Simultaneous determination of tetracyclines and their degradation products in environmental waters by liquid chromatography–electrospray tandem mass spectrometry

A sensitive method was developed for the trace determination of six tetracyclines and ten of their degradation products in influent, effluent, and river waters using liquid chromatography–electrospray tandem mass spectrometry detection, combined with Oasis hydrophilic–lipophilic balance (HLB) cartridge extraction and Oasis mixed-mode strong anion exchange (MAX) cartridge cleanup. Tetracyclines and their products were separated by liquid chromatography in 9.5 min, and the instrument detection limits were generally between 0.03 and 0.1 μg/L except for minocycline (0.5 μg/L). The chromatograms were improved through the MAX cleanup and no apparent matrix effect was found. The recoveries of all the target compounds except for 4-epianhydrochlortetracycline and anhydrochlortetracycline (34–52%) were 75–120% for influent, 61–103% for effluent, and 64–113% for river waters. The method detection limits (MDLs) of the analytes varied in the range of 0.8–17.5 ng/L in all studied matrices. The method was applied for the determination of tetracyclines and their products in a sewage treatment plant (STP) and surface waters in Beijing, China. Oxytetracycline (3.8–72.5 ng/L), tetracycline (1.9–16.5 ng/L), and five products including 4-epitetracycline, 4-epioxytetracycline, isochlortetracycline, anhydrotetracycline, and 4-epianhydrochlortetracycline (5.7–25.3 ng/L) were detected in wastewater, while only oxytetracycline and tetracycline (2.2 and 2.1 ng/L) were detected in surface water samples.     

微/纳米ZnO绒球的制备及其在自然光下催化降解有机染料性能

以谷氨酸氟硼酸(GluBF₄)离子液体水溶液为反应介质,以物质的量比为1:6的二水合醋酸锌[Zn(Ac)₂·2H₂O]和氢氧化钠为原料,室温下制备前驱体,再微波辅助加热制备了纳米氧化锌粉体,获得了纳米结构微米尺寸纳米ZnO绒球.利用场发射扫描电镜(FESEM)、X射线衍射(XRD)、比表面(BET)、能量色散谱(EDS)等对产物进行了表征.所得产物为六方晶系纤锌矿结构,粉体粒径20.4 nm,绒球比表面积为28.3 m²·g^-1,产物纯度较高,收率95.3%.同时探讨了纳米ZnO绒球生成的可能机理.该纳米材料在日光下显示较高的光催化活性和稳定性.分别配制浓度为10 mg·L^-1的100 mL甲基橙(MO)和甲基紫(MV)水溶液, 30 mg纳米氧化锌为光催化降解催化剂,太阳光激发下5 h脱色率分别达到74.3%和96.9%;溶液总有机碳(TOC)含量随光降解的进行缓慢下降;光催化剂重复利用5次,催化剂形貌不变、颜色不变,质量基本未发生变化.     

Stereoselective synthesis and absolute configuration of the C33-C42 fragment of symbiodinolide

Cross-metathesis of methyl ester which was prepared from symbiodinolide with ethylene was performed to give the C33-C42 degraded fragment. This fragment was estimated to be (36S,40S)-diol by the modified Mosher method. Stereoselective synthesis of the (36S,40S)-diol and its diastereomer (36R,40S)-diol was achieved from l-aspartic acid. Synthetic bis-(S)- and (R)-MTPA esters which were derivatized from the (36S,40S)-diol exhibited spectroscopic data identical with those of bis-(S)- and (R)-MTPA esters derived from the degraded product. Thus, the absolute stereochemistry of the C33-C42 fragment was elucidated to be (36S,40S).     

Application of isotopic labeling,and gas chromatography mass spectrometry,to understanding degradation products and pathways in the thermal-oxidative aging of Nylon 6.6

Nylon 6.6 containing ¹³C isotopic labels at specific positions along the macromolecular backbone has been subjected to extensive thermal-oxidative aging at 138 °C for time periods up to 243 days. In complementary experiments, unlabeled Nylon 6.6 was subjected to the same aging conditions under an atmosphere of ¹⁸O₂. Volatile organic degradation products were analyzed by cryofocusing gas chromatography mass spectrometry (cryo-GC/MS) to identify the isotopic labeling. The labeling results, combined with basic considerations of free radical reaction chemistry, provided insights to the origin of degradation species, with respect to the macromolecular structure. A number of inferences on chemical mechanisms were drawn, based on 1) the presence (or absence) of the isotopic labels in the various products, 2) the location of the isotope within the product molecule, and 3) the relative abundance of products as indicated by large differences in peak intensities in the gas chromatogram. The overall degradation results can be understood in terms of free radical pathways originating from initial attacks on three different positions along the nylon chain which include hydrogen abstraction from: the (CH₂) group adjacent to the nitrogen atom, at the (CH₂) adjacent the carbonyl group, and direct radical attack on the carbonyl. Understanding the pathways which lead to Nylon 6.6 degradation ultimately provides new insight into changes that can be leveraged to detect and reduce early aging and minimize problems associated with material degradation.     

Biodegradation-induced surface change of polymer microspheres and its influence on cell growth

Biodegradable microspheres were fabricated by poly(?-caprolactone) (PCL) homopolymer and poly(?-caprolactone-b-ethylene oxide) (PCL-b-PEO) amphiphilic block copolymer. The regulation of microsphere surface morphology was successfully achieved by controlled enzymatic degradation. The morphological changes induced by biodegradation and their influences on the growth of MG-63 human osteosarcoma cells were studied. Results based on the evaluation of cytotoxicity and the morphological observation of MG-63 cells cultivated on microspheres showed better growth of cells on the surface of degraded microspheres than on the surface of those undegraded microspheres no matter they were fabricated by homopolymers or copolymers. The influences of morphological changes of microsphere surface before and after biodegradation on MG-63 cell growth were discussed. The results of this work indicated that the biodegradation-induced morphological changes of microspheres could be well controlled and were favorable for MG-63 cell attachment and proliferation.     

A Polypyridyl‐Based Layered Complex as Dual‐Functional Co‐catalyst for Photo‐Driven Organic Dyes Degradation and Water Splitting

With the ever‐increasing concerns on environmental pollution and energy crisis, it is of great urgency to develop high‐performance photocatalyst to eliminate organic pollutants from wastewater and produce hydrogen via water splitting. Herein, a polypyridyl‐based mixed covalent Cu^I/II complex with triangular {Cu₃} and rhombic {Cu₂Cl₄} subunits alternately extended by mixed SCN^– and Cl^– heterobridges [Cu₄(DNP)(SCN)Cl₄]_n ( 1 ) [DNP = 2,6‐bis(1,8‐naphthyridine‐2‐yl)pyridine] was solvothermally synthesized and employed as a dual‐functional co‐photocatalyst. Resulting from a narrowed band‐gap of 1.07 eV with suitable redox potential and unsaturated Cu^I/II sites, the complex together with H₂O₂ can effectively degrade Rhodamine B and methyl orange up to 87.4 and 88.2 %, respectively. Meanwhile, the complex mixed with H₂PtCl₆ can also accelerate the photocatalytic water splitting in the absence of a photosensitizer with the hydrogen production rate of 27.5 μmol · g^–1 · h^–1. These interesting findings may provide informative hints for the design of the multiple responsive photocatalysts.     

Sensor Array Based Determination of Edman Degradated Amino Acids Using Poly(p-phenyleneethynylene)s

A cross-reactive optical sensor array based on poly(p-phenyleneethynylene)s (PPEs) determines Edman degraded amino acids. We report a sensor array composed of three anionic PPEs P1–P3 , and their electrostatic complexes with metal ions (Fe²⁺, Cu²⁺, Co²⁺). We recorded distinct fluorescence intensity response patterns as “fingerprints” of this chemical tongue toward standard phenylthiohydantoin (PTH) amino acids—degradation products of the Edman process. These “fingerprints” were converted into canonical scores by linear discrimination analysis (LDA), which differentiates all of the PTH-amino acids. This array discriminates PTH-amino acid residues degraded from an oligopeptide through Edman sequencing. This approach is complementary to chromatography approaches which rely on mass spectrometry; our array offers the advantage of simplicity.     

Determination of C1−C4 fatty acids as p-bromophenacyl esters using glass-capillary gas chromatography and electron-capture detection

Summary A method for the determination of low relative molecular mass carboxylic acids (C₁–C₄) in water is reported. The acids are converted to p-bromophenacyl esters prior to a glass-capillary gas chromatographic separation. By utilizing electron-caputre detection the detectability is substantially improved compared to flame-ionization detection. A comparison of three different ways to treat the water samples and to produce the derivatives is made. It is shown that the , p-dibromoacetophenone reagent decomposes to a small extent which limits the utility of the reagent. Nevertheless a detection limit for formic acid of approximately 2.5 mgl^–1 is obtained. The method is applied to the determination of formic and acetic acids in a paper kraft water sample.     

Improved STR typing of telogen hair root and hair shaft DNA

Today the STR typing of telogen hair and hair shafts is regarded as a challenge. The small DNA quantity in the hair is highly degraded. Another problem are PCR inhibitors in the hair. In particular hair pigments, the melanins, are known to inhibit PCR. Hairs are exposed to sunlight and partly to chemical oxidation processes, which make them even more difficult to analyze. To increase the chances of a correct typing of hair, the small amount of DNA must be successfully isolated and the inhibitors have to be removed or neutralized. Furthermore, miniSTR typing improves the analysis of stains with degraded DNA like it is the case with hair. We introduce a nonorganic extraction method and in addition a miniSTR concept which is promising in typing stains with little and degraded DNA, especially hairs. The miniSTR concept including five database STRs (SE33, VWA, TH01, FGA, D3S1358) and the gender typing system Amelogenin was optimized for the amplification of hair DNA. Compared to commercial STR kits, this approach resulted in considerably higher success rates.     

Effects of organoclay modifiers on the flammability, thermal and mechanical properties of polycarbonate nanocomposites filled with a phosphate and organoclays

Polycarbonate was melt blended with solid bisphenol A bis(diphenyl phosphate), and a series of organoclays. Effects of the organoclay modifiers on the flammability, thermal and mechanical properties of the nanocomposites were studied by limiting oxygen index, UL-94 burning test, thermogravimetric analysis, differential scanning calorimetry, tensile test and dynamic mechanical analysis. Although all the nanocomposites exhibit an intercalated-exfoliated morphology, they vary in the magnitude of intercalation revealed by X-ray diffraction and transmission electron microscopy. Flammability of the nanocomposites is strongly related to the thermal stability rather than the morphology. Glass transition temperature (T_g) and mechanical properties are controlled by both the morphology and the affinity of the organoclays with the matrix. The modifier containing hydroxyl moiety has stronger interactions with the matrix but it can promote its degradation, thus the corresponding nanocomposite exhibits a better intercalated morphology, higher T_g, superior strength and modulus however a worse thermal stability and flame retardancy. An additional silane within the organoclays would make the organoclays more compatible with the matrix but be a steric obstacle to the intercalation of the matrix chains; however, flame retardancy of the corresponding nanocomposite is enhanced due to the flame retardant nature of the silane. Similarly, the modifier bearing two long alkyl tails shows stronger affinity with the matrix than the one bearing a single tail, but it would hinder the intercalation due to the steric effect. These establishments between organoclay modifiers and the properties of nanocomposites might be guidance for developing materials with practical applications.