低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。     

A Simple Route to Produce Highly Efficient Porous Carbons Recycled from Tea Waste for High-Performance Symmetric Supercapacitor Electrodes

High-performance porous carbons derived from tea waste were prepared by hydrothermal treatment, combined together with KOH activation. The heat-treatment-processed materials possess an abundant hierarchical structure, with a large specific surface of 2235 m² g⁻¹ and wetting-complemental hydrophilicity for electrolytes. In a two-electrode system, the porous carbon electrodes’ built-in supercapacitor exhibited a high specific capacitance of 256 F g⁻¹ at 0.05 A g⁻¹, an excellent capacitance retention of 95.4% after 10,000 cycles, and a low leakage current of 0.014 mA. In our work, the collective results present that the precursor crafted from the tea waste can be a promising strategy to prepare valuable electrodes for high-performance supercapacitors, which offers a practical strategy to recycle biowastes into manufactured materials in energy storage applications.     

CO2氧化异丁烷制异丁烯用Pd/V2O5-SiO2催化剂

 利用表面化学反应改性法制备了不同V2O5负载量的V2O5-SiO2表面复合物载体,进而采用等体积浸渍法制备了负载型Pd催化剂. 用N2吸附、 X射线衍射、透射电镜、 X射线光电子能谱、程序升温脱附、化学吸附-红外光谱和微反技术对系列Pd/V2O5-SiO2催化剂的比表面积、晶相结构、价态、异丁烷的化学吸附性能和CO2部分氧化异丁烷制异丁烯的催化性能进行了研究. 结果表明, Pd/V2O5-SiO2催化剂中的钒以V5+形式存在, V5+在催化剂表面形成活性位V=O, 其中 V=O 晶格氧与 i-C4H10分子的-CH3 和-CH 中的H产生化学吸附作用; 催化剂中金属Pd与V4+协同作用使CO2在催化剂上产生了卧式吸附态; 晶格氧参加了催化氧化反应,催化剂中 V5+←→V4+ 的变化构成了催化反应的氧化还原过程. 在525 ℃, CO2/i-C4H10体积比为1和空速为 1200 h-1的条件下,以Pd/25%V2O5-SiO2为催化剂时异丁烷转化率为22.8%, 异丁烯选择性为89.1%.     

Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

Ultrathin MnO2 nanosheets grown on hollow carbon spheres with enhanced capacitive performance

Ultrathin MnO₂ nanosheets grown on the surface of hollow carbon spheres (MnO₂/HCSs) were fabricated by the redox reaction between carbon spheres with KMnO₄ in aqueous solution. Due to the porous structure and large amounts of active sites, MnO₂/HCSs exhibit excellent capacitive performance with 227.5 F g⁻¹ at 1 A g⁻¹. After 5000 cycles, the capacity retention of MnO₂/HCSs remains 96%, indicating its good cycling stability. These results demonstrate that MnO₂/HCSs are promising supercapacitor electrode material and this work provide a facile method for growth of ultrathin MnO₂ nanosheets on carbon substrate.     

浮升力和流动加速对超临界CO2管内流动传热影响

基于单相流体的概念,超临界流体的异常传热行为已经被研究很多年了,但是关于其流动传热机理仍没有统一的认识.本文通过理论分析和实验研究了超临界二氧化碳在竖直管内向上流动过程中,浮升力和流动加速效应对其流动结构和传热过程的影响.结果表明,没有确凿的实验证据表明超临界流体的异常传热行为是浮升力和流动加速直接导致的,存在的估计浮升力和流动加速效应准则均是在常物性流体的基础上,做了大量假设得出的,不同的研究者采用浮升力和流动加速准则分析超临界流体的传热恶化得出的结论不一致.最后,基于拟沸腾理论分析超临界流体的传热恶化过程,提出超临界沸腾数区分了超临界流体正常传热与恶化传热的转换边界,为超临界流体流动传热研究提供新思路,超临界沸腾数对建立用于不同技术的超临界流体动力循环的最佳运行条件具有重要意义.     

碳纳米管的可控长度拾取及导电性分析

拾取指定长度的半导体性碳纳米管对大规模制造碳纳米管场效应管具有重要意义.本文提出了一种利用原子力显微镜探针和钨针对碳纳米管进行可控长度拾取的方法并进行了碳纳米管导电性分析.在扫描电子显微镜下搭建微纳操作系统,针对切割操作过程中原子力显微镜探针、钨针和碳纳米管的接触情况进行了力学建模和拾取长度误差分析.建立了单根金属性碳纳米管、单根半导体性碳纳米管及碳纳米管束与钨针接触的电路模型,推导了接入不同性质碳纳米管后电路的电流电压特性方程.使用原子力显微镜探针对碳纳米管的空间位姿进行调整,控制钨针对碳纳米管上目标位置进行通电切割,同时获取切割电路中的电流电压数据.实验结果表明,本文提出的方法能够有效控制所拾取碳纳米管的长度,增加碳纳米管与原子力显微镜探针的水平接触长度能够减小碳纳米管形变导致的拾取长度误差,建立的电流电压特性方程能够用于分析碳纳米管的导电性.     

碳量子点/曙红Y比率型荧光探针测定L-抗坏血酸

以天然生物质去皮的蓖麻为碳源,采用一步水热法合成了荧光性能优良的绿色荧光蓖麻碳量子点(CO-CQDs),对其形貌和发光性能进行了表征。通过将该CO-CQDs与荧光极强的卤代荧光素染料曙红Y(EY)复合,二者可形成荧光发射峰相距较远的新型CO-CQDs/EY复合物。在pH=4.00的Na2HPO4-柠檬酸缓冲溶液中,在320 nm的激发波长下,CO-CQDs/EY复合物于405 nm和540 nm处显示出两个独立的荧光发射峰。在该体系中加入Cr(Ⅵ),405 nm和540 nm两处的荧光信号均显著猝灭。L-抗坏血酸(L-ascorbic acid,AA)的加入可使复合物于540 nm的荧光信号恢复,而405 nm处的荧光强度基本不变。据此建立了一种以CO-CQDs/EY复合物为比率型荧光探针测定AA的新方法。实验测定了荧光信号恢复的最佳条件和影响荧光恢复的因素,初步探讨了反应机理。在优化的实验条件下,该探针于540 nm/405 nm两处的荧光强度比值与AA的浓度在5.0×10^-8~4.0×10^-6 mol/L范围内呈良好线性关系,检出限为3.7×10^-8 mol/L。该探针用于检测药物、水果和蔬菜中AA的含量,结果满意。     

Dynamic and buckling analysis of polymer hybrid composite beam with variable thickness

This work deals with a study of the dynamic and buckling analysis of polymer hybrid composite(PHC) beam. The beam has variable thickness and is reinforced by carbon nanotubes(CNTs) and nanoclay(NC) simultaneously. The governing equations are derived based on the first shear deformation theory(FSDT). A three-phase HalpinTsai approach is used to predict the mechanical properties of the PHC. We focus our attention on the effect of the simultaneous addition of NC and CNT on the vibration and buckling analysis of the PHC beam with variable thickness. Also a comparison study is done on the sensation of three impressive parameters including CNT, NC weight fractions, and the shape factor of fillers on the mechanical properties of PHC beams,as well as fundamental frequencies of free vibrations and critical buckling load. The results show that the increase of shape factor value, NC, and CNT weight fractions leads to considerable reinforcement in mechanical properties as well as increase of the dimensionless fundamental frequency and buckling load. The variation of CNT weight fraction on elastic modulus is more sensitive rather than shear modulus but the effect of NC weight fraction on elastic and shear moduli is fairly the same. The shape factor values more than the medium level do not affect the mechanical properties.     

Entropy of higher-dimensional charged Gauss–Bonnet black hole in de Sitter space

The fundamental equation of the thermodynamic system gives the relation between the internal energy, entropy and volume of two adjacent equilibrium states. Taking a higher-dimensional charged Gauss–Bonnet black hole in de Sitter space as a thermodynamic system, the state parameters have to meet the fundamental equation of thermodynamics. We introduce the effective thermodynamic quantities to describe the black hole in de Sitter space. Considering that in the lukewarm case the temperature of the black hole horizon is equal to that of the cosmological horizon, we conjecture that the effective temperature has the same value. In this way, we can obtain the entropy formula of spacetime by solving the differential equation. We find that the total entropy contains an extra term besides the sum of the entropies of the two horizons. The corrected term of the entropy is a function of the ratio of the black hole horizon radius to the cosmological horizon radius, and is independent of the charge of the spacetime.