湍流燃烧二阶矩模型的大涡模拟验证

对美国Sandia国家实验室测量的甲烷-空气湍流射流火焰进行了三维大涡模拟(LES),其统计的时均量以及脉动量符合实验测量值,且和RANS代数二阶矩湍流燃烧模型模拟结果大致符合。LES统计得到的化学反应率系数脉动和甲烷浓度脉动的互关联与对应的时均量梯度的乘积分布趋势相同,大小幅值的位置也相对应,与二阶矩湍流燃烧模型的封闭假设相符,验证了二阶矩代数燃烧模型的合理性。     

Computation of moisture and temperature profiles in soil—The coupled model

The coupled model has been developed in this study for moisture transport and beat exchange in soil. The model is driven by atmospheric conditions measured in a field. The concept that soil has a surface resistance to evaporation is introduced in order to relate the evaporation from surface with the vapour flux in air. With the use of this concept, the simulation results agree quite well with the measured data.     

Multi‐dimensional combustion waves for Lewis number close to one

This paper is devoted to the study of multi‐dimensional travelling wave solution for a thermo‐diffusive model, describing the propagation of curved flames in an infinite cylinder. The linear dependence of the components of the reaction rate together with the existence of an ignition temperature ensure that the corresponding linearized operator does not satisfy the Fredholm property. A direct consequence is that solvability conditions for the linearized operator are not known and classical methods of nonlinear analysis cannot be directly applied. We prove in this paper existence results of such travelling waves, by first introducing a suitable re‐formulation of the equations and then by choosing suitable weighted spaces that allows us to move the essential spectrum away from zero. Copyright © 2006 John Wiley & Sons, Ltd.     

电阻温度系数的微机测定系统

本文介绍一种电阻温度系数微机测定实验的系统。     

气密性碳涂覆光纤筛选强度与电阻关系研究

通过实验分析确立了把光纤电阻作为衡量气密性碳涂覆光纤通过２％应变筛选的过渡标准。要拉制２％应变筛选的碳涂覆光纤，其电阻值应小于３０ｋΩ／ｃｍ。     

1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

An evolutionary method for optimization of plate buckling resistance

Optimization of plate buckling resistance is very complicated, because the in-plane stress resultants in the prebuckled state of a plate are functions of thickness distribution. This paper discusses the problem of finding the optimum thickness distribution of isotropic plate structures, with a given volume and layout, that would maximise the buckling load. A simple numerical method using the finite-element analysis is presented to obtain the optimum thickness distribution. Optimum designs of compression-loaded rectangular plates with different boundary conditions and plate aspect ratios are obtained by using the proposed method. Optimum designs from earlier studies and the methods of buckling analysis used to attain these results are discussed and compared with the designs from the proposed method. This paper also examines the reliability of the optimality criterion generally used for plate buckling optimization, which is based on the uniform strain energy density.     

河南贫煤不同温度燃烧烟气中环烃类产物的分析研究

本文用色谱／质谱／红外联用系统研究了河南贫煤在不同温度下燃烧释放的烟气二氯甲烷富集液中的脂环烃，苯系物，多环芳烃及杂多环芳烃等环烃类物的组成和差异，尤其是对多环芳烃的种类，含量及分布特征进行了较详细的探讨。并与原煤常温二氯甲烷浸取中各化合物组成进行了对照。     

A supported gold catalyst for the elimination of hydrogen from CO2 feed gas in the production of urea

Supported gold catalyst for eliminating hydrogen from CO₂ feed gas in the production of urea is found to be superior to other industrial catalysts (e.g. Pt/Al₂O₃ and PdPt/Al₂O₃) in catalytic activity and resistance to sulfur poisoning.     

The gas phase reaction between CO2 and lanthanide atoms. A test of a model for the isokinetic effect

Summary Co₃O₄, NiCo₂O₄ and LaCo₂O₄catalysts were synthesizedby the citric acid-ligated method. These catalysts containing Co-oxide active components can largely lower the temperature of soot combustion under tight contact conditions. Under the conditions of loose contact NiCo₂O₄ cannot promote soot combustion, but LaCo₂O₄ can effectively promote soot combustion because the nanometric perovskite-type catalyst LaCoO₃produced in the LaCo₂O₄sample.</o:p>