层状磁电复合材料谐振频率下的巨磁电容效应

对三明治复合结构Tb_xDy_1-xFe_2-y/Pb(Zr, Ti)O₃/Tb_xDy_1-xFe_2-y的电容与频率及磁场的函数关系进行了实验和理论研究. 实验发现,该复合材料样品的电容随频率的增加而出现多个谐振峰,并且其谐振点随磁场的增加而发生频移. 在谐振点附近,观察到样品的阻抗随磁场的增加由容抗性转变为感抗性,从而同时观察到巨大的正磁电容效应和负磁电容效应. 由复合材料的弹性力学本构方程出发,对该类样品的电容随频率及磁场的变化进行了理论模拟. 结果显示,模拟曲线与实验结果符合得很好. 理论表明该磁致伸缩/压电复合材料的磁电容效应源于磁场诱变的铁磁相柔顺系数. 关键词： 层状复合材料 界面弹性耦合 磁电容效应     

稠油油藏试井理论研究

分析研究国内外稠油热采模型文献资料,总结归纳了9种稠油热采模型,主要包括非牛顿流体均质地层模型、二区复合模型、三区复合模型、多区复合模型、考虑重力超覆的数学模型以及干扰分析等,并对部分压力变化曲线及压力导数变化曲线做了简要的分析.比较各模型的优缺点,并指出目前的模型存在的问题以及稠油试井的发展趋势.     

The influence of geometry on the vibronic spectra of quantum aggregates

A study is presented of the localisation of excitonic states on extended molecular aggregates composed of identical monomers arising, not from disorder due to statistical energy shifts of the monomers, induced by environmental interactions (Anderson localisation), but rather simply due to changes in the orientation and geometrical arrangement of the transition dipoles. It is shown further that such small changes nevertheless can have a drastic effect on the shape of the vibronic spectrum of the aggregate. The vibronic spectra are calculated using the ‘coherent exciton scattering’ (CES) approximation whose derivation we generalise to be applicable to aggregates of arbitrary size and geometry.     

A Mixed-Transfer-Matrix Method for Simulating Normal Conductor/Perfect Insulator/Perfect Conductor Random Networks

We develop a mixed-transfer-matrix approach for computing the macroscopic conductivity of a three-constituent normal conductor/perfect insulator/perfect conductor random network. This is applied to two-dimensional and three-dimensional samples at a percolation threshold. Such networks are simulated in order to test whether a diluted percolating network of normal conducting bonds remains in the same universality class of critical behavior when a finite fraction of those bonds have been replaced by perfectly conducting bonds. Also tested by such simulations is whether a percolating mixture of normal and perfectly conducting bonds remains in the same universality class of critical behavior when a finite fraction of the normal bonds are replaced by perfectly insulating bonds. These questions are crucial for some recently published exact results which connect the macroscopic electrical and elastic responses of percolating networks.     

Modeling and simulation of mechanical properties of nano-particle filled materials

With the recent advances in nanoscale science and engineering, materials containing reinforcement with superior mechanical properties can be found in many advanced products. The accurate prediction of the mechanical properties of this class of composite materials is important to ensure the reliability of the products. Characterization methods based contact probe such as nano-indentation and scratch tests havebeen developed in recent years to measure the mechanical properties of the new class of nanomaterials. This paper presents a constitutive modeling framework for predicting the mechanical properties of nanoparticle reinforced composite materials. The formulation directly considers the effects of inter-nanoparticle interaction and performs a statistical averaging to the solution of the problem of two-nanoparticle interaction. Final constitutive equations are obtained in analytical closed form with no additional material parameters. The predictions from the proposed constitutive model are compared with experimental measurement from nano-indentation tests. This constitutive model for nanoparticle reinforced composites can be used to determine the volume concentration of the reinforcing nanoparticles in nano-indentation test.     

Synthesis and electrical characteristics of polyaniline nanoparticles and their polymeric composite

Monodisperse polyaniline nanoparticles (PAPSSA) were synthesized from an oxidative dispersion polymerization using poly(sodium 4-styrenesulfonate) (PSSA) as both a polymeric stabilizer and a dopant agent due to its acidity. The nanoparticles were being stabilized with two different molecular weight of PSSA. Size effect of PAPSSA particles were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The d.c. electrical conductivity of composite films on the glass substrate was measured by a four-probe method. It was found that the electrical properties of the composite films are affected by the content of nano-sized polyaniline and different molecular weights of stabilizer in the poly(vinyl alcohol) (PVA) matrix.     

铁磁复合对Bi2212相超导电性的抑制

我们成功制备了由高温超导Bi2212相和铁磁LCMO相两相复合的系列陶瓷样品．复合陶瓷样品的相分析表明无杂相生成，电阻温度曲线显示出铁磁性LCMO相对Bi2212相超导电性有显著抑制作用，随LCMO相含量增加，复合样品的超导转变温度逐渐降低，进而失去超导电性．在分析实验数据基础上，我们对铁磁性LCMO相对Bi2212相超导电性的影响进行了研究，并简要探讨了铁磁复合对Bi2212相超导电性抑制机理．     

Measuring particle size-dependent physicochemical structure in airborne single walled carbon nanotube agglomerates

As-produced single-walled carbon nanotube (SWCNT) material is a complex matrix of carbon nanotubes, bundles of nanotubes (nanoropes), non-tubular carbon and metal catalyst nanoparticles. The pulmonary toxicity of material released during manufacture and handling will depend on the partitioning and arrangement of these components within airborne particles. To probe the physicochemical structure of airborne SWCNT aggregates, a new technique was developed and applied to aerosolized as-produced material. Differential Mobility Analysis-classified aggregates were analyzed using an Aerosol Particle Mass Monitor, and a structural parameter Γ (proportional to the square of particle mobility diameter, divided by APM voltage) derived. Using information on the constituent components of the SWCNT, modal values of Γ were estimated for specific particle compositions and structures, and compared against measured values. Measured modal values of Γ for 150 nm mobility diameter aggregates suggested they were primarily composed of non-tubular carbon from one batch of material, and thin nanoropes from a second batch of material – these findings were confirmed using Transmission Electron Microscopy. Measured modal values of Γ for 31 nm mobility diameter aggregates indicated that they were comprised predominantly of thin carbon nanoropes with associated nanometer-diameter metal catalyst particles; there was no indication that either catalyst particles or non-tubular carbon particles were being preferentially released into the air. These results indicate that the physicochemistry of aerosol particles released while handling as-produced SWCNT may vary significantly by particle size and production batch, and that evaluations of potential health hazards need to account for this. Disclaimer: The mention of any company or product does not constitute an endorsement by the Centers for Disease Control and Prevention. The findings and conclusions in this paper are those of the authors and do not necessarily represent the views of the National Institute for Occupational Safety and Health.     

Study on the radial composite piezoelectric ceramic transducer in radial vibration

A new type of radial composite piezoelectric transducer in radial vibration is developed and analyzed. The radial composite transducer consists of a piezoelectric ceramic thin ring polarized in the thickness direction and a metal thin circular ring. They are connected together and excited to vibrate in the radial direction. The radial vibrations of a piezoelectric ceramic thin ring and a metal thin circular ring are analyzed, respectively. Their radial electro-mechanical equivalent circuits are obtained. Based on the electro-mechanical equivalent circuits and using the boundary conditions between the piezoelectric ceramic thin ring and the metal thin circular ring in the radial direction, the electro-mechanical equivalent circuit of the radial composite piezoelectric transducer is derived out and the resonance frequency equation is obtained. The relationship between the resonance frequency and the geometrical dimensions of the transducer is analyzed. Some radial composite piezoelectric transducers are designed and manufactured. The resonance frequencies and the anti-resonance frequencies, the electro-mechanical equivalent circuit parameters are measured. The effective electro-mechanical coupling coefficient and the mechanical quality factor are calculated. It is illustrated that the measured radial resonance frequencies are in good agreement with the theoretical results from the resonance frequency equation.     

Enhanced Efficiency of Polymer Light-Emitting Diodes by Dispersing Dehydrated Nanotube Titanic Acid in the Hole-buffer Layer

Efficiency of polymer light-emitting diodes (PLEDs) with poly(2-methoxy-5-(2-ethyl hexyloxy)-p-phenylene vinylene) (MEH-PPV) as an emitting layer was improved if a dehydrated nanotubed titanic acid (DNTA) doped hole-buffer layer polyethylene dioxythiophene (PEDOT) was used. Photoluminescence (PL) and Raman spectra indicated a stronger interaction between DNTA and sulfur atom in thiophene of PEDOT, which suppresses the chemical interaction between vinylene of MEH-PPV and thiophene of PEDOT. The interaction decreases the defect states in an interface region to result in enhancement in device efficiency, even though the hole transporting ability of PEDOT was decreased.