Grafting of hyperbranched cyclotriphosphazene polymer onto silica nanoparticle and carbon black surfaces

The surface grafting of hyperbranched cyclotriphosphazene polymer onto silica nanoparticles and carbon black was investigated. The grafting of hyperbranched cyclotriphosphazene polymer onto these surfaces was achieved by the repeated reactions of hexachlorocyclotriphosphazene with hexamethylenediamine from surface amino groups and sodium carboxylate groups, respectively. The percentage of grafting onto silica and carbon black surfaces exceeded 760 and 390%, respectively. However, it proved difficult to achieve the theoretical growth of cyclotriphosphazene polymer from these surfaces because of steric hindrance. The introduction of sulfonic acid groups was successfully achieved by the reaction of terminal chlorophosphazene groups of the hyperbranched polymer‐grafted silica and carbon black with sulfanilic acid. The content of sulfonic acid groups introduced onto silica and carbon black surfaces was 4.98 mmol/g and 5.70 mmol/g, respectively. The sulfonated cyclotriphosphazene polymer‐grafted carbon black was extremely hydrophilic, yielding stable colloidal dispersions in polar solvents. The sulfonated cyclotriphosphazene polymer‐grafted silica and carbon black showed ionic conductivity, with the conductance increasing exponentially with increasing relative humidity and temperature. This study may offer important leads in the application of silica nanoparticles and carbon black in polymeric membranes for fuel cells. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4218–4226, 2008     

Fixed point theorems of ? convex −ψ concave mixed monotone operators and applications

In this paper, ? convex −ψ concave mixed monotone operators are introduced and some new existence and uniqueness theorems of fixed points for mixed monotone operators with such convexity concavity are obtained. As an application, we give one example to illustrate our results.     

Mössbauer studies on ultraporous Fe-Oxide/SiO2 aerogel

Magnetic aerogels with very low volume density of ～0.2 g/cm³ were prepared by sol-gel method and supercritical drying. The resulting materials were monolithic and displayed high surface area. By X-ray diffraction and Mössbauer spectroscopy the crystalline phase formed inside the mesopores of the SiO₂ matrix was identified as a spinel iron oxide. Comparison of the magnetic measurements with Mössbauer spectra at various temperatures contributed to the elucidation of the magnetic state of this nanocomposite system with restricted magnetic interactions, in particular its transition to a superparamagnetic state.     

Nanoscale skeletal nickel catalysts prepared via ‘bottom up’ method

NiAl nanoparticles are of considerable importance because of interest in examining the effects of size, surface area, and composition on their physical and catalytic properties. Recently, a new method for the ‘bottom up’ wet chemical preparation of nickel aluminides has been reported. The ability to leach the aluminum from this system provides an entrance to the preparation of skeletal‐type metal catalysts similar to those produced in Raney‐type systems. Furthermore, it is believed that these nanoparticulate catalysts should provide high surface areas and high activities, while the presence of aluminum within the bulk of these catalysts provides additional stability. Here, we present the results of studies conducted on this system which compare their properties and behavior with traditional bulk Raney nickel systems. Additionally, we show that we are able to alter the properties of these nanoparticles by changing the stoichiometric ratio of nickel and aluminum. The properties of all systems have been analyzed through the use of nitrogen adsorption, X‐ray diffraction, and elemental analysis. Finally, the catalysts generated have been compared for their activity in the hydrogenation of butyronitrile. Copyright © 2002 John Wiley & Sons, Ltd.     

Poly(methyl methacrylate)/silica nanocomposite fibers by electrospinning

Uniform poly(methyl methacrylate) (PMMA)/silica nanocomposite fibers containing up to 20 wt % silica were prepared by electrospinning. The electrospun solutions were prepared by mixing a solution of PMMA in dimethyl formamide (DMF) with colloidal silica in methyl ethyl ketone (MEK). The average fiber diameter decreases from 2.49 μm to 1.69 μm when 20 wt % silica is incorporated as a result of considerably increased solution conductivity, although the solution viscosity increases significantly, which should result in opposite effect. Thinner fibers (down to 350 nm) can be obtained by changing DMF/MEK proportion and by the addition of an ammonium salt. Nano‐sized silica particles (10–40 nm) distributes homogeneously in the fibers, as revealed by transmission electron microscopy. Furthermore, the incorporation of silica nanoparticles can change the thermal properties and surface wettability of the fiber mats. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1211–1218, 2009     

Graft copolymerization onto cellulose-based filter paper and its further development as silver nanoparticles loaded antibacterial food-packaging material

The present work describes ceric ammonium nitrate (CAN) initiated graft copolymerization of acrylamide onto cellulose-based filter paper followed by entrapment of silver nanoparticles. The copolymerization was carried out in aqueous solution, containing 2 M acrylamide monomer and 16 mM N,N’-methylene bisacrylamide (MB) crosslinker. The optimum initiation time and grafting reaction temperature were found to be 15 min and 30 °C, respectively. The silver nanoparticles were loaded into grafted filter paper by equilibration in silver nitrate solution followed by citrate reduction. The formation of silver nanoparticles has been confirmed by TEM and SAED analysis. The novel nano silver loaded filter paper has been investigated for its antimicrobial properties against E.coli. This newly developed material shows strong antibacterial property and thus offers its candidature for possible use as antibacterial food-packaging material.     

Interactions between polymer-grafted particles and bare particles for biocompatibility applications

We use self-consistent field theory (SCFT) to study the interactions between a polymer-grafted spherical particle and a bare spherical particle and explore how these interaction energies depend on the radii of the two particles and the grafting density. We find that the magnitude of the interaction energies increases with the radii of both the grafted and bare particles and with increasing grafting density. We also find a universal scaling law for the interaction potential which exhibits a power-law dependence on both particle sizes, a linear dependence on grafting density, and a logarithmic dependence on interparticle distance with a range of interaction that scales with brush height. We compare our numerical results to those obtained using the Derjaguin approximation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2566–2577, 2009     

Enhancing the electrochromic characteristics of conjugated polymer with TiO2 nano‐rods

Organic soluble, oleic acid capped TiO₂ nano‐rod was well‐mixed with the electrochromic polymer: Poly‐(4,4‐dioctylcyclopenta[2,1‐b:3,4‐b′]‐dithiophene (PDOCPDT) to form TiO₂/PDOCPDT nanocompsoite. TiO₂/PDOCPDT film showed high electrochemical stability and its coloration efficiency is 1.5 times of that for pure PDOCPDT. The function of TiO₂ nano‐rods can be regarded as a dispersion agent. PDOCPDT chains in TiO₂/PDOCPDT may have a less aggregated structure and more open morphology, therefore has higher coloration efficiency. TiO₂ may also act as electron transport or temporary electron storage centers, electrons can be transferred reversibly between PDOCPDT and TiO₂ nano‐rods. TiO₂/PDOCPDT is well‐soluble in CHCl₃, large area thin films can be fabricated reproducibly simply by spin coating. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1121–1130, 2008