Vibration control of nonlinear Absorber–Isolator-Combined structure with time-delayed coupling

A nonlinear combined structure consisted of isolator and absorber with time-delayed coupling active control is proposed in this study, whose vibration suppression effectiveness and control mechanism are investigated. The mathematical model of the combined structure is obtained and stability analysis for different structural parameters and time delay are firstly carried out, which provides a general guideline for the ranges of active control parameters. Then the combined effect of nonlinearity and time delay on vibration suppression and energy transfer is discussed in details based on the analysis of control mechanism by the method of multiple scales. Since the time-delayed nonlinear absorber can induce internal resonance between different modes, the vibration energy at low frequencies can be transferred to high frequency mode and the vibration of the fundamental frequency range is thus suppressed. This paper provides a novel application of internal resonance in vibration suppression of an Absorber–Isolator-Combined structure.     

On crack propagation in a coupled thermomechanical system of nonlinear media

In some engineering problems.thermo-mechanical coupling is im-portant and may not be ignored.This paper deals With the crackpropagation problem in a coupled thermo-mechanical system of non-linear media.Various nonlinear media.including nonlinear e-lastic and elastic-plastic cases,have been considered and therelated path-independent integrals are given.To explain thephysical meaning of these integrals,a notched specimen hasbeen considered.and the dynamical crack extension force in acoupled thermo-mechanical system is shown to be equal to thisintegral.Thus.we could consider such integrals as some non-linear criteria for coupled thermo-mechanical fracture dynamics.     

给水加热型联合循环的变工况性能

在联合循环改造的各种方案中,给水加热型具有投资少、改动少、耗用优质燃料较少、尤其是简单易行及技术难度小等特点,因此在我国现有的技术经济水平、特别是以煤为主的国情下,有一定应用市场。本文分析比较了多种变工况运行方式的性能及可能出现的问题,并在此基础上提出综合性能较好的运行模式。     

Study on Combined Method Based on 3-D ESPI

The finite element method (FEM),whether the calculation is accurate or not,depends closely on object boundary condition.If the three dimensional displacement of the object obtained in experiment is regarded as its boundary condition,a new method combining the results of experiment and calculation,called combined method (CM),is formed.The combined method possess advantages of experiment and calculation.It can correct calculation and improve the accuracy of FEM.Accordingly it has more practicability.In this paper,the three dimensional displacement fields of a typical beam loaded at three points are tested by using 3-D electric speckle pattern interferometry (ESPI).Using the experimental results as boundary condition the whole three-dimensional displacement fields can be calculated by FEM.The beam′s three-dimensional displacement fields obtained by FEM agree very well with those obtained by experiment.This proves that the combined method is effective and practicable.     

考虑专家水平的土木工程质量综合评估模型

应用加权集值统计、属性数学和最小方差等方法 ,建立了考虑专家水平的量化综合评估模型 ,对土木工程质量进行多目标多人的综合评估 ,并给出计算实例 .     

碳纤维布与钢板复合加固梁剥离破坏研究

通过12根碳纤维布与钢板复合加固钢筋混凝土梁的抗弯性能研究,结果表明复合加固方式能有效地改善被加固构件的受力性能,但常由于复合加固层的剥离可能导致加固效果的降低。复合加固层与被加固构件之间的剥离是由于薄弱截面在剪应力及正应力的集中作用下而产生的,文中对复合加固层与混凝土之间的粘结剪应力及剥离正应力的计算公式分别进行推导,并进一步对碳纤维布与钢板复合加固的剥离机理进行分析,为工程应用提供依据。     

Heat transfer from a vertical tube bundle under natural circulation conditions

A rectangular loop (thermosyphon) was used to measure the average heat transfer coefficients for water at atmospheric pressure under natural circulation conditions. A twenty-one tube bundle with tubes 1.65 m long and 9.55 mm in diameter, and a pitch-to-diameter ratio of 1.33, was used as a test heat exchanger in one of the vertical legs of the loop. A natural circulation flow in the loop developed due to buoyancy differences of the fluid in its two vertical legs. Flow visualization experiments were performed to determine the flow regimes associated with natural circulation flow longitudinal to a tube bundle. Empirical correlations for the average Nusselt number have been developed and are reported. Grid spacers arranged on tube bundles were shown to enhance heat transfer, especially for laminar flow, without any noticeable increase in pressure drop.