复合材料光弹性分析的近似方法

本文提出了一种用于光弹性复合材料的简化应变——光学定律。按照这一简化定律。模型材料的主应变差和主应变方向只要利用光弹性实验测出的等差线与等倾线即可求得。些是一种正交异性光弹性分析的近似方法,这一方法所得结果与实验数据比较,最大误差在10％左右。由于采用简化应变——光学定律使得正交异性光弹性分析工作大为简便,因此它是一种适合于工程应用的近似方法。     

The shear modulus in the fiber direction of unidirectional fiber composites based on the concept of mesophase

A new and accurate relationship for the shear modulus in the fiber direction of unidirectional fiber composites is derived, based on the Kerner model concepts but not using its approximate relationships. Furthermore, this model is extended by taking into account the mesophase between the fiber and the matrix accomodating smoothly the mechanical properties between neighbouring phases. The introduction of the mesophase results in an improvement of the theoretical predictions, which now approach close to experimental values for the moduli of different fibrous composites.     

气相法二氧化硅负载胺-钯配合物的制备及对Heck反应催化性能的研究

以气相法二氧化硅为载体,链状胺和环胺为功能化试剂,制得一系列二氧化硅-胺基复合载体,通过配位反应得到二氧化硅负载胺-钯（Ⅱ）配合物,进一步还原得到二氧化硅负载胺-钯（0）配合物．采用IR、XRD、XPS、ICP技术对配合物进行表征,并研究了配合物的制备、反应条件以及配体差异对其催化碘苯与丙烯酸的Heck反应的性能．结果表明,该类催化剂在较低的温度下（70～90℃）即可较好地催化该反应,生成反式产物;还原后催化剂具有更好的催化活性和良好的重复使用性能;具有链状胺基配体的催化剂随着N原子数目的增加,催化活性呈上升趋势,而具有环状胺基配体的催化剂活性明显低于前者．     

稀土催化NB与BMA共聚条件的研究

研究了Nd（naph）3-Al（i-Bu）3（naph为环烷酸）催化降冰片烯（NB）与甲基丙烯酸丁酯（BMA）共聚反应的条件及其催化剂钕铝比的影响.结果表明：稀土催化剂在温和的反应条件下有较好的催化性能;共聚反应可以在室温下进行,反应温度的增加使共聚物收率略减;共聚物分子量和分子量分布随NB/MA摩尔比的增加而变小,共聚物分子量分布较小,Mw/Mn=1.65～2.22;共聚物收率随Al/Nd摩尔比而变化,较合适的Al/Nd摩尔比为5.5.     

金属介质复合结构目标电磁散射特性

基于体-面混合积分方程方法,研究了介质导体复合结构目标的电磁散射特性.对导体采用面积分方程,对介质应用体积分方程,由等效原理建立以导体面电流及任意非均匀介质体极化电流为未知量的矩阵方程,利用稳定的双共轭梯度并结合快速傅立叶变换技术(BiCGS-FFT)来加速矩阵方程求解,相对于传统的矩量法大大降低了计算时间和内存需求.数值结果验证了该方法的正确性.同时,它为复杂复合结构目标散射特性研究奠定了一定的基础.     

合成氨催化剂研究的新进展

 近20多年来,随着英国BP公司钌基催化剂的发明和我国亚铁基熔铁催化剂体系的创立,标志着合成氨催化剂进入了一个新的发展时期,由唯一的传统Fe3O4路线发展为三条技术路线,并各自取得了重大进展．本文扼要介绍了Fe3O4基传统催化剂和钌基催化剂的主要研究成果和发展趋势,着重综述了我国独创的Fe1－xO基熔铁催化剂的发现及其高活性机理探讨方面的研究成果．回顾了20世纪合成氨工业及其催化剂从创立、发展,到取得辉煌成就的历程,展望了21世纪的发展趋势．     

催化剂薄层内甲烷水蒸气重整反应强化管内对流换热的数值模拟

本文以竖直圆管内壁催化剂薄层内发生甲烷水蒸气重整反应强化对流换热作为研究对象,对其进行了数值模拟．结果发现,催化剂薄层内的吸热化学反应可以有效地强化对流换热,降低流体和壁面温度,从而对壁面起到保护作用;极限热流密度的大小与流体的入口温度有关,存在最佳入口温度使极限热流密度最大．     

基于空气争化的介孔纳米TiO2的应用研究

本研究创建连续流动气相光催化实验系统,采用动态配气法生成一定低浓度的甲醛气体,开发利用介孔纳米TiO2为光催化材料,以促进利用光催化技术应用于消除室内有害污染气体更具实际意义和商业价值.研究表明,以非表面活性剂有机小分子三乙醇胺为模板剂制得了介孔TiO2材料,其粒径在20～30 nm之间;通过控制气流速度为7.5 cm/s以消除传质对反应的影响,在相对湿度为28%和反应温度为25℃的条件下,相对具有相近吸光性能和粒度的DegussaP25,介孔纳米TiO2具有更高的光催化降解甲醛的反应效率.     

Catalytic effect of water,water dimer,water trimer,HCOOH, H2SO4, CH3CH2COOH and HN(NO2)2 on the isomerisation of HN(NO2)2 to O2NNN(O)OH: a mechanism study

In this article, the isomerisation mechanisms of HN(NO₂)₂ to O₂NNN(O)OH without and with catalyst X (X = H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄, CH₃CH₂COOH and HN(NO₂)₂) have been investigated theoretically at the CBS-QB3 level of theory. Our results show that the catalyst X (X = H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄ and CH₃CH₂COOH) shows different positive catalytic effects on reducing the apparent activation energy of the isomerisation reaction processes. Such different catalytic effects are mainly related to the number of hydrogen bonds and the size of the ring structure in X (X = H₂O, (H₂O)₂ and (H₂O)₃)-assisted transition states, as well as different values of pK_a for H₂SO₄, HCOOH and CH₃CH₂COOH. Very interesting is also the fact that H₂SO₄-assisted reaction is the most favourable for the hydrogen transfer from HN(NO₂)₂ to O₂NNN(O)OH, due to the smallest pK_a (?3.0) value of H₂SO₄ than H₂O, HCOOH, H₂SO₄ and CH₃CH₂COOH, and also because of the largest ∠X???H???Y (the angle between the hydrogen bond donor and acceptor) involved in H₂SO₄-assisted transition state. Compared to the self-catalysis of the isomerisation mechanisms of HN(NO₂)₂ to O₂NNN(O)OH, the apparent activation energy of H₂SO₄-assisted channel also reduces by 9.6 kcal?mol^?1, indicating that H₂SO₄ can affect the isomerisation of HN(NO₂)₂ to O₂NNN(O)OH, most obvious among all the catalysts H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄, CH₃CH₂COOH and HN(NO₂)₂.     

Preparation,characterization, and performance study of beeswax/expanded graphite composite as thermal storage material

In this study, beeswax as a new energy storage material and its composite with expanded graphite were prepared and characterized for their surface and thermal properties. Surface characterization showed no chemical interaction between beeswax and expanded graphite. The thermal conductivity of the composite was improved with 117% enhancement. The thermal performance of beeswax and its composite as a heat storage material was studied in a rectangular shell-and-tube thermal storage unit. The melting point of the composite remained almost same as that of beeswax; however, the melting time was reduced considerably, from 540 to 360 min with inlet water at 80°C and a 2-lpm flow rate.