Cooling crystallization of aluminum sulfate in pure water modulated by sodium dodecylbenzenesulfonate

This study investigated the cooling crystallization of aluminum sulfate to explore the basic data for the recovery of aluminum resources from coal spoil. Cooling crystallization process of aluminum sulfate with sodium dodecylbenzenesulfonate (SDBS) was investigated experimentally. The effects of operating conditions, namely rotate speed and cooling rate on the crystal size (Median diameter, D_0.5) were studied. Based on single factor experimental results, the response surface method (RSM) with a Box–Behnken design (BBD) was used to determine the key operating conditions, from which a predictive equation was established to quantitatively describe the relationships of D_0.5 and there relative parameters. The optimum operating conditions for cooling crystallization of aluminum sulfate were as follows: rotate speed of 200–300 rpm, cooling rate of 4–5 °C /min and n (SDBS)/n (Al₂(SO₄)₃) of around 5E‐4. Molecular dynamics (MD) results reveal that SDBS decreases the diffusion coefficient (D) of Al³⁺ molecules, which inhibits nucleation and promotes crystal growth.     

PET Imaging of Bacterial Infections with Fluorine‐18‐Labeled Maltohexaose

A positron emission tomography (PET) tracer composed of ¹⁸F‐labeled maltohexaose (MH¹⁸F) can image bacteria in vivo with a sensitivity and specificity that are orders of magnitude higher than those of fluorodeoxyglucose (¹⁸FDG). MH¹⁸F can detect early‐stage infections composed of as few as 10⁵ E. coli colony‐forming units (CFUs), and can identify drug resistance in bacteria in vivo. MH¹⁸F has the potential to improve the diagnosis of bacterial infections given its unique combination of high specificity and sensitivity for bacteria.     

Investigation of dense slurry suspensions with coaxial mixers: Influences of design variables through tomography and mathematical modelling

The coaxial mixers enhance the suspension of concentrated slurries in an agitated reactor. In this research work, the complex slurry suspension and dissemination behavior in a coaxial slurry mixing system (comprised of a close clearance anchor rotating with a low speed and an inner axial impeller rotating with a high speed) was analyzed employing ERT (electrical resistance tomography, a non-intrusive flow visualization technique), and computational fluid dynamics (CFD). The numerical models were validated by comparing the axial solid concentration profiles generated using the ERT data and the CFD simulation results. The influences of various important parameters such as the diameter of the inner axial impeller, the inner impeller type, and the inner impeller spacing on the hydrodynamic characteristics of the slurry suspensions in a coaxial mixing vessel were thoroughly analyzed. The radial and axial velocity profiles of solid particles were generated using the validated mathematical models. The assessment of energy loss due to the solid–solid collisions, the particle–fluid frictions, and the particle–vessel wall collisions was conducted. The evaluation of optimum inner impeller clearance and inner impeller diameter is essential to attain a high degree of solids suspension and dissemination in a coaxial slurry mixing system.     

使用叠栅层析技术测量超音速风洞中的非对称复杂密度场

使用叠栅层析技术解决超音速风洞中复杂密度场的测量难题。应用高灵敏度叠栅偏折仪和间隔角度旋转模型的方法获取超音速风洞中流场的多方向叠栅条纹图。层析计算中使用一种新的偏折角修正迭代的叠栅层析算法,该方法可以实现对有限角采样和包含遮挡物的非完全数据重建,迭代过程中结合内边界平滑滤波提高重建精度。实验中获取了马赫数为2.52的超音速风洞中9幅不同采样角的条纹图,经过50次迭代计算后重建出膨胀波区非对称密度场的截面分布,并对测量结果和误差进行了分析和讨论。使用计算流体力学技术对该密度场进行建模和计算,验证了叠栅层析重建结果的正确性,证实了该技术在测量复杂流场领域的重要价值。     

Bone Dimensional Change Following Immediate Implant Placement in Posterior Teeth with CBCT: A 6-Month Prospective Clinical Study

This prospective clinical study aimed to evaluate the peri-implant hard tissue dimensional change at 6 months of immediate implant placement with bone graft materials in the posterior area using cone-beam computed tomography (CBCT). Twelve dental implants were placed concurrently following tooth extraction in the posterior area and filled with xenograft particles. The CBCT images were taken immediately after surgical procedures and then at 6 months follow-up. To evaluate the hard tissue changes, the vertical and horizontal bone thickness were analyzed and measured using ImageJ software. Paired t-test or Wilcoxon match-pair signed-rank test was done to analyze the changes of hard tissue values at the same level between immediately and 6 months following immediate implant placement. Independent t-test or Mann–Whitney U test was used to analyze the dimensional change in the vertical and horizontal direction in buccal and lingual aspects. The level of significance was set at p value = 0.05. All implants were successfully osseointegrated. At 6 months follow-up, the vertical bone change at the buccal aspect was −0.69 mm and at the lingual aspect −0.39 mm. For horizontal bone thickness, the bone dimensional changes at 0, 1, 5, and 9 mm levels from the implant platform were −0.62 mm, −0.70 mm, −0.24 mm, and −0.22 mm, respectively. A significant bone reduction was observed in all measurement levels during the 6 months after implant placement (p value < 0.05). It was noted that even with bone grafting, a decrease in bone thickness was seen following the immediate implant placement. Therefore, this technique can be an alternative method to place the implant in the posterior area.     

Optimization of STEM-HAADF Electron Tomography Reconstructions by Parameter Selection in Compressed Sensing Total Variation Minimization-Based Algorithms

A novel procedure to optimize the 3D morphological characterization of nanomaterials by means of high angle annular dark field scanning-transmission electron tomography is reported and is successfully applied to the analysis of a metal- and halogen-free ordered mesoporous carbon material. The new method is based on a selection of the two parameters (μ and β) which are key in the reconstruction of tomographic series by means of total variation minimization (TVM). The parameter-selected TVM reconstructions obtained using this approach clearly reveal the porous structure of the carbon-based material as consisting of a network of parallel, straight channels of ≈6 nm diameter ordered in a honeycomb-type arrangement. Such an unusual structure cannot be retrieved from a TVM 3D reconstruction using default reconstruction values. Moreover, segmentation and further quantification of the optimized 3D tomographic reconstruction provide values for different textural parameters, such as pore size distribution and specific pore volume that match very closely with those determined by macroscopic physisorption techniques. The approach developed can be extended to other reconstruction models in which the final result is influenced by parameter choice.     

The Influence of Visual and Spatial Reasoning in Interpreting Simulated 3D Worlds

This paper explores the way in which young children (6 year olds) made sense of screen-based images on the computer. The participants were required to interpret 3D-like representations and relate these images to objects in their environment. Both static and relatively dynamic software programs were used in the investigation. Some of the children could not make links between the screen representation and the intended three-dimensional (3D) objects. It is argued that young children should be exposed to activities that establish explicit links between 2D and 3D objects ``away' from the computer before attempting the more difficult links required to interpret and represent 3D objects in ICT contexts. This revised version was published online in July 2006 with corrections to the Cover Date.     

从对比中更好地把握微积分的教学改革

美国微积分教学改革的许多方面值得借鉴.从对比的角度反思微积分教改的不足和差距,以便更好地把握今后的教改工作,明确在点点滴滴的教学过程中,应当实实在在地做些什么、怎么做.     

基于逆卷积神经网络的等离子体辐射分布断层重建方法

发展了一种基于逆卷积神经网络的图像级重建方法用于聚变等离子体辐射分布的断层反演.通过引入结构相似度(SSIM)作为损失函数,该方法在模拟数据实验中表现出了较好的重建效果.模拟实验结果表明,在弦积分信号噪声强度为10％、15％及20％时,该方法的重建结果依然具有良好的精确度和鲁棒性.     

沿直线分布电荷体系电场线的解析解

通过求解电场线所满足的微分方程,得到了沿直线分布电荷体系电场线的严格解析解,根据所得电场线簇方程,讨论了各种沿直线分布电荷体系的电场线特点,并在计算机上利用Mathematica软件绘出了相应的电场线分布图.