Evaluation of the SEBS copolymer in the compatibility of PP/ABS blends through mechanical,thermal, thermomechanical properties,and morphology

Polypropylene (PP) blends with acrylonitrile-butadiene-styrene (ABS) were prepared using the styrene-ethylene-butylene-styrene copolymer (SEBS) as a compatibilizing agent. The blends were prepared in a co-rotational twin-screw extruder and injection molded. Torque rheometry, Izod impact strength, tensile strength, heat deflection temperature (HDT), differential scanning calorimetry, thermogravimetry, and scanning electron microscopy properties were investigated. The results showed that there was an increase in the torque of PA6/ABS blends with SEBS addition. The PP/ABS/SEBS (60/25/15%) blend showed significant improvement in impact strength, elongation at break, thermal stability, and HDT compared with neat PP. The elastic modulus and tensile strength have not been significantly reduced. The degree of crystallinity and the crystalline melting temperature increased, indicating a nucleating effect of ABS. The PP/ABS blends compatibilized with 12.5% and 15% SEBS presented morphology with well-distributed fine ABS particles with good interfacial adhesion. As a result, thermal stability has been improved over pure PP and the mechanical properties have been increased, especially impact strength. In general, the addition of the SEBS copolymer as the PP/ABS blend compatibilizer has the advantage of refining the blend's morphology, increasing its toughness and thermal stability, without jeopardizing other PP properties.     

Pithecellobium Clypearia Benth Fiber/Recycled Acrylonitrile-Butadiene-Styrene (ABS) Composites Prepared in a Vane Extruder: Analysis of Mechanical Properties and Morphology

The effect of compatibilizer types and concentrations on the mechanical properties and morphology of Pithecellobium Clypearia Benth Fiber (PCBF)/recycled ABS composites prepared by a vane extruder were characterized. In addition, the percentage of compatibilizer was fixed at 8%, and the effect of lubricant concentrations on the mechanical properties and torque behaviors of the composites was also studied. Maleic anhydride grafted ABS (ABS-g-MAH) and maleic anhydride grafted PS (PS-g-MAH) were used as compatibilizers; the lubricant used was Struktol TPW 604 (blend of aliphatic carboxylic acid salts and mono diamides). The composite with 8% ABS-g-MAH showed superior mechanical properties compared to the composite without compatibilizer and the 8% PS-g-MAH compatibilized composites. Compared with PS-g-MAH, ABS-g-MAH was more effective for the composites to improve the interfacial interaction and mechanical properties. The comprehensive mechanical properties of PCBF/recycled ABS composite filled with 4% lubricant were better than the composites without lubricant and the composites with any other content of TPW 604. Moreover, the torque of the composites in an internal mixer decreased with an increasing lubricant content.     

sPS/PET/SsPS-H共混体系的研究

以自制间规聚苯乙烯(sPS)功能化合成的磺化间规聚苯乙烯（SsPS-H)作相容剂,研究其对sPS/PET共混物微相结构与性能的影响,发现SsPS-H能够有效地改善二者的相容性,当sPS/PET/SsPS-H为85／15／2（重量比）时,冲击强度达到11．4kJ/m^2,为纯sPS的3倍,此时材料的弯曲强度为39．1MPa,下降约8％;DMA结果表明,随SsPS-H用量的增加,共混物的Tg逐渐提高;DSC分析结果表明,共混体系中sPS的熔点不受SsPS-H含量的影响,而PET的熔点在加入6份SpPS-H时明显降低。sPS在达到最大结晶速率的温度均随SsPS-H用量的增加先提而后下降。SEM观察到加入SsPS-H后,PET分散相的尺寸减小,且均匀程度增加,共混物室温下冲击断裂显著地由脆性转变为韧性,当加入6份SsPS-H后,冲击断裂又出现脆性。     

Melt rheology and morphology of thermoplastic elastomers from polyethylene/nitrile‐rubber blends: The effect of blend ratio,reactive compatibilization,and dynamic vulcanization

A study of the melt‐rheological behavior of thermoplastic elastomers from high‐density polyethylene and acrylonitrile butadiene rubber (NBR) blends was carried out in a capillary rheometer. The effect of the blend ratio and shear rate on the melt viscosity reveals that the viscosity decreases with the shear rate but increases with NBR content. Compatibilization by maleic anhydride modified polyethylene has no significant effect on the blend viscosity, but a finer dispersion of the rubber is obtained, as is evident from scanning electron micrographs. The melt‐elasticity parameters, such as the die swell, principal normal stress difference, recoverable shear strain, and elastic shear modulus of the blends, were also evaluated. The effect of annealing on the morphology of the extrudate reveals that annealing in the extruder barrel results in the coalescence of rubber particles in the case of the incompatible blends, whereas the tendency toward agglomeration is somewhat suppressed in the compatibilized blends. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1104–1122, 2000     

可膨胀石墨阻燃体系在聚丙烯中的作用

采用可膨胀石墨(EG)为主阻燃剂,包裹红磷(MRP)为阻燃协效剂制备阻燃聚丙烯(PP)。在mEG∶mMRP≥2时,阻燃效果最佳。阻燃剂(FR)含量达到30%后,阻燃效果大幅度提高,氧指数大于28。采用热失重和流变学方法分析了炭层质量,探讨了在mEG∶mMRP≥2时,阻燃效率最高的原因。相容剂马来酸酐接枝聚丙烯(PP-g-MAH)能够改善阻燃剂和聚丙烯之间的相容性,提高粘结力,改善炭层质量,提高材料的氧指数,PP-g-MAH用量为30%时,材料的氧指数达到31.4。     

Mechanical properties and the two-phase structure inside the heterophase domains of blends from HDPE and SBS star block copolymers

Blends from polyethylene (PE) and polystyrene-b-polybutadiene-b-polystyrene star block copolymers (SBS) (thermoplastic elastomers) are studied with polyolefine recycling in view. Each component, dispersed in a heterogeneous blend, exhibits a two-phase morphology. This structure is investigated by small angle X-ray scattering (SAXS) and compared to mechanical properties as a function of SBS grade and content. Increasing the SBS content one observes a vanishing PE-related long period reflection, while an SBS-related peak emerges. Best mechanical properties are obtained at concentrations, where the width of the observed long period reflection is broadest. For a quantitative analysis of the SAXS, the interface distribution function (IDF) analysis is employed. Data are fitted with a function modeling arrangement as well as disorder of domains inside the two different kinds of dispersed grains. The analysis yields that the observed broadening of the long spacing peak is caused only by an increased fluctuation of the thicknesses of amorphous layers in the PE stacks. This fluctuation again decreases for SBS concentrations beyond 15 wt %. The effect is strongest for blends containing the SBS grade with the lowest molecular weight and is discussed in terms of its compatibilization effect. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1423–1432, 1998     

The compatibilization effect of ethylene/styrene interpolymer on polystyrene/polyethylene blends

In this study, ethylene/styrene interpolymer (ESI) was used as compatibilizer for the blends of polystyrene (PS) and low‐density polyethylene (LDPE). The mechanical properties including impact, tensile properties, and morphology of the blends were investigated by means of uniaxial tension, instrumented falling‐weight impact measurements, and scanning electron microscopy. Impact measurements indicated that the impact strength of the blends increases slowly with LDPE content up to 40 wt %; thereafter, it increases sharply with increasing LDPE content. The impact energy of the LDPE‐rich blends exceeded that of pure LDPE, implying that the LDPE polymer can be further toughened by the incorporation of brittle PS minor phase in the presence of ESI. Tensile tests showed that the yield strength of the PS/LDPE/ESI blends decreases considerably with increasing LDPE content. However, the elongation at break of the blends tended to increase significantly with increasing LDPE content. The compatibilization efficiency of ESI and polystyrene‐hydrogenated butadiene‐polystyrene triblock copolymers (SEBS) for PS/LDPE 50/50 was further compared. Mechanical properties show that ESI is more effective to achieve a combination of LDPE toughness and PS rigidity than SEBS. The correlation between the impact property and morphology of the ESI‐compatibilized PS/LDPE blends is discussed. The excellent tensile ductility of the LDPE‐rich blends resulted from shield yielding of the matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2136–2146, 2007     

Evaluation of ammonium terminated PMMA as compatibilizers for monomer casting polyamide6/clay nanocomposites

The compatibilization effects provided by ammonium terminated PMMA(PMMA‐t‐NH₃⁺) on monomer casting polyamide6 (MCPA6)/clay(pristine sodium montmorillonite) nanocomposites were studied in this article. PMMA‐t‐NH₃⁺ used in this study was prepared by radical polymerization using 2‐aminoethanethiol hydrochloride as chain transfer agent. MCPA6/clay/PMMA‐t‐NH₃⁺ nanocomposites were prepared by in situ anionic ring‐opening polymerization of ε‐caprolactam. X‐ray diffraction and transmission electron microscopy plus rheological measurement were used to characterize those nanocomposites. The results indicated that PMMA‐t‐NH₃⁺ would be a good compatibilizer for this system. With PMMA‐t‐NH₃⁺ content increasing, a better dispersion of clay was successfully achieved in the MCPA6 matrix. Furthermore, analysis using differential scanning calorimetry indicated that well dispersed clay layers limited the mobility of the MCPA6 molecule chains to crystallize, reduce the crystalline degree, and favor the formation of the γ‐crystalline form of the MCPA6 matrix. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1802–1810, 2008     

Ternary blends of phenoxy/SAN/poly(-ε-caprolactone)

The compatibilizing effect of poly(ε-caprolactone) (PCL) on the blends of two immiscible polymers, poly(hydroxy ether of bisphenol A) (phenoxy) and poly(styrene-co-acrylonitrile) (SAN) has been investigated. The phase behavior of the ternary blends was affected by the AN content in the SAN copolymers and a maximum miscible region was observed at 19.5 wt % of AN. The effect of AN content on the phase behavior of the ternary blends was interpreted in terms of the relative magnitude of the segmental interaction energy densities, which were obtained by combining a melting point depression and an extended binary interaction model. When a small amount of PCL was added to the phenoxy/SAN blends, the phase morphology showed a finer phase dispersion, indicating that the interfacial tension between the phenoxy and SAN is considerably reduced. However, the improvement in tensile properties was limited despite the morphological change with the PCL content. From the results of the DSC measurements, SEM, and tensile testing, it was understood that the PCL acted as a compatibilizer for the immiscible phenoxy/SAN blends. © 1994 John Wiley & Sons, Inc.