Thermal properties of polypropylene post-consumer waste (PP PCW)

Differential scanning calorimetry has been used to study the heat flow during melting and crystallisation of a range of polypropylene post-consumer waste (PP PCW) grades and blends. The heat flow curves and the heat capacity curves indicated that the PP PCW grades and blends contained contaminants even after manual sorting and a cleaning process. The enthalpies of the PP PCW grades were lower than that for the virgin grades, as a result of degradation. Small amounts of polymeric contaminants (up to 10%) did not affect the enthalpies of PP PCW although other contaminants may have had some effect. The enthalpies of the PCW blends could in general be predicted by a linear additive rule, which is of importance for recycling a variety of PP PCW products.The authors would like to thank Dr. M. Killen (Basell Australia Pty. Ltd.), Mr. P. Slaven (Citiwide MRF), Dasma Valley Waste Prop. Ltd. and Mr. I. Janetzki (Huhtamaki Australia Ltd.) for supplying materials for this project. Financial support for the project was provided by Basell Australia and Ecorecycle Victoria, Australia.     

Detection and assessment of citrus tristeza virus antigens by computer-aided scanning densitometry

Citrus tristeza virus (CTV) extracted from Etrog citron (C.medica L.) was immunoprecipitated. The immunoprecipitate was fractionated by SDS-PAGE and western blotted onto nitrocellulose. The CTV antigens were determined by immunoblot analysis using rabbit anti-CTV IgG, and the protein-band pattern exhibited on the nitrocellulose was assessed by soft-laser scanning densitometry. The densitometric tracing revealed the presence of bands that were not visible to the naked eye. Using the superimposition mode of the instrument, it was also revealed that the protein-band patterns of different CTV samples were not identical. Computer-aided soft-laser scanning densitometry proved to be a powerful approach in the detection and assessment of protein bands revealed on nitrocellulose immunoblots, which we were previously unable to do employing conventional methods.     

四川省重点河段水环境安全性评价

为研究四川省重点河段水环境的安全性,利用综合评价指数法和模糊综合评价决策的数学模型对主要水系干流和支流河段的水质安全性做出了评价.结果显示,岷江流域的水质安全性较差,主要的污染物为重金属汞和铁,沱江和涪江流域的水质安全性较好.     

Environmental and economic comparison of waste solvent treatment options

The sustainable development and consumption need more efficient use of natural resources. As a consequence, the use of industrial solvents demands their recovery instead of end-of-pipe treatment. It is not always clear, however, which treatment alternative should be applied. Based on an industrial case study, the environmental and economic evaluation and comparison of the treatment alternatives of a non-ideal solvent mixture containing azeotropes is investigated for determining the preferable option. For the recovery of the industrial solvent mixture, two different separation alternatives are evaluated: a less effective alternative and a novel design based on hybrid separation tools. An end-of-pipe treatment alternative, incineration, is also considered and the split of the solvent mixtures between recovery and incineration is investigated. The environmental evaluation of the alternatives is carried out using ‘Eco-indicator 99 life-cycle impact assessment methodology’. Economic investigation is also accomplished. The economic features clearly favour the total recovery, however, the environmental evaluation detects that if a recovery process of low efficiency is applied, its environmental burden can be similar or even higher than that of the incineration. This motivates engineers to design more effective recovery processes and reconsider the evaluation of process alternatives at environmental decision making.     

Rapid dissolution procedure for base-metals-bearing complex materials for quality control assessment

A less labour-intensive method, involving a mixture of 1.0 g MnO₂ + 20 mL HCl (11), is proposed for decomposing seven ores and six metallurgical products for accurate and precise estimation of copper, lead, zinc, cobalt and nickel for quality control assessment. Twentyone international reference materials were also analysed. Results of regression analyses are presented and intermethod comparison studies reveal that the probability of results being different compared with a reference method was less than 1%. Sample decomposition is straightforward and the method has been found to be very simple, rapid and easily adaptable, as it involves no separation of the analyte from the matrix elements.     

Study of Tea Digitized Chromatographic Fingerprint Spectra Using Micellar Electrokinetic Chromatography

IntroductionTeaisthemostwidelyconsumedbeverageinpeople’slife .Theheightenedpopularityofthisbeveragethroughouttheworldinrecentyearsmaybedueinparttotheevidenceofarelationshipbetweenteaconsumptionandpreventionofcertainformsofhumandisease .Themaincomponentsofteaarepolyphenoliccompounds ,commonlyknownascatechins ,whichrepresentagroupofcom poundsbelongingtotheflavonoidfamily .Thesecom poundsarewidelydistributedinthetealeavesandconsti tuteupto 30 %ofthedryleafweight.1Muchinteresthasbeenfocusedoncat…     

Controlling the quality of testing

 This article mainly focuses on the testing of products, materials, etc., but the general principles are applicable in a broader perspective. Quality of testing should be judged based on fitness for purpose. This judgement includes both objective and subjective elements. The possibility to make decisions and other professional judgements based on test results alone is discussed and compared with the decisions and judgements being made through the certification and inspection process. Quality, including the uncertainty of the test results, depends on many factors, and in order to make necessary improvements in the testing procedures based on the customers' needs, the right issues should be addressed. The question arises as to whether, in laboratories' quality systems and in the accreditation and certification process, attention is really paid to those factors that are crucial to obtaining reliable results.     

化学模式识别技术评价中药厚朴质量的研究

本文对不同产地和市售的二十四种厚朴药材及饮片的萃取液进行了高效液相色谱、气相色谱及紫外光谱分析;对所得数据用主成分分析进行分类,概括出不同样品化学成分的异同,认为大叶木兰可做为厚朴的代用品,而在陕西安康购得的样品不应做厚朴使用,后者经生药学鉴定为厚朴伪品凹叶木兰。化学模式识别技术可为寻找药材的代用品、评价中药质量及鉴定伪劣药材提供依据。     

Some aspects of quality assessment of the k0-based method of NAA

Neutron activation analysis is one of the analytical techniques often used for certification of reference materials. The k₀-based method of instrumental neutron activation analysis can also be applied in intercomparison runs in the certification process and therefore it is desirable to know its accuracy in advance. Possible systematic errors related to the application of nuclear data at given neutron flux rate parameters, that can affect the uncertainties of the results obtained by this specific method, are elucidated and error propagation factors calculated for a typical irradiation position in the TRIGA Mark II reactor of the Jozef Stefan Institute. It was found that these uncertainties are at the level of 1–2% on the average.     

Development of a multicriteria assessment model for ranking biomass feedstock collection and transportation systems

This study details multicriteria assessment methodology that integrates economic, social, environmental, and technical factors in order to rank alternatives for biomass collection and transportation systems. Ranking of biomass collection systems is based on cost of delivered biomass, quality of biomass supplied, emissions during collection, energy input to the chain operations, and maturity of supply system technologies. The assessment methodology is used to evaluate alternatives for collecting 1.8×10⁶ dry t/yr based on assumptions made on performance of various assemblies of biomass collection systems is based on cost of delivered biomass, quality of biomass supplied, emissions during collection, energy input to the chain operations, and maturity of supply system technologies. The assessment methodology is used to evaluate alternatives for collecting 1.8×10⁶ dry t/yr based on assumptions made on performance of various assemblies of biomass collection systems. A proposed collection option using loafer/stacker was shown to be the best option followed by ensiling and baling. Ranking of biomass transport systems is based on cost of biomass transport, emissions during transport, traffic congestion, and maturity of different technologies. At a capacity of 4×10⁶ dry t/yr, rail transport was shown to be the best option, followed by truck transport and pipeline transport, respectively. These rankings depend highly on assumed maturity of technologies and scale of utilization. These may change if technologies such as loafing or ensiling (wet storage) methods are proved to be infeasible for large-scale collection systems.