表面等离子共振传感器的原理与进展

表面等离子共振光谱(Surface Plasmon Resonance,SPR)是近年来得到快速发展的一门技术。它是一种无标记的、可用于实时定量检测某些固定于传感芯片上的组分与被结合物种间的绑定亲合度(binding affinity)、且可用于对相对小量物质进行检测的重要手段。由于它可方便地研究不同生物或化学物种的有关反应与动力学问题,因此具有重要的实用意义,受到广泛关注和重视。本文对有关等离子共振现象的形成及其作为敏感检测手段的机制、原理和改进等问题作了简要的介绍。     

Copper‐Polymer Nanocomposite Catalyst for Synthesis of 1,4‐Diphenylbutadiyne‐1,3

A new catalyst for cross‐coupling synthesis of 1,4‐diphenylbutadiyne‐1,3 was prepared by thermolysis of copper(II) poly‐5‐vinyltetrazolate. It presents heterogeneous catalyst, in which copper nanoparticles are supported on polymeric matrix surface. The catalyst is recovered, recycled, and shows high catalytic activity in cross‐coupling synthesis of 1,4‐diphenylbutadiyne‐1,3. The reaction proceeds in aerobic conditions at room temperature in the presence of pyridine.     

Enhancement of water barrier properties and tribological performance of hybrid glass fiber/epoxy composites with inclusions of carbon and silica nanoparticles

Water barrier properties and tribological performance (hardness and wear behavior) of new hybrid nanocomposites under dry and wet conditions were investigated. The new fabricated hybrid nanocomposite laminates consist of epoxy reinforced with woven and nonwoven tissue glass fibers and two different types of nanoparticles, silica (SiO₂) and carbon black nanoparticles (C). These nanoparticles were incorporated into epoxy resin as a single nanoparticle (either SiO₂ or C) or combining SiO₂ and C nanoparticles simultaneously with different weight fractions. The results showed that addition of carbon nanoparticles with 0.5 and 1 wt% resulted in maximum reduction in water uptake by 28.55% and 21.66%, respectively, as compared with neat glass fiber reinforced epoxy composites. Addition of all studied types and contents of nanoparticles improves hardness in dry and wet conditions over unfilled fiber composites. Under dry conditions, maximum reduction of 47.26% in weight loss was obtained with specimens containing 1 wt% carbon nanoparticles; however, in wet conditions, weight loss was reduced by 17.525% for specimens containing 0.5 wt% carbon nanoparticles as compared with unfilled fiber composites. Diffusion coefficients for different types of the hybrid nanocomposites were computed using Fickian and Langmuir models of diffusion. Copyright © 2017 John Wiley & Sons, Ltd.     

Well‐defined polyisoprene‐grafted silica nanoparticles via the RAFT process

The preparation of well‐defined polyisoprene‐grafted silica nanoparticles (PIP‐g‐SiO₂ NPs) was investigated. Surface initiated reversible addition fragmentation chain transfer (SI‐RAFT) polymerization was used to polymerize isoprene from the surface of 15 nm silica NPs. A high temperature stable trithiocarbonate RAFT agent was anchored onto the surface of particles with controllable graft densities. The polymerization of isoprene mediated by silica anchored RAFT with different densities were investigated and compared to the polymerization mediated by free RAFT agents. The effects of different temperatures, initiators, and monomer feed ratios on the kinetics of the SI‐RAFT polymerization were also investigated. Using this technique, block copolymers of polyisoprene and polystyrene on the surface of silica particles were also prepared. The well‐defined synthesized PIP‐g‐SiO₂ NPs were then mixed with a polyisoprene matrix which showed a good level of dispersion throughout the matrix. These tunable grafted particles have potential applications in the field of rubber nanocomposites. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1493–1501     

Formation of homogeneous nanocomposite films at ambient temperature via miniemulsion polymerization using graphene oxide as surfactant

A convenient and industrially scalable method for synthesis of homogeneous nanocomposite films comprising poly(styrene‐stat‐butyl acrylate) and nanodimensional graphene oxide (GO) or reduced GO (rGO) is presented. Importantly, the nanocomposite latex undergoes film formation at ambient temperature, thus alleviating any need for high temperature or high pressure methods such as compression molding. The method entails synthesis of an aqueous nanocomposite latex via miniemulsion copolymerization relying on nanodimensional GO sheets as sole surfactant, followed by ambient temperature film formation resulting in homogeneous film. For comparison, a similar latex obtained by physical mixing of a polymer latex with an aqueous GO dispersion results in severe phase separation, illustrating that the miniemulsion approach using GO as surfactant is key to obtaining homogeneous nanocomposite films. Finally, it is demonstrated that the GO sheets can be readily reduced to rGO in situ by heat treatment of the film. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2289–2297     

基于纳米金Core-satellites等离子体耦合增强效应的汞离子光纤传感器的研究

以DNA杂交双链为联接, 构建纳米金颗粒Core-satellites结构并激发等离子体耦合增强效应,利用Hg2+可与DNA中胸腺嘧啶T形成T-Hg2+-T特异性结构,研制了用于检测水中Hg2+的局域等离子体共振(LSPR)光纤传感器.待测溶液中的Hg2+能够引起富含T的DNA单链折叠,抑制DNA杂交反应,降低等离子体耦合强度,改变LSPR谐振波长.通过检测谐振波长红移变化,实现对Hg2+浓度的定量检测.本方法检测Hg2+的线性范围为5~150 nmol/L, 检出限为3.4 nmol/L (3σ). Zn2+、Mg2+、Pb2+等重金属离子对Hg2+检测无明显干扰作用.实际水样中Hg2+加样回收率为94.2%~105.4%,相对标准偏差<4.8%.     

基于光子晶体带边效应的表面增强拉曼基底

将光子晶体的带边效应与金纳米粒子的拉曼散射增强作用相结合,制备了一种新型光子晶体表面增强拉曼散射基底(PC-AuNPs),利用罗丹明B(RhB)作为报告分子,对所得基底性能进行检测.PC-AuNPs基底的制备包括3个步骤:在SiO2微球表面修饰氨基,再通过垂直沉降自组装得到蛋白石结构光子晶体(PC), 最后, 在光子晶体表面负载金纳米粒子(AuNPs).结果表明,光子晶体的带隙范围及AuNPs的负载量直接影响了PC-AuNPs基底的检测效果;以所得的PC-AuNPs基底测定RhB分子,其拉曼散射特征峰强度与浓度对数值呈现良好的线性关系,线性方程为I=1711lg[RhB(mol/L)]+15244,线性相关系数R2=0.9994,检出限为1×10-8 mol/L,表明此PC-AuNPs基底可用于目标物的定性及定量检测.本方法提高了传统拉曼散射光谱检测灵敏度,操作简单,具有良好的重现性,可为其它新型检测基底的制备提供.     

钯纳米粒子修饰的三甲氧苄啶分子印迹膜传感器的制备及其识别性能研究

采用N,N′-亚甲基双丙烯酰胺(MBA)为功能单体、钯纳米粒子为掺杂剂、马来松香丙烯酸乙二醇酯为交联剂,在玻碳电极上热聚合具有三甲氧苄啶(TMP)识别性能的钯纳米材料修饰的分子印迹传感膜.采用扫描电镜及红外光谱对合成的钯纳米材料、印迹传感膜的形貌及其结构进行了表征;采用循环伏安法(CV)、交流阻抗法(EIS)对钯纳米粒子掺杂的印迹电极与无掺杂电极的电化学性能进行了研究.结果表明,纳米粒子掺杂的印迹电极与无掺杂电极的表面形貌及电化学性能明显不同.差分脉冲伏安法(DPV)表征结果表明,TMP的浓度在5.0×10-7~4.0 ×10-3 mol/L范围内与脉冲峰电流呈良好的线性关系(R=0.9995),检出限为3.2×10-8 mol/L (S/N=3).此钯纳米粒子掺杂的印迹传感器具有较高的灵敏度.即时电流测定结果表明,新诺明(SMZ)、磺胺嘧啶(SDZ)、葡萄糖 (Glu)、尿素 (Urea)对三甲氧苄啶(TMP)的测定不产生干扰.将此印迹传感器用于实际样品中TMP的检测,加标回收率为96.8%~102.0%.     

基于柑橘皮渣纳米多孔碳分散固相萃取-气相色谱法 测定果蔬中14种有机磷农药残留

以废弃柑橘皮渣为碳源,通过ZnCl2活化后高温煅烧制备了纳米多孔碳材料(NPC),将其作为吸附剂,建立了分散固相萃取净化、气相色谱法测定果蔬中有机磷农药残留的方法.扫描电子显微镜(SEM)、X射线衍射(XRD)、傅立叶红外光谱(FT-IR)、拉曼光谱及氮气吸附分析(BET)等表征显示,NPC是无定形的多孔碳材料,孔径大小为0~15 nm,比表面积和孔体积分别为1243 m2/g和1.28 cm3/g.以果蔬中14种有机磷类农药为分析对象,考察了吸附剂的用量和净化时间,并将NPC与商业化材料N-丙基乙二胺(PSA)、十八烷基硅胶键合相(C18)和石墨化碳黑(GCB)进行了对比.结果表明,NPC最佳使用量为0.01 g,净化时间只需2 min.NPC成本远低于C18、PSA和GCB,因具有丰富的孔道结构,NPC净化效果显著优于3种商业化材料.在最优条件下,14种有机磷农药在0.02~1.0 mg/L范围内的线性关系良好(R2>0.99),检出限(S/N=3)为0.63~5.30μg/kg.3个添加水平下的平均回收率为71.3%~114.7%,相对标准偏差(RSD)为0.9%~12.9%.本方法操作简便、快速、成本低,在果蔬样品前处理中具有广阔的应用前景.     

基于还原石墨烯/纳米银复合材料的电化学传感器测定双酚A

石墨烯特有的褶皱层状结构以及银纳米粒子良好的催化性能,使其在电化学方面具有良好的应用潜能.本研究以柠檬酸钠为还原剂,通过水热反应原位制备出还原石墨烯/纳米银复合材料(rGO/AgNPs),用于修饰玻碳电极,研究了双酚A的电化学行为.循环伏安法(CV)和方波伏安法(SWV)的实验结果表明,双酚A可以在rGO/AgNPs修饰电极表面发生快速的氧化还原反应,基于此实现了对双酚A的高灵敏检测.在最优条件下,双酚A的氧化峰电流与其浓度在0.1~40.0μmol/L范围内呈良好的线性关系(r2=0.996),检出限为50.7 nmol/L(S/N=3).将其用于实际环境和塑料样品中双酚A的检测,回收率为91.7%~102.9%.