized. Binding energies of the C 1s and F 1s peaks of these copolymers were measured using x‐ray photoelectron spectroscopy. The binding energy of the C 1s peaks of the carbon atoms of the hydrocarbon segments was set at 285.0 eV as the binding energy reference. Unexpectedly, the binding energy of the C 1s peak corresponding to the CF₂ group of the microblock copolymers was determined to be ～291.4 eV, which is ～0.8 eV lower than that of the CF₂ group of tetrafluoroethylene. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of graft copolymer of ethyl cellulose through living polymerization and its self-assembly

Copolymers of ethyl cellulose (EC) with polystyrene (PSt) were synthesized through atom transfer radical polymerization (ATRP). The molecular weight of graft copolymers increased without any trace of the EC macro-initiator, and the polydispersity of the side chains was low. The molecular weight of the side chains increased with the monomer conversion. Kinetic study indicated that the polymerization was first order. The micelle characteristics of the graft copolymer in acetone were investigated using dynamic light scattering (DLS), atom force microscopy (AFM) and transmission electron microscopy (TEM). With increasing the concentration, micelles were gradually formed from the solution. The TEM and AFM images indicated that the micelles had spherical shape and showed core-shell structure.     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

Determination of Naphthalenesulfonate Isomers in Industrial Effluents and River Water by Solid‐Phase Extraction and Capillary Zone Electrophoresis

This work presents a method to separate polar naphthalenesulfonate (NS) isomers by capillary zone electrophoresis (CZE) with ultraviolet detection in industrial effluents and river water samples. The method involves extraction of samples by a polystyrene‐divinylbenzene copolymer (PS‐DVB) solid‐phase extraction (SPE) cartridge. The most effective CZE separation conditions were obtained in 20 mM borate buffer with 30% acetonitrile at pH 9.0 and 30 °C. The method proposed herein provides a high precision and sensitivity for NS isomers, to quantitation at ≤ 1.0 μg/L in 200 mL of the water samples. Recovery of the NS isomers in spiked water samples ranged from 73% to 87% while RSD ranging from 5.6 to 9.7%. The analysis of industrial effluents and river water samples was performed and naphthalene‐2‐sulfonate was found as a major pollutant. The difficulties in quantitating and identifying analytes in complex environmental samples can be resolved by using an internal standard response factor to calculate concentrations and relative migration times for peak confirmation.     

聚丙烯-聚乙烯嵌段共聚物的分子结构及性能的研究

本工作用核磁共振(~(13)C-NMR)、示差扫描量热(DSC)、动态力学分析(DMA)和扫描电子显微镜(SEM)等技术研究了将丙烯、乙烯单体两步分段共聚、预期为聚丙烯-聚乙烯嵌段共聚物的合成物(简称为聚丙烯-聚乙烯嵌段共聚物或嵌段共聚物)。结果表明,在嵌段共聚物中含有一定量的、能为正庚烷抽提出来的乙丙无规共聚物(EPR);分段共聚的产物并非预想的PP-b-PE两嵌段共聚物,而是含有多种组分的共混物;形态表征的结果表明了嵌段共聚物为多相体系,EPR和PE形成分散相以球形无规分布于PP基体中。     

Morphology and transport properties of protons and methanol through partially sulfonated block copolymers

The morphological changes with different compositions of casting solvents in the membranes of sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) were investigated with small-angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Using the single solvent of tetrahydrofuran (THF) and the solvent mixtures of methanol/THF with different compositions, the casting polymer solutions were prepared for the membrane fabrication. The proton conductivity and the methanol permeability of membranes were measured, and the effect of morphological changes on the casting solvents was discussed through Flory–Huggins theory. It was found that the sulfonated SEBS membranes were transformed from well ordered lamellar to disordered co-continuous structure and the morphological difference caused abrupt enhancement in the proton conductivity and the methanol permeability as the concentration of methanol in the mixed solvents (MeOH/THF) increased.     

Determination of residual levels of unsaturation in partially hydrogenated poly(2,3-diphenyl-1,3-butadiene) using TG

The thermal degradation characteristics of head-to-head poly(styrene) [HHPS] should provide insight with respect to the impact of head-to-head placement on the thermal stability of traditional atactic head-to-tail polymer [HTPS]. The synthesis of head-to-head poly(styrene) must be accomplished indirectly. The head-to-head polymer is most satisfactorily obtained by dissolving metal reduction of poly(2,3-diphenyl-1,3-butadiene) [PDBD] generated by radical polymerization of the corresponding diene monomer. Full saturation of the polymer mainchain requires several iterations of the reduction procedure. Since the decomposition of poly(2,3-diphenyl-1,3-butadiene) is prominent at 374°C and that for head-to-head poly(styrene) is similarly facile at 406°C, it seemed feasible that TG of partially hydrogenated PDBD might be utilized as a convenient means of monitoring the extent of hydrogenation. This has been demonstrated for various levels of unsaturation remaining - from approximately 90 to less than 10%. Within this range the peak areas from the DTG plots of the partially hydrogenated polymer provide a good reflection of the ratio of unsaturated to saturated units in the polymer. Even low levels of unsaturation in the polymer may be detected by the asymmetry of the decomposition peak for the polymer. This revised version was published online in August 2006 with corrections to the Cover Date.