Optimal Energy-Storage Configuration for Microgrids Based on SOH Estimation and Deep Q-Network

Energy storage is an important adjustment method to improve the economy and reliability of a power system. Due to the complexity of the coupling relationship of elements such as the power source, load, and energy storage in the microgrid, there are problems of insufficient performance in terms of economic operation and efficient dispatching. In view of this, this paper proposes an energy storage configuration optimization model based on reinforcement learning and battery state of health assessment. Firstly, a quantitative assessment of battery health life loss based on deep learning was performed. Secondly, on the basis of considering comprehensive energy complementarity, a two-layer optimal configuration model was designed to optimize the capacity configuration and dispatch operation. Finally, the feasibility of the proposed method in microgrid energy storage planning and operation was verified by experimentation. By integrating reinforcement learning and traditional optimization methods, the proposed method did not rely on the accurate prediction of the power supply and load and can make decisions based only on the real-time information of the microgrid. In this paper, the advantages and disadvantages of the proposed method and existing methods were analyzed, and the results show that the proposed method can effectively improve the performance of dynamic planning for energy storage in microgrids.     

Periodic Mesoporous Organosilica Nanoparticles for CO2 Adsorption at Standard Temperature and Pressure

(1) Background: Due to human activities, greenhouse gas (GHG) concentrations in the atmosphere are constantly rising, causing the greenhouse effect. Among GHGs, carbon dioxide (CO₂) is responsible for about two-thirds of the total energy imbalance which is the origin of the increase in the Earth’s temperature. (2) Methods: In this field, we describe the development of periodic mesoporous organosilica nanoparticles (PMO NPs) used to capture and store CO₂ present in the atmosphere. Several types of PMO NP (bis(triethoxysilyl)ethane (BTEE) as matrix, co-condensed with trialkoxysilylated aminopyridine (py) and trialkoxysilylated bipyridine (Etbipy and iPrbipy)) were synthesized by means of the sol-gel procedure, then characterized with different techniques (DLS, TEM, FTIR, BET). A systematic evaluation of CO₂ adsorption was carried out at 298 K and 273 K, at low pressure. (3) Results: The best values of CO₂ adsorption were obtained with 6% bipyridine: 1.045 mmol·g⁻¹ at 298 K and 2.26 mmol·g⁻¹ at 273 K. (4) Conclusions: The synthetized BTEE/aminopyridine or bipyridine PMO NPs showed significant results and could be promising for carbon capture and storage (CCS) application.     

Dielectric Properties Investigation of Metal–Insulator–Metal (MIM) Capacitors

This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al₂O₃/TiO₂/HfO₂ dielectric-film-based metal–insulator–metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al₂O₃-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm⁻², desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10⁻¹⁰ A·cm⁻², and quadratic voltage coefficient of 303.6 ppm·V⁻². Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm⁻² and 0.25 fF·µm⁻². Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole–Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.     

AB_2型储氢材料表面吸氢的光电子谱研究

AB2 型金属间化合物是新型的储氢材料 ,对 Zr V2 和 Zr Mn2 表面吸氢前后进行了紫外光电子谱( UPS)测量 .吸氢前后的差谱中 ,发现 Zr V2 吸氢后 ,结合能在 8e V左右出现较宽的吸附氢诱导的光电子谱峰 ;而 Zr Mn2 吸氢后 ,在 5e V左右有一个明显的峰 .实验结果表明 :氢在 Zr V2 表面的吸附所成M—H键的电子态的结合能比 Zr Mn2 表面上的要大 ,与 Zr V2 吸氢能力较强是一致的     

低温液体无损贮存压力升高的实验与计算

准确、简单地预测低温液体无损贮存时的压力升高具有重要的实用价值。对一低温容器利用液氮为介质进行了多次无损贮存实验,利用多元线性回归方法对实验数据进行分析和检验。分析表明无损贮存时间、初始充满率对压力升高的影响较大,而环境温度的影响可以忽略,并拟合出了压力升高的计算公式。计算结果和实验结果在很大范围内能够较好地吻合。该种计算方法在预测低温液体无损贮存压力升高时有较高的准确性与可靠性。     

Rotation selectivity of random phase encoding in volume holograms

We present the study of angular selectivity for holographic multiplexing based on random phase encoding by a ground glass. The rotational selectivity of the volume hologram is calculated theoretically and coincides with the experimental measurement. By controlling the parameters including rotational center, effective numerical aperture of both volume hologram and the ground glass, we can obtain different rotational selectivity applied to random phase encoding in volume holographic storage.     

Convection in the bridgman growth of narrow-gap semiconductors

Summary The free convection in the melt during the crystal growth of small-gap semiconductors, and its influence on the electrical properties are discussed. Dimensionaless parameters of the fluid flow, electrical properties of PbTe, Pb_1−x Sn _x Te and Hg_1−x Cd _x Te single crystals, grown by vertical Bridgman technique at very low velocity, and some structures, found in these materials, support the presence of free convection.     

偶氮基染料掺杂薄膜的双光子图象存储

研究了偶氮基染料掺杂薄膜ＭＯ－ＰＶＡ和ＥＯ－ＰＶＡ的双光子存储特性。在对薄膜用Ａｒ＾＋激光作预激发下实现了Ｈｅ－Ｎｅ激光的红光存储。获得了实时和短时存储照片。光电记录存储曲线，分析了双光四能级系统的存储机制。实现确定了最佳预激发功率约为０．２８Ｗ／ｃｍ＾２，最小Ｈｅ－Ｎｅ光可存储功率密度低于０．２Ｗ／ｃｍ＾２。     

Experimental test of special relativity by laser spectroscopy

The Doppler-free laser-spectroscopic frequency measurement of Doppler-shifted optical lines in forward and backward direction of a fast ion beam permits a sensitive test of the relativistic Doppler-formula and, hence, the relativistic time dilation factor . An experiment on metastable ⁷Li⁺, stored at a velocity of v = 0.064c in the Heidelberg heavy-ion storage ring TSR, has confirmed time dilation with unprecedented accuracy. Latest tests at two different ion-velocities (v = 0.03c and v = 0.064c) will enhance these measurements. An improved version of this experiment will be carried out at the experimental storage ring (ESR) at the Gesellschaft für Schwerionenforschung (GSI) in Darmstadt. The ESR permits ⁷Li⁺ to be stored at v = 0.33c which promises an improvement of the sensitivity to deviations from γ _SR by an order of magnitude. A first test at the ESR has shown the feasibility for this kind of experiment.