壳管相变蓄热器强化传热实验研究

为了强化相变蓄热器传热性能,本文设计了三种新型壳管相变蓄热器结构,并对其换热性能进行实验研究.结果表明:在蓄热器内部添加分层结构和斜翅片换热性能最高,内部温度达到均匀化的时间随换热单元数增加而增大;换热管道间翅片的添加可有效地强化换热效果,改善蓄热器内部出现的温度严重分层现象,温度分布更加均匀;在研究范围内,换热流体温...     

Storage stability studies for tributyltin determination in human urine samples using headspace solid‐phase microextraction and gas chromatography mass spectrometry

A headspace solid‐phase micro‐extraction (HS‐SPME) method was employed in order to study the effect of storage conditions of human urine samples spiked with tributyltin (TBT) using gas chromatography and mass spectrometry. To render the analyte more volatile, the derivatization (ethylation) was made in situ by sodium tetraethylborate (NaBEt₄), which was added directly to dilute unpreserved urine samples and in buffers of similar acidity. The stability of TBT in human urine matrix was compared with the stability of TBT in buffer solutions of similar pH value. Critical parameters of storage conditions such as temperature and time, which affect the stability of TBT in this kind of matrix, were examined extensively. The tests showed that the stability of TBT remains practically satisfactory for a maximum of 2 days of storage either at +4 or 20°C. Greater variations were observed in the concentration of TBT in human urine samples at +4°C and lower ones at ?20°C over a month's storage. The freeze–thaw cycles have negative effect on the stability and should be kept to a minimum. The results from spiked urine samples are also discussed in comparison to those acquired from buffer solutions of equal TBT concentration. Copyright © 2012 John Wiley & Sons, Ltd.     

Ni–Al composite hydroxides fabricated by cation–anion double hydrolysis method for high-performance supercapacitor

Chemical doping of nickel hydroxide with other cations(e.g. Al~(3+)) is an efficient way to enhance its electrochemical capacitive performances. Herein, a simple cation–anion(Ni~(2+)and AlO_2) double hydrolysis method was developed toward the synthesis of nickel–aluminum(Ni–Al) composite hydroxides. The obtained composite hydroxides possesses a porous structure, large surface area(121 m~2/g) and homogeneous element distribution. The electrochemical test shows that the obtained composite hydroxides exhibits a superior supercapacitive performances(specific capacitance of 1670F/g and rate capability of 87% from 0.5 A/g to 20 A/g) to doping-free nickel hydroxide(specific capacitance of 1227 F/g and rate capability of 47% from 0.5 A/g to 20 A/g). Moreover, the galvanostatic charge/discharge test displays that after 2000 cycles at large current density of 10 A/g, the composite hydroxides achieves a high capacitance retention of 98%, indicative of an excellent electrochemical cycleability.     

Preparation and Characterization of Isotactic Polypropylene Reinforced with Hydroxyapatite Nanorods

Isotactic polypropylene (PP) composites filled with hydroxyapatite nanorods (nHAs) were fabricated using a melt compounding process. The effects of nHA additions on the structure, thermal, and mechanical properties as well as bioactivity of PP were investigated. Wide-angle X-ray diffraction and differential scanning calorimetry results showed that PP crystallized exclusively in the α-form when adding nHAs. Dynamic mechanical analysis showed that nHAs enhanced the storage modulus of PP. Mechanical measurements showed that nHAs stiffened and reinforced PP but reduced its tensile ductility and impact strength considerably. Furthermore, the PP/nHA nanocomposites were found to exhibit excellent bioactivity upon immersion in a simulated body fluid solution. This was attributed to the formation of apatite mineral crystals on the nanocomposite surfaces as revealed by scanning electron microscopy and energy dispersive X-ray analysis.     

硅橡胶包覆十八烷/聚(St-MMA)储能微胶囊复合材料制备及热性能

以十八烷/聚(苯乙烯-甲基丙烯酸甲酯)(P(St-MMA))微胶囊为相变材料,硅橡胶作为载体,制备了十八烷/P(St-MMA)/硅橡胶复合材料。研究了微胶囊的加入方式及加入量,硅橡胶包覆方法。通过红外光谱(IR)和扫描电镜(SEM)研究复合材料的结构和形貌。通过力学性能测试如拉伸强度、扯断伸长率,确定最佳的加工方法。通过热重分析法(TG)、差示扫描量热法(DSC)和储热性能对复合材料的热性能进行研究。结果表明,十八烷制成微胶囊加入到硅橡胶中,且微胶囊加入量是2份时,十八烷/P(St-MMA)微胶囊/硅橡胶的热稳定性热稳定性及力学性能较好。室温硅橡胶包覆微胶囊掺混固化法制备的复合材料的力学性能优于直接共混后热固化法和混炼涂抹后热固化法。十八烷/P(MMA-St)/硅橡胶复合材料的焓值为67.6J/g,储能效果好。     

Preparation and photochromic properties of pyrazolones/polyvinyl alcohol composite films

Novel photochromic composite films have been successfully fabricated by dispersing pyrazolone derivative:1,3-Diphenyl-4-(3-chlorobenzal)-5-hydroxypyrazole 4-phenylsemicarbazone (1a) into hydrosol of polyvinyl alcohol (PVA). The microstructure, photochromic behaviors and thermal bleaching properties were investigated by Raman spectroscopy, X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and ultraviolet-visible absorption spectroscopy (UV-vis). The results showed that 1a was not only blended but also well dispersed in the PVA polymer films with a suitable content of chromophore. Upon UV light irradiation, the composite films gradually changed from colorless to yellow and recovered fully to the initial state upon thermal bleaching. The time constants of photochromic reactions were almost the same as those of 1a observed in their crystalline state, indicating that the photochromic phenomenon is barely disturbed by the polymer matrix.     

Improving breakdown strength and energy storage efficiency of poly(vinylidene fluoride-co-chlorotrifluoroethylene) and polyurea blend films by double layer structure design

All-organic composites are widely used in energy storage application due to the high breakdown strength performance, but the improvement of energy storage was limited by the relatively low dielectric constant. Therefore, to satisfy the high demands of dielectric materials, energy storage properties of polymer composites should be further enhanced. In this article, poly(vinylidene fluoride-co-chlorotrifluoroethylene) (P(VDF-CTFE)) and polyurea (PUA), which are known as high dielectric ferroelectric material and linearly high energy storage efficiency material respectively, are composited through double layer (DL) casting method for the first time. The properties of DL structured composite film is contrasted with solution blending structure especially in energy storage efficiency, and the results demonstrate that DL structure design can make great use of advantages of two materials and also can avoid the influence of phase separation between P(VDF-CTFE) and PUA efficiently. Moreover, high breakdown strength (6180 kV/cm) and high energy storage efficiency (77%) of DL composites can be realized simultaneously by incorporating PUA as an insulating layer, and the mechanism is discussed in detail. This work provides an effective route to improve the energy storage properties of polymer dielectric materials and shows great application potential.     

An Intrinsic Photothermal Liquid for Light Detection and Energy Storage

Photothermal materials (PTMs) have been intensively investigated in the fields of photothermal conversion. Superior to solid PTMs, liquid PTMs are leading the trends in satisfying the demands of high flexibility and easy recycling. Successful examples of liquid PTMs are mostly formulated by dispersing solid PTMs in solvents, but suffer from the problems of phase segregation and solvent pollution. In this work, a low-cost formulation is proposed, which involves an oxidative product of ethyl oleate by iodine. It is an intrinsic liquid PTM, preserving the fluidic nature as well as possessing considerable ability for photothermal conversion. In addition to understanding the mechanism of light absorption in the visible and even near infrared windows, two examples are presented to demonstrate the great potential of liquid PTMs in broad areas such as light sensing and energy storage.     

Numerical modeling of chlorine concentration in water storage tanks

In this paper, we describe a numerical model to simulate the evolution in time of the hydrodynamics of water storage tanks, with particular emphasis on the time evolution of chlorine concentration. The mathematical model contains several ingredients particularly designed for this problem, namely, a boundary condition to model falling jets on free surfaces, an arbitrary Lagrangian–Eulerian formulation to account for the motion of the free surface because of demand and supply of water, and a coupling of the hydrodynamics with a convection–diffusion–reaction equation modeling the time evolution of chlorine. From the numerical point of view, the equations resulting from the mathematical model are approximated using a finite element formulation, with linear continuous interpolations on tetrahedra for all the unknowns. To make it possible, and also to be able to deal with convection‐dominated flows, a stabilized formulation is used. In order to capture the sharp gradients present in the chlorine concentration, particularly near the injection zone, a discontinuity capturing technique is employed. Copyright © 2015 John Wiley & Sons, Ltd.     

The Chemistry of Redox‐Flow Batteries

The development of various redox‐flow batteries for the storage of fluctuating renewable energy has intensified in recent years because of their peculiar ability to be scaled separately in terms of energy and power, and therefore potentially to reduce the costs of energy storage. This has resulted in a considerable increase in the number of publications on redox‐flow batteries. This was a motivation to present a comprehensive and critical overview of the features of this type of batteries, focusing mainly on the chemistry of electrolytes and introducing a thorough systematic classification to reveal their potential for future development.