Møller-Plesset (MP2) perturbation theory for large molecules

Summary A novel formulation of MP2 theory is presented which starts from the Laplace transform MP2 ansatz, and subsequently moves from a molecular orbital (MO) representation to an atomic orbital (AO) representation. Consequently, the new formulation is denoted AO-MP2. As in traditional MP2 approaches electron repulsion integrals still need to be transformed. Strict bounds on the individual MP2 energy contribution of each intermediate four-index quantity allow to screen off numerically insignificant integrals with a single threshold parameter. Implicit in our formulation is a bound to two-particle density matrix elements. For small molecules the computational cost for AO-MP2 calculations is about a factor of 100 higher than for traditional MO-based approaches, but due to screening the computational effort in larger systems will only grow with the fourth power of the size of the system (or less) as is demonstrated both in theory and in application. MP2 calculations on (non-metallic) crystalline systems seem to be a feasible extension of the Laplace transform approach. In large molecules the AO-MP2 ansatz allows massively parallel MP2 calculations without input/output of four-index quantities provided that each processor has in-core memory for a limited number of two-index quantities. Energy gradient formulas for the AO-MP2 approach are derived.Dedicated to Prof. W. Kutzelnigg whose books on theoretical chemistry aroused my interest in this field     

Second‐harmonic response of a series of chiral polyesters: A joint experimental and theoretical study

A series of polyesters with π‐conjugated donor–acceptor segments was synthesized by the condensation of azobenzene‐4,4′‐dicarbonylchloride with 1,4:3,6‐dianhydro‐D‐sorbitol ([α] = + 42.5°) and biphenolic chromophores, bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylmethane and bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylsulfone. The polymers were characterized by spectral methods (IR, ultraviolet–visible, and NMR), thermal methods (thermogravimetry and differential scanning calorimetry), wide‐angle X‐ray scattering, and polarimetry. The polymers containing isosorbide units were optically active and crystalline. They exhibited glass‐transition temperature values between 100 and 160 °C and were stable up to 400 °C. The second‐harmonic generation (SHG) efficiency of the polymers was experimentally verified by a powder‐reflection technique with 2‐methyl‐4‐nitroaniline as a reference. The SHG efficiencies of the polymers were compared to those of the chromophores and explained as a function of the percentage of chiral composition. The hyperpolarizability β values were also determined by a two‐level model solvatochromic method and computational methods. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2868–2877, 2002     

氢化物发生石墨炉原子吸收光谱法直接测定高温镍基合金中的硒

在６ｍｏｌ／Ｌ盐酸介质和０．１％ＫＢＨ４条件下，不但能有效地发生硒的氢化物，而且５ｍｇ／ｍｌＮｉ和３ｍｇ／ｍｌＦｅ都不干扰硒的测定。利用涂钯石墨；管作为氢化物的原子化器，直接测定了高温镍基合金中的硒，特征质量为４０ｐｇ，相对标准偏差在６．１％以内，回收率在９７％－１１０％之间。     

Separation and sensitive determination of arsenic species (As/As) using the yeast-immobilized column and hydride generation in ICP–AES

Inorganic arsenic was separated using the yeast-immobilized column. Saccharomyces cerevisiae was covalently bonded unto the controlled pore glass, which showed selective preconcentration of As⁵⁺ over As³⁺. The effluent was directly connected to hydride generation (HG) to increase sensitivity. The optimum pH condition for the retainment of arsenic at the column was 7. As⁵⁺ and As³⁺ were completely separated in a few minutes with the flow rate of 1.5 ml min⁻¹. Three molars of nitric acid was adequate both for the elution of As⁵⁺ and hydride generation. The accuracy of the technique was tested with NIST SRMs. Quantitative analysis of arsenic species for herbicide, pesticide, and cigarette were performed, and the results showed good agreements with the suggested values. Yeast-immobilized column-HG-ICP showed a promising future for the arsenic speciation study.     

Synthesis and Structure of the New Ammonium Indium Phosphate (NH4)In(OH)PO4

A new ammonium indium phosphate (NH₄)In(OH)PO₄ was prepared by hydrothermal reaction in the In₂O₃-NH₄H₂PO₄-NH₃/OH system (T=200°C, autogenous pressure, 7 days). The formula (NH₄)In(OH)PO₄ was determined on the basis of chemical and thermal analysis (TG/DSC), X-ray powder diffraction and IR-spectroscopy. (NH₄)In(OH)PO₄ crystallizes in the tetragonal system with space group P4₃2₁2 (No. 96); a=9.4232(1) Å, c=11.1766(1) Å, V=992.45(2) ų; Z=8. The crystal structure was refined by the Rietveld method (R_w=6.35%, R_p=5.10%). The second-harmonic generation study confirmed that structure of (NH₄)In(OH)PO₄ does not have a center of symmetry. The cis-InO₄(OH)₂ octahedra form helical chains, parallel to the c-axis. The In-O-In bonds are nearly equidistant. The chains are interconnected by phosphate tetrahedra and create tunnels containing the NH₄⁺ ions along the c-axis. (NH₄)In(OH)PO₄ is isostructural with RbIn(OH)PO₄.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Second-order nonlinear optical properties of side-chain liquid crystalline polymers studied by second harmonic generation from thin films

The two independent elements of the second-order nonlinear optical susceptibility tensor of a range of contact poled, donor–acceptor substitued side-chain polymers are reported. The susceptibilities were measured by second harmonic generation from thin films, typically less than 0.5 μm thick, at a fundamental wavelength of 1064 nm. The largest value was χ = 2.64 pm/V which is three times greater than the χ value of KDP and was measured in a nitrobenzylidene side chain, polyhydroxystyrene polymer with an eleven unit alkyl chain spacer attaching the side group to the backbone. Typical susceptibility values obtained were χ～0.3 pm/V and X⁽²⁾₃₃～1 pm/V. The coherence lengths of the materials, which lay in the range 4–12 μm, were measured at 1064 nm by the maker fringe technique using thick, wedge-shaped samples.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

Synthesis of well‐defined second‐generation dendritic polymers of isoprene (I) and styrene (S): (S2I)3, (SI′I)3, (I″I′I)3, and (I′2I)4

The synthesis of second‐generation (G‐2) dendritic polymers of isoprene (I) and styrene (S) was achieved with anionic polymerization high‐vacuum techniques and by performing the following steps: (1) selective reaction of a living chain with the chlorosilane group of 4‐(chlorodimethylsilyl)styrene (a dual‐functionality compound) to produce a macromonomer, (2) addition of a second living chain (same or different) to the double bond of the macromonomer, (3) polymerization of I with the anionic sites, and (4) reaction of the produced off‐center living species with trichloromethyl silane or tetrachlorosilane (CH₃SiCl₃ or SiCl₄). The combined characterization results showed that the G‐2 dendritic macromolecules synthesized—(S₂I)₃, (SI′I)₃, (I″I′I)₃, (I′₂I)₄—have a high molecular and compositional homogeneity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1519–1526, 2002