Dissipation Behavior and Acute Dietary Risk Assessment of Thiamethoxam and Its Metabolite Clothianidin on Spinach

Thiamethoxam and its metabolite clothianidin residues pose a potential threat to human health. This study aims to investigate the residue behavior and acute dietary risk assessment of thiamethoxam and clothianidin on spinach. Thiamethoxam and clothianidin were extracted using a quick, easy, cheap, effective, rugged, safe (QuEChERS) method and analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS). At spike levels from 0.01 to 5 mg kg⁻¹, the average recoveries of both analytes were in the range of 94.5–105.5%, with relative standard deviations (RSDs) of 3.8–10.9%. The dissipation behavior of thiamethoxam followed first-order kinetics, with half-lives of ≤1.6 days. Clothianidin appeared readily as a plant metabolite with highest level exhibited during 3 to 5 days after application. Temperature and light may be two main factors for degradation of thiamethoxam. Besides, acute risk assessment of thiamethoxam and clothianidin was evaluated with risk quotients (RQs) <100%, which suggested a low health risk for all consumer groups of Chinese residents.     

Ochratoxin A and 2′R-Ochratoxin A in Selected Foodstuffs and Dietary Risk Assessment

The aim of this study was to estimate the contamination of grain coffee, roasted coffee, instant coffee, and cocoa purchased in local markets with ochratoxin A (OTA) and its isomerization product 2′R-ochratoxin A (2′R-OTA), and to assess risk of dietary exposure to the mycotoxins. OTA and 2′R-OTA content was determined using the HPLC chromatography with immunoaffinity columns dedicated to OTA. OTA levels found in all the tested samples were below the maximum limits specified in the European Commission Regulation EC 1881/2006. Average OTA concentrations calculated for positive samples of grain coffee/roasted coffee/instant coffee/cocoa were 0.94/0.79/3.00/0.95 µg/kg, with the concentration ranges: 0.57–1.97/0.44–2.29/0.40–5.15/0.48–1.97 µg/kg, respectively. Average 2′R-OTA concentrations calculated for positive samples of roasted coffee/instant coffee were 0.90/1.48 µg/kg, with concentration ranges: 0.40–1.26/1.00–2.12 µg/kg, respectively. In turn, diastereomer was not found in any of the tested cocoa samples. Daily intake of both mycotoxins with coffee/cocoa would be below the TDI value even if the consumed coffee/cocoa were contaminated with OTA/2′R-OTA at the highest levels found in this study. Up to now only a few papers on both OTA and 2′R-OTA in roasted food products are available in the literature, and this is the first study in Poland.     

基于模糊综合评判的大学数学考核方式改革

独立高校数学课程的开设旨在让学生掌握数学知识的基础上,提高数学应用能力.然而现行的考核方式存在重考试结果,轻学习过程等问题.从传统考核方式入手,指出其不足之处,基于模糊综合评判法建立新型评价体系和数学模型,通过试点运行验证了新的考核方式的可行性、客观性、合理性和科学性.     

SIMCA分类法与PLS算法结合近红外光谱应用于卷烟纸的质量控制

应用SIMCA分类法与PLS算法结合卷烟纸的傅里叶变换近红外光谱(FT-NIR)建立了卷烟纸的分类模型,用于卷烟纸的判别分类,效果良好;同时,建立了测定卷烟纸定量、厚度、透气度、水分和灰分等性质的校正模型,其相应的相关系数分别为0.976 8,0.966 4,0.947 0,0.956 3和0.975 9;全交互校验均方残差分别为0.561 4,0.096 0,1.274 1,0.096 7和0.260 3。校正模型应用于样品实测,结果准确,令人满意。     

Development of low concentrated solar photovoltaic system with lead acid battery as storage device

Energy storage system powered by renewable energies is a viable option to meet energy requirement without addition of carbon footprints to the environment. This study involves development of theoretical and computational models for a solar photovoltaic (PV) system coupled with a lead acid battery. The study commenced with selection of most appropriate lead acid battery and PV system for installation in a representative location in Riyadh, Kingdom of Saudi Arabia. Various technical and economic parameters were assessed and calculated by computational approach. The optimized lead acid battery was integrated with low concentration solar PV panels (CPV) followed by a feasibility study. Theoretical model was developed for the integrated system to calculate various parameters of the CPV and lead acid battery. Technical and economic assessment of this coupled unit was calculated using a theoretical approach. The developed model was then subjected to computational approach for verification and validation analysis of the integrated system. The detailed assessment of batteries and integrated system show the applicability of this system in Riyadh region. The research will be extended to develop energy storage systems for remote areas using lead acid batteries.     

Photochemically Produced Superhydrophobic Silane@polystyrene-Coated Polypropylene Fibrous Network for Oil/Water Separation

Cost-effective separation of oil and immiscible organic contaminants from water has become an urgent challenge to protect aquatic and human life from devastating effects. Therefore, it has become imperative to develop super-selective materials for efficiently separating oil from water. In this work, a superhydrophobic surface has been formed that consists of a silane@polystyrene-coated polypropylene fibrous network (silane@PS-PPF) for efficient separation of accidentally spilled oil from water. The superhydrophobic PPFs were designed by a simple, cost-effective two-step process that includes photochemically controlled polymerization of styrene and subsequent dip coating in octadecyltrichlorosilane solution. The hydrophobic surface (CA=129°±4°) of the PS coated PPF after treating with silane was turned into a superhydrophobic body (CA=161°±2°). The achieved silane@PS-PPF fibrous network selectively allowed the fast permeation of the oils and non-polar organic liquids by altogether rejecting water during operation. The separation efficiency for various oils from the contaminated water was 96 to 99%, with a high flux in the range of 7606±312 L m⁻²h⁻¹ to 9870±151 L m⁻²h⁻¹. Apart from being used as a filter, the silane@PS-PPF was also used as an oil absorber and has shown an absorption capacity in the range of 1185 to 1535% for various oils. We anticipate that the developed silane@PS-PPF, due to its facile synthetic route, cost-effectiveness, and high performance, can be effectively used in oily wastewater treatment and clean-up of large oil spills from water.     

中美无机化学课程比较与探讨*——以美国康奈尔大学与河北工业大学无机化学课程为例

以河北工业大学和美国康奈尔大学的无机化学课程为例,从教材设置、教学方法和课程考核评价方式等方面对该课程教学进行了对比探讨,以期构建一套符合我国国情且具有国际视野的无机化学新的课程体系,能为国内高校本科无机化学课程的教学改革提供参考,提高其教育教学质量,促进本科人才培养。     

Assessing contaminated hydrogen peroxide for safe storage and transportation using the FTAI

Hydrogen peroxide is a very versatile oxidizing agent, and it is also environmentally compatible considering that the products of its exothermic decomposition are oxygen and water.When kept in a clean temperature-controlled environment, the self-reaction (decomposition) rate is extremely low. However, it is well known that even a small amount of contamination will dramatically increase the reaction rate. This paper describes the use of the fast thermal activity interpreter (FTAI) instrument to examine the chemical reactivity of commercially available 50% hydrogen peroxide at two different temperatures (30 and 40°C) both with and without contamination. The results show that at 30°C a small amount of rust (330 ppm) increases the reaction rate of 50% hydrogen peroxide by a factor of 50. When the temperature is increased to 40°C, the reaction rate is further increased by almost a factor of four. The implication for reactivity management is that at this contamination level most practical vessel sizes would require emergency venting capability. An evaluation was then performed to determine the emergency venting requirement for the safe transportation or storage of the contaminated hydrogen peroxide. It was determined that for quantities of the material less than 5 gallons, conventional breather vents would be sufficient to accommodate the gas evolved. However, for larger quantities, a safety relief device would be needed. For example, for a 400-gallon tote bin at 40°C the required minimum vent area is estimated to be 4.3 in², corresponding to a minimum vent diameter of 2.3 inches.     

Environmental risk assessment of pharmaceutical residues in wastewater effluents, surface waters and sediments

Pharmaceutical residues in the environment, and their potential toxic effects, have been recognized as one of the emerging research area in the environmental chemistry. The increasing attention, on pharmaceutical residues as potential pollutants, is due that they often have similar physico-chemical behaviour than other harmful xenobiotics which are persistent or produce adverse effects. In addition, by contrast with regulated pollutants, which often have longer environmental half-lives, its continuous introduction in the environment may make them “pseudopersistents”.Pharmaceutical residues and/or their metabolites are usually detected in the environment at trace levels, but, even that, low concentration levels (ng/L or μg/L) can induce to toxic effects. In particular, this is the case of antibiotics and steroids that cause resistance in natural bacterial populations or endocrine disruption effects.In this study, an overview of the environmental occurrence and ecological risk assessment of pharmaceutical residues is presented from literature data. Risk Quotient method (RQ) was applied as a novel approach to estimate the environmental risk of pharmaceuticals that are most frequently detected in wastewater effluents, surface waters and sediments.     

光伏太阳能电池生产过程中的污染问题

日益壮大的光伏产业正在为人类发展作出积极的贡献.采用光伏发电来代替传统的发电技术,将会减少89%的空气污染.然而,在这个倡导绿色环境的时代,光伏器件生产引起的环境、健康和安全（EHS）问题也日益引起社会各界的广泛关注.认清光伏产品在生产过程中污染的真相对维持光伏产业的可持续发展有着相当重要的意义.本文综述了常见太阳能电池的EHS问题,并提出了可以减少污染的有效途径;采用生命周期评估（LCA）方法进一步比较了各种太阳能电池生产过程中污染物的排放量数据.