垂直上升管内液体横掠流动传热特性研究

本文对单相水和单相油横掠流动时的平均换热特性进行了实验研究,对试验的结果进行了分析和讨论,并对实验数据进行关联,得到了垂直上升管内单相水和单相油横掠流动时的换热准则关系式。结果表明,狭窄空间条件下的液体横掠柱体时的流动换热对液相Re数的依赖,较大空间条件下的流动换热相比明显减小,并对单相水和单相油横掠流动时的换热性能进行了比较。     

微型硅谐振式力传感器的振动分析

介绍了谐振式力传感器的工作原理，并从理论上和实验上对中科院合肥智能所研制的第一代微型硅谐振梁（３×０．４×０．０４５ｍｍ＾３）式测力传感器进行了全面的振动分析，所得结构为其进一步优化设计提供了科学根据，文中使用的实验分析方法，为其它微小物体的动态和识别提供了一条有效途径。     

用模糊综合评价值作为单纯形优化指标

本文介绍了一个模糊综合评价方法,讨论了模糊运算方法对运算结果即综合评价值的影响,并将模糊综合评价值用作单纯形优化指标。     

抗肿瘤药物氮三乙酰肼和金属离子配位能力的研究

本文研究了抗癌药物氮三乙酰肼(Nitrilotriacetic hydrizide,NTH)和生命必需元素以及Al~(3 ),Ga~(3 ),In~(3 )的配位能力并用pH电位法测定了它们在生理条件下(37℃,Ⅰ=150mM dm~(-3)NaCl)的配合物生成常数。电位滴定数据是用ZPLOT,MINIQUAD,ESTA等计算机程序处理的。实验结果表明NTH与它的非生理活性的母体化合物氮三乙酸相比较,对Zn~(2 ),Mn~(2 )等过渡元素的配位能力表现较大的差异性。这种情况在Revercan,ICRF-198,ICRF-236和5-烯去甲基斑蝥酸等其他抗肿瘤活性化合物中也曾观察到。 NTH与三价金属Fe~(3 ),Ga~(3 ),Al(3 )和In~(3 )等有较大的配位能力,这与它的烯醇式结构有关。由于这些配合物在广泛的pH范围内生成,以及它的高稳定性,因此有可能被用作为肿瘤定位试剂或生物体营养元素铁传输的有效载体。     

正交试验法优化CS汽化吸附条件

通过正交试验设计,优化了影响西埃斯(CS)标准样品管制备的参数:汽化温度、采样流速、采样时间。结果表明,CS标准样品管的最佳吸附条件为汽化吸附温度:260℃,采样N2流速:330mL/min,采样时间:15min。在15~1500ng范围内,色谱峰面积与进样量有良好的线性关系,线性相关系数为0.9995,检出限为6.0ng。     

过渡金属离子对HPAsMoVO杂多酸的氧化性能的影响

用H2-TPR方法研究了过渡金属离子及其含量对杂多酸-HxPAs0.2Mo10VOy的氧化性能的影响,并在固定床反应器上考察了M0.2HxPAs0.2Mo10VOy(M=Fe3 、Co2 、N i2 和Cu2 )催化剂对异丁烷选择性氧化的催化性能.研究结果表明用过渡金属离子取代杂多酸中的质子,可以在较大程度上增强杂多酸的低温氧化能力,其中Fe3 对增强杂多酸的催化活性最为明显,而Cu2 却有利于提高目的产物甲基丙烯酸的选择性.     

Compatibility Studies of Multicomponent Tablet Formulations. DSC and experimental mixture design

An experimental mixture design was applied to a differential scanning calorimetry (DSC) study performed to evaluate naproxen compatibility in tablet formulations consisting of four classic excipients (sorbitol, sodium carboxymethylcellulose, poly(ethylene glycol) 20000 and Veegum) each in adequate concentration ranges accounting for the relevant values actually used in pharmaceutical formulations. Twenty-seven different tablets were obtained from as many mixtures prepared according to the experimental design plan and analyzed in a random order by DSC. Statistical evaluation of experimental data enabled correlation of both enthalpy and onset temperature variations of drug melting endotherm (selected as responses indicative of the presence of drug-excipient interactions) with the mixture composition. Variance analysis (Anova) confirmed the reliability of the postulated polynomial model in providing adequate prediction of true system behaviour. This revised version was published online in August 2006 with corrections to the Cover Date.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Synthesis and thermal stability of silicon-containing esters of phosphorus acids

A number of trialkylsilylmethyl diphenyl phosphates MeRR′SiCH₂OP(O)(OPh)₂ (1a-e: R=Et (a), Pr (b), CF₃CH₂CH₂ (c, e), Me₃SiCH₂ (d); R′=Me (a-d), Et (e)) were synthesized and their thermal rearrangement, of the 1,2-shift type, was studied. The rearrangement consists of the migration of an alkyl group from Si atom to the methylene carbon atom and gives the corresponding silyl esters. The rate of the rearrangement was found to increase in the order1d<1b<1a<1 (R=R′=Me)<1c corresponding to the enhancement of the total inductive effect (−I) of the substituents at the Si atom. The relative migration ability of the substituents at the Si atom, determined by GC/MS analysis of the disiloxane fraction resulting from hydrolysis of pyrolyzed phosphates1a-e, increases in the order R=Pr<Et<CF₃CH₂CH₂<Me≪Me₃SiCH₂, which differs substantially from the order in which the rate of the rearrangement of phosphates1a-d changes. The electronegativity of the migrating group affects noticeably the relative ability to migrate. For Part 4, see Ref. 1. Deceased. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 1767–1772, September, 1998.     

Plasma Thermal Conversion of Methane to Acetylene

This paper describes a re-examination of a known process for the direct plasma thermal conversion of methane to acetylene. Conversion efficiencies (% methane converted) approached 100% and acetylene yields in the 90–95% range with 2–4% solid carbon production were demonstrated. Specificity for acetylene was higher than in prior work. Improvements in conversion efficiency, yield, and specificity were due primarily to improved injector design and reactant mixing, and minimization of temperature gradients and cold boundary layers. At the 60-kilowatt scale cooling by wall heat transfer appears to be sufficient to quench the product stream and prevent further reaction of acetylene resulting in the formation of heavier hydrocarbon products or solid carbon. Significantly increasing the quenching rate by aerodynamic expansion of the products through a converging–diverging nozzle led to a reduction in the yield of ethylene but had little effect on the yield of other hydrocarbon products. While greater product selectivity for acetylene has been demonstrated, the specific energy consumption per unit mass of acetylene produced was not improved upon. A kinetic model that includes the reaction mechanisms resulting in the formation of acetylene and heavier hydrocarbons, through benzene, is described.