Effect of Poly(methacrylic acid) on the Cytokine Level in an In Vivo Tumor Model

Cancer is a leading cause of mortality globally. Despite remarkable improvements in cancer-treatment approaches, disease recurrence and progression remain major obstacles to therapy. While chemotherapy is still a first-line treatment for a variety of cancers, the focus has shifted to the development and application of new approaches to therapy. Nevertheless, the relationship between immune response, neoplastic diseases and treatment efficiency is not fully understood. Therefore, the aim of the study was to investigate the immunopharmacological effects of methacrylic acid homopolymer in an in vivo tumor model. Materials and methods: Monomeric methacrylic acid was used to synthesize polymers. Methacrylic acid was polymerized in dioxane in the presence of 4-Cyano-4-[(dodecylsulfanylthiocarbonyl)sulfanyl]pentanoic acid. To study the molecular weight characteristics of PMAA by GPC, carboxyl groups were preliminarily methylated with diazomethane. An experimental cancer model was obtained by grafting RMK1 breast cancer cells. The serum levels of IL-6, IL-10, IL-17, transforming growth factor β1 (TGF-β1), and tumor necrosis factor α (TNF-α) were measured by ELISA. Results: The effect of PMAA on the serum concentrations of several cytokines was studied upon its single administration to laboratory animals in early neoplastic process. The IL-6, IL-17 and TGF-β1 concentrations were found to change significantly and reach the level observed in intact rats. The IL-10 concentration tended to normalize. Conclusion: The positive results obtained are the basis for further studies on the effect of methacrylic-acid polymers with different molecular-weight characteristics on the neoplastic process.     

An Encryption Algorithm for Region of Interest in Medical DICOM Based on One-Dimensional eλ-cos-cot Map

Today, with the rapid development of the Internet, improving image security becomes more and more important. To improve image encryption efficiency, a novel region of interest (ROI) encryption algorithm based on a chaotic system was proposed. First, a new 1D eλ-cos-cot (1D-ECC) with better chaotic performance than the traditional chaotic system is proposed. Second, the chaotic system is used to generate a plaintext-relate keystream based on the label information of a medical image DICOM (Digital Imaging and Communications in Medicine) file, the medical image is segmented using an adaptive threshold, and the segmented region of interest is encrypted. The encryption process is divided into two stages: scrambling and diffusion. In the scrambling stage, helical scanning and index scrambling are combined to scramble. In the diffusion stage, two-dimensional bi-directional diffusion is adopted, that is, the image is bi-directionally diffused row by column to make image security better. The algorithm offers good encryption speed and security performance, according to simulation results and security analysis.     

相干光脉冲位置调制信道容量及传信率最大化研究

分析了相干光脉冲位置调制的信道容量及传信率最大化条件.通过分析光外差接收的脉冲位置调制信号具有的概率分布特性,推导出采用最大似然检测的相干脉冲位置调制信道具有的转移概率矩阵和信道容量,证明在检测器散粒噪声极限假设下,信道容量只取决于接收脉冲能量和脉冲位置调制阶数.利用Jensen不等式化简信道容量得到其下限,该下限能够近似实际通信链路的信道容量.基于此估计出达到最高传信率时的脉冲位置调制阶数同粒子数反转的重建时间之间的关系,给出了二者在一定范围内的一般映射.数值仿真表明,在接收能量使信道误码率优于10-2时,估箅出的脉冲位置调制阶数能够使传信率接近最大值.     

离焦激光直写的线宽稳定方法

为了提高激光直写加工衍射光学元件时的线条质量,提出一种离焦激光直写的线宽稳定方法.该方法通过同时调节激光功率和离焦量,使光刻胶的曝光阈值处于线宽对曝光量的变化率较小位置,从而可以弱化线宽对实际曝光量或光刻胶阈值等变化的敏感度,提高利用离焦方法进行衍射光学元件制作时的线宽稳定性.推导了稳定线宽后的光功率控制模型和线宽模型,模型中的变量仅为离焦量,降低了光功率控制的复杂性.利用632.8 nm的He-Ne激光和NA-0.1的物镜在CCD上对采用该方法后的离焦线宽模型进行验证,实验结果与理论模型吻合较好.该方法对于线宽稳定度较高的衍射光学元件制作具有重要价值.     

格兰-汤普森棱镜胶合层的膜效应分析

将格兰-汤普森棱镜两半块之间的光学胶合层作为一层薄膜,利用薄膜光学理论,分析了胶合层对棱镜透射比的影响。通过研究胶合层的厚度以及光学胶折射率对入射光在胶合界面上反射率的影响,得出了s偏振光经过格兰-汤普森棱镜后的透射比。结果表明：胶合层的厚度以及光学胶折射率对棱镜的透射比均有影响,且厚度对棱镜透射比的影响呈现周期性变化;而光学胶折射率则对透射比的振荡幅度产生影响。以长度孔径比为3的格兰-汤普森棱镜为例,光学胶折射率为1．510时,棱镜的透射比在92．5％～90．8％之间振荡;光学胶的折射率在接近e光主折射率1．475～1．495之间取值时,棱镜透射比的振荡幅度较小。这一结果有利于对格兰-汤普森棱镜性能的优化。     

An FEM approximation for a fourth-order variational inequality of second kind

A fourth-order variational inequality of the second kind arising in a plate frictional bending problem is considered. By using regularization method, the original problem can be formulated as a differentiable variational equation, and the corresponding discrete FEM variational equation is presented afterwards. Abstract error estimates and error estimates of the approximation are derived in terms of energy norm and L^2-norm.     

Drift of Spiral Waves in Complex Ginzburg-Landau Equation

The spontaneous drift of the spiral wave in a finite domain in the complex Ginzburg-Landau equation is investigated numerically. By using the interactions between the spiral wave and its images, we propose a phenomenological theory to explain the observations.     

Volume Effect of Bound States in Quark-Gluon Plasma

Bound states, such as qq and q(q), may exist in quark-gluon plasma. As the system is at high density,the volume of the bound states may evoke a reduction in the phase space. We introduce an extended bag model to investigate qualitatively the volume effect on the properties of the system. We find a limit temperature where the bound states start to be completely melted.     

DMF体系中Cu2O球晶的制备及形貌分析

以N,N-二甲基甲酰胺(DMF)为溶剂,通过改变铜源和表面活性剂,调控反应参数,溶剂热条件下制备了三维十字形、空心及实心的Cu₂O球晶。利用XRD、SEM等表征手段,分析探讨了工艺条件变化对Cu₂O球晶形貌的影响。研究表明,随着DMF浓度的增大,体系的还原能力增强,Cu⁺增多,溶液的过饱和度增大,Cu₂O晶体集合体形态由晶体结构控制的各向异性与对称性的球晶逐渐向各向同性球晶演变。十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、聚乙烯吡咯烷酮(PVP)等表面活性剂有助于降低溶液的过饱和度,增加结晶质的表面扩散能力,有利于规则形态Cu₂O晶粒的形成。反应体系中,Cu(Ac)₂·H₂O水解生成的羧基与DMF中的甲酰基在高温下发生脱羧反应产生CO₂气体以及SDS发泡作用产生的气体是形成空心Cu₂O球晶的重要原因。