太阳能电池基本特性测定实验 --一个与能源利用有关的综合设计性实验

“太阳能电池基本特性测定”是与能源利用有关的新的综合性设计实验．本文简述了该实验的原理、实验方法及测量结果,得出了太阳能电池基本参数短路电流Iac,开路电压Uoc与太阳能电池接收到的相对光强度J／Jn的近似函数关系。     

加速器高频D电路Q值的计算与测量

 介绍了回旋加速器高频单D型盒D电路Q值的计算与测量方法。重点对Q值的理论计算进行推导，并对计算原理进行说明。然后对计算结果和测量结果进行比较。得出的计算和测量结果基本吻合。误差产生的主要原因是计算过程中的近似和短路片接触电阻的取值，其中短路片接触电阻是一个重要因素，在设计腔体时应引起足够的重视。     

Simple and universal method in designs of high-efficiency diffractive optical elements for spectrum separation and beam concentration

Diffractive optical elements(DOEs) with spectrum separation and beam concentration(SSBC) functions have important applications in solar cell systems. With the SSBC DOEs, the sunlight radiation is divided into several wave bands so as to be effectively absorbed by photovoltaic materials with different band gaps. A new method is proposed for designing high-efficiency SSBC DOEs, which is physically simple, numerically fast, and universally applicable. The SSBC DOEs are designed by the new design method, and their performances are analyzed by the Fresnel diffraction integral method.The new design method takes two advantages over the previous design method. Firstly, the optical focusing efficiency is heightened by up to 10%. Secondly, focal positions of all the designed wavelengths can be designated arbitrarily and independently. It is believed that the designed SSBC DOEs should have practical applications to solar cell systems.     

Sensitive linear response of an electron-hole superfluid in a periodic potential

We consider excitons in a two-dimensional periodic potential and study the linear response of the excitonic superfluid to an electromagnetic wave at low and high densities. It turns out that the static structure factor for small wavevectors is very sensitive to a change of density and temperature. It is a consequence of the fact that thermal fluctuations play a crucial role at small wavevectors, since exchanging the order of the two limits, zero temperature and vanishing wavevector, leads to different results for the structure factor. This effect could be used for high accuracy measurements in the superfluid exciton phase, which might be realized by a gated electron-hole gas, for instance, in coupled quantum wells or double layer materials. The transition of the exciton system from the superfluid state to a non-superfluid state and its manifestation by light scattering are discussed.     

基于宽度可调节的线缺陷平板型光子晶体的空气槽微腔

研究了一种空气槽光子晶体微腔,这种腔是由在平板型光子晶体上引入一条宽度可以调节的线缺陷空气槽形成的.腔模的电场被强烈局限在空气槽中,由于介电常量的不连续性,电场得到很大的提高,同时模体积被大大地降低.数值模拟与分析了微腔的能带结构和场分布,考虑到腔模的谐振频率和对称性,发现一阶偶膜同时具有较高的品质因子和较小的模体积;应用有限时域差分法,得到腔模的品质因子可以高达10⁶,模体积仅为0.02(λ/n)³.计算了一阶偶模谐振波长随空气槽宽度以及空气孔半径的变化,发现随着宽度的增加,波长越来越短.而随着空气孔半径的增加,波长近似线性地减小;当空气孔半径为170 nm时,可以获得最高的腔品质因子.     

抽运光与信号光的光强重叠因子和掺铒玻璃波导放大器的增益特性

在掺铒玻璃波导放大器（EDWA）的三能级速率-传输方程中,考虑两次离子交换工艺中波导掩模窗口宽度w不同所导致的抽运光、信号光模场与光强分布的不同,讨论不同w对EDWA增益特性的影响,得到光强分布的数值解.引入描述波导中抽运光和信号光的归一化光强重叠因子,对EDWA的传统近似解提出修正,得到了修正解,使其更加接近光强分布的数值解.模拟结果表明,在条波导长度为4 cm、抽运光波长为980 nm、功率为80 mW、信号光波长为1534 nm、功率为-10 dBm条件下,不同w所导致EDWA的增益差别可达297 dB.修正解的结果比传统近似解更加接近光强分布的数值解.修正解对于EDWA的理论研究、器件设计具有指导作用. 关键词： 集成光学 掺铒玻璃波导放大器 重叠积分因子 增益     

Analysis on electrical characteristics of high-voltage GaN-based light-emitting diodes

<正>In order to investigate their electrical characteristics,high-voltage light-emitting-diodes(HV-LEDs) each containing four cells in series are fabricated.The electrical parameters including varying voltage and parasitic effect are studied. It is shown that the ideality factors(IFs) of the HV-LEDs with different numbers of cells are 1.6,3.4,4.7,and 6.4.IF increases linearly with the number of cells increasing.Moreover,the performance of the HV-LED with failure cells is examined.The analysis indicates that the failure cell has a parallel resistance which induces the leakage of the failure cell.The series resistance of the failure cell is 76.8Ω,while that of the normal cell is 21.3Ω.The scanning electron microscope(SEM) image indicates that different metal layers do not contact well.It is hard to deposit the metal layers in the deep isolation trenches.The fabrication process of HV-LEDs needs to be optimized.     

光纤分布式测温系统中基于迭代法的高准确度温度解调算法

提出了一种利用喇曼散射原理的光纤分布式测温系统中基于迭代的高准确度温度解调算法.针对于常规的反斯托克斯-斯托克斯双光路比值的温度解调算法,该迭代算法进一步校正了光纤中双光路衰减系数差对温度敏感带来的温度测量误差,尤其适用于中距离且温度场复杂的测温环境,实现了高准确度的温度测量.通过理论分析确定了该迭代法的迭代格式,测量了相应的光纤参量,并在传感样机上编写相应的代码通过实验予以验证,在0～90℃温度范围,5km测量长度输出的测温曲线符合预期的测温效果.     

Resonantly enhanced strip-line technique to measure microwave permeability of thin films

The sensitivity of a reflective single-port strip-line technique is increased by 10-20 times by amplification of a measured reflectivity response at a set of resonance frequencies. The resonant behavior is organized by connecting the strip cell to a network analyzer through a capacitor with a long coaxial cable. The capacitance defines the amplification; the cable length defines the resonance frequencies. S-parameters of the coaxial-to-strip junction and the field inhomogeneity inside the cell are accounted for by a reference measurement of sample with known constitutive parameters. Two methods for permeability calculation are suggested. The fist method is based on the comparison of Lorentzian parameters of resonance reflectivity curves. The second method is based on numerical solution of Fresnel's equation. The enhancement is essential at low-frequency part of the band, where the cell reflectivity is close to unity and the sensitivity of non-resonant technique is poor. The technique sensitivity is estimated by permeability measurements of Al stripes with different cross-section.