蓄冷球堆积床动态放冷性能研究

根据蓄冷球和载冷剂之间的能量平衡,并考虑载冷剂与蓄冷球之间的换热系数变化、载冷剂的导热、蓄冷球堆积床热损失的影响,建立了蓄冷球堆积床放冷过程的数理模型。采用数值计算方法模拟了蓄冷球堆积床的放冷过程,并讨论载冷剂流速、载冷剂入口温度以及堆积床孔隙率对放冷过程中载冷剂出口温度和放冷量的影响。     

New chromaticity compensation approach and dynamic aperture increase in the SSRF storage ring

Strong chromatic sextupoles used to compensate natural chromaticities in the third generation light source storage ring usually reduce dynamic aperture drastically. Many optimization methods can be used to find solutions that provide large dynamic apertures. This paper discusses a new optimization approach of sextupole strengths with step-by-step procedure, which is applied in the SSRF storage ring, and a better solution is obtained. Investigating driving terms generated by the sextupoles in every step can analyze their convergences and guide the weight setting among different terms in object function of the single resonance approach based on the perturbation theory.     

越南火龙果冷藏现状分析

随着全球化经济的快速发展,食品冷藏技术日益重要.文中综述了越南火龙果的现有冷藏技术及其存在的问题,并提出解决方案.     

无损贮存及涨罐饱和相热力学模型研究

在低温液体无损贮存及涨罐研究方面,经常采用一种假设容器内气、液相均为饱和相的热力学模型.这种模型比较符合实际,并能够大大简化容器内的热力学状态,是一种比较常用的热力学模型.文中利用一个5m3低温贮罐进行的液氮无损贮存及涨罐试验,对该热力学模型进行了对比研究,讨论了饱和相热力学模型误差产生的原因,对于无损贮存和涨罐研究具...     

Heat conduction in a rock mass with an annular hot water store

Vast subterranean caverns may be used for hot water storage in distinct heating schemes; such caverns can be annular, with a central pillar. This paper considers the quasi-steady solution of the heat conduction equation for this geometry with periodic temperature variations     

轮背空腔-密封气对CAES向心涡轮变工况流动损失的影响

本文以国内首套MW级压缩空气储能(CAES)系统末级向心涡轮为研究对象,通过数值模拟分析了变工况条件下轮背空腔-密封气对等熵效率和流场结构的影响.结果表明:在求解中考虑轮背空腔-密封气结构能够使等熵效率数值解的偏差减小0.7%;随涡轮进口压力增加,轮背空腔泄漏流由叶片吸力面中部叶高区域逐渐向轮毂转移,流动损失先增加后减小;合理降低轮背空腔泄漏气体的轴向速度,能够减弱轮背空腔-密封气结构对等熵效率的负面影响,使向心涡轮在较宽的变工况范围内都保持高效运行.     

无水坝抽水蓄能系统高压溶气问题研究

无水坝抽水蓄能系统利用封闭容器内的高压气体构建虚拟水坝,是兼具压缩空气储能和抽水蓄能优点的新型储能系统。但该系统的封闭容器内水和气在高压状态共存有可能造成水中溶气,从而对水轮机造成汽蚀等破坏。本文采用实际气体状态方程及分子动力学模拟方法,研究了宽广的压力、温度范围下气体在水中的溶解及扩散规律,揭示了水中气体溶解量随时间和水深的变化规律。研究结果表明释能结束后保证水-气共容舱内剩余水的高度大于0.5 m时,高压溶气不会对水轮机产生危害,该结论对系统的工程应用及推广具有指导意义。     

Development of low concentrated solar photovoltaic system with lead acid battery as storage device

Energy storage system powered by renewable energies is a viable option to meet energy requirement without addition of carbon footprints to the environment. This study involves development of theoretical and computational models for a solar photovoltaic (PV) system coupled with a lead acid battery. The study commenced with selection of most appropriate lead acid battery and PV system for installation in a representative location in Riyadh, Kingdom of Saudi Arabia. Various technical and economic parameters were assessed and calculated by computational approach. The optimized lead acid battery was integrated with low concentration solar PV panels (CPV) followed by a feasibility study. Theoretical model was developed for the integrated system to calculate various parameters of the CPV and lead acid battery. Technical and economic assessment of this coupled unit was calculated using a theoretical approach. The developed model was then subjected to computational approach for verification and validation analysis of the integrated system. The detailed assessment of batteries and integrated system show the applicability of this system in Riyadh region. The research will be extended to develop energy storage systems for remote areas using lead acid batteries.     

DFT study of hydrogen storage in Pd-decorated C60 fullerene

Hydrogen storage reactions on Pd-doped C₆₀ fullerene are investigated by using the state-of-the-art density functional theory calculations. The Pd atom prefers to bind at the bridge site between two hexagonal rings, and can bind up to four hydrogen molecules with average adsorption energies of 0.61, 0.45, 0.32, and 0.21 eV per hydrogen molecule. With no metal clustering, the system gravimetric capacities are expected to be as large as 5.8 wt%. While the desorption activation barriers of the complexes nH₂ + Pd–C₆₀ with n = 1 are outside the department of energy (DOE) domain (?0.2 to ?0.6 eV), the desorption activation barriers of the complexes nH₂ + Pd–C₆₀ with n = 2–4 are inside this domain. While the interaction of 1H₂ with Pd + C₆₀ is irreversible at 459 K, the interaction of 2H₂ with Pd + C₆₀ is reversible at 529 K. The hydrogen storage of the irreversible 1H₂ + Pd–C₆₀ and reversible 2H₂ + Pd–C₆₀ interactions are characterised in terms of densities of states, infrared, Raman, and proton magnetic resonance spectra, electrophilicity, and statistical thermodynamic stability.     

碳纳米纤维吸附储氢性能分析

文中综合碳纳米纤维微观结构的表征结果以及氢吸脱附等温线的实验测量结果,对碳纳米纤维的吸附储氢性能进行了综合分析,分析发现:比表面积和中孔容积均与氢吸附量成线性关系;微孔容积对材料吸附性能影响较大,微孔容积与氢吸附量成抛物线关系;氢在常温左右以及77K下的吸附等温线呈现超临界气体的吸附特征,氢在273K和353K下的吸脱附等温线也基本重合,呈现的是物理吸附的特征。实验结果还说明:常温左右,甚至是77K下,碳纳米纤维均不适合于氢的吸附储存。